Need help (no duh)


Recommended Posts

Basically I ripped my brother's PC apart and used it's meatier bits to upgrade my pc. Basically all I got was the DVD drive and his HD. The DVD drive is working fine but for some reason my PC no longer recognises that existance of my CD rewriter. Whereas the CD drive was D:, now the DVD drive is D: and the CD drive is just not shown.

Windows help was about as much use as a knife up the ass so I'm here pleading with you guys to see if you can help.

Link to comment
https://www.neowin.net/forum/topic/193219-need-help-no-duh/
Share on other sites

1) Check bios configuration, does all of your ide are enable and on auto-detection? (If bios doesn't detect 1 of your drive on startup, that doesn't help!)

2) Try uninstalling every drive from your computer via system properties in safe mode (except hd)

3) Check your jumper configuration, are there any conflicting configuration (both on master or slave)

4) Check ide capable (maybe upside down?)

5) Check pin of drive (some ide cable have blocked pin so when you put them on the wrong side, you punch a pin in your drive, putting it useless... there should be only 1 pin "missing" in the drive)

BTW, it's geeks and not nerds...

Link to comment
https://www.neowin.net/forum/topic/193219-need-help-no-duh/#findComment-2531550
Share on other sites

The Loading screen comes up the second the PC power switch goes on

press power and start pressing "del" or "f2" like mad until the BIOS comes up....and maybe it's just your monitor that's displaying it slowly....so next time you turn on your PC try turning on the monitor and letting it "warm up" for a couple of seconds then turn it on and you'll be able to see the POST and Video BIOS and stuff...cuz you won't just jump right into the loading screen

Link to comment
https://www.neowin.net/forum/topic/193219-need-help-no-duh/#findComment-2531661
Share on other sites

The Loading screen comes up the second the PC power switch goes on

I doubt about it, every pc have a bios... The only one that need something special is old compaq deskpro computer that are 400 mhz and less... these require a floppy, but still, they take 5 minutes to get to windows loading screen...

Do this:

1) Press power on your computer

2) Press and Press and Press (don't old, press many time and don't stop until you see the bios or windows startup) the "DEL" key right after pressing the power switch (don't care that the monitor isn't light up, that don't mean your computer isn't booting)

You should get to the bios...

If it doesn't work, try with F2 and ESCAPE...

You can also use the "Break" key, which allow you to stop the loading of the bios before the windows screen load, so you can see if it's another key then those 3.

Link to comment
https://www.neowin.net/forum/topic/193219-need-help-no-duh/#findComment-2531675
Share on other sites

that is not the fact, 3 plugs DOESN'T exist in IDE... here is how IDE works:

You have 2 IDE bay, IDE Primary and Secondary.

Each bay have 2 subbay, Master/Slave...

How much pin are there in your drive? (for the cable)

*edit

You can also check in "system properties" in "hard drive" to know if your hd are SCSI/IDE/SATA

Link to comment
https://www.neowin.net/forum/topic/193219-need-help-no-duh/#findComment-2531766
Share on other sites

Long ribbon cable, 3 plugs, go figure

You didn't plug from DVD to CD to Hard Drive, did you?

An IDE cable has 3 plugs, but one of them goes to the motherboard.

[EDIT: If your cable has more than 1 plug for the mother board, and 2 device connections (total of 3), then it isn't an IDE cable. Certainly not one that will work. IDE supports only ONE master, and ONE optional slave device. You cannot add a third device on a single channel.]

Link to comment
https://www.neowin.net/forum/topic/193219-need-help-no-duh/#findComment-2531822
Share on other sites

You didn't plug from DVD to CD to Hard Drive, did you?

An IDE cable has 3 plugs, but one of them goes to the motherboard.

oh dam.... didn't think 'bout that lol... never though this could be thinked by someone.... but... I don't think he did that by the fact that he see the rest of the devices, there is only 1 missing...

got a secondary IDE, not got a decent computer shop for quite a long distance and it's going to take a while to get to a good one. Sod it if neowin can't help then I am well and truly buggered

I doubt 'bout it since my 286 have 2 ide bay...

If you have all those thing in that computer, you must have 2 bay... you won't even be able to look at that board if you haven't a board with 2 ide...

*edit

I just remember something, try putting all your drive (except the master) to "cable select" in the jumper conf instead of slave...

Link to comment
https://www.neowin.net/forum/topic/193219-need-help-no-duh/#findComment-2531832
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Meta announces a major leadership change at WhatsApp by Pradeep Viswanathan Meta has announced a major leadership change at WhatsApp, with Will Cathcart stepping down after seven years of leading the world's largest messaging platform. CRED CEO and founder Kunal Shah will take over as the next global head of WhatsApp. CRED is an Indian fintech company focused on creditworthy consumers. As part of the transition, Meta is also making a minority investment in CRED through its Series H funding round. Meta CEO Mark Zuckerberg said Will Cathcart will remain at Meta and move into a new role focused on building new products from the ground up. Cathcart led WhatsApp during a major growth phase, helping the app reach more than 3 billion users worldwide. He also played a key role in expanding WhatsApp’s business offerings while keeping privacy and end-to-end encryption central to the product. Meta’s Chief Product Officer, Chris Cox, said Kunal Shah was selected after a search for a leader who understands WhatsApp’s global scale and future potential. In a leaked internal memo, Cox described Shah as a “serial founder” and one of India’s most respected entrepreneurs, adding that he brings “entrepreneurial energy” and a strong product mindset to the role. As part of the Series H funding round, CRED is raising ₹8,550 crore, or about $900 million, in a round led by Meta. The funding values CRED at ₹43,239 crore, or about $4.5 billion, on a post-money basis. It is important to note that this investment will not give Meta access to CRED customer information. Kunal posted the following on X regarding his new role at Meta: Although Kunal Shah will be stepping away from his operating role as CRED CEO, he will retain his personal shareholding in the company.
    • It wouldn't be hard for me to turn off my TV, if I had one. For one thing, I never scroll Instagram. The only reason I have an account is because Meta created one when it merged the account systems for its various services.
    • OpenAI's new GPT-5.5-Cyber tops Claude Mythos 5 in vulnerability benchmark by Pradeep Viswanathan OpenAI today announced a major expansion of Daybreak, a cybersecurity initiative designed to help defenders find, validate, and fix software vulnerabilities earlier in the development process. The availability of powerful AI models has definitely changed the cybersecurity landscape by making vulnerability discovery much faster. However, the bigger bottleneck for the industry is now patching those vulnerabilities. Impacted software teams need to validate the discovered issues, understand their impact, develop fixes, test them, and deploy patches. Back in March, OpenAI launched a preview of Codex Security, which uses agentic reasoning with automated validation to discover high-impact issues and actionable fixes specific to the codebase. Since then, it has scanned more than 30 million commits across over 30,000 codebases; more than 70,000 findings were marked as fixed by human reviewers, while over 500,000 findings were automatically determined to be fixed. Now, OpenAI is releasing an updated Codex Security plugin that can run deep scans, review recent code changes, generate security reports, trace attack paths, validate findings, and create codebase-specific patches for human review. It can also triage findings from existing scanners, advisories, bug bounty reports, and ticketing systems. OpenAI says the plugin can export results to vulnerability management systems and integrate with workflows using SARIF files, CodeQL queries, the Codex CLI, and the Codex app. Back in May, OpenAI announced the preview of GPT-5.5-Cyber, a new model built on top of the recently released GPT-5.5, designed for specialized cybersecurity work. Today, OpenAI launched the full version of GPT-5.5-Cyber through a limited release for verified defenders. On CyberGym, GPT-5.5-Cyber scored 85.6%, compared with 81.8% for GPT-5.5 and 83.8% for Claude Mythos 5. It also scored 39.5% on ExploitGym, compared with 25.95% for GPT-5.5, and 69.8% on SEC-bench Pro, compared with 63.1%. OpenAI also announced the new Daybreak Cyber Partner Program, which will allow security vendors and service providers to use GPT-5.5 with Trusted Access for Cyber in their products and services. Accenture, Akamai, Cisco, Cloudflare, CrowdStrike, IBM, Palo Alto Networks, Proofpoint, SentinelOne, Wiz, Zscaler, and others were listed as initial partners for this program. OpenAI is also launching Patch the Planet with Trail of Bits, HackerOne, Calif, researchers, and maintainers. More than 30 open-source projects have committed to participate, including cURL, Go, Python, Sigstore, and pyca/cryptography.
    • AMD confirms 26.6.2 FSR driver breaks on many Windows PCs by Sayan Sen Earlier today AMD released a major graphics driver update as it brings support for FSR 4.1 to Radeon RX 7000 series GPUs. The new update, version 26.6.2, also brings support for Assassin's Creed Black Flag Resynced and more. And while the driver technically supports Windows 10 version 21H2 and newer, the tech giant has confirmed that there is a major issue with the new driver on non-Windows 11 PCs as it fails to launch properly on such systems. The error message says, "The version of AMD Software that you have launched is not compatible with your currently installed AMD graphics driver." Therefore on the surface it looks like a compatibility problem. AMD has also confirmed that the device manager will display the yellow bang or yellow exclamation sign alongside your GPU under the Display adapters dropdown. Here is what the Radeon team's official advisory recommends to affected users: "Users Running Windows 10 and AMD Software: Adrenalin Edition 26.6.2 May Encounter Yellow Bang in Device Manager Affecting AMD Radeon RX Series Graphics ... Our Engineers are currently investigating this issue and will provide a fix once it is available. Affected users may revert to AMD Software: Adrenalin Edition 26.6.1 as a temporary workaround." As such you should revert back to the previous 26.6.1 driver which was released earlier this month. In case you were looking to play Assassin's Creed Black Flag Resynced and DOOM: The Dark Ages | Revelations you will probably have to wait a while if you want the driver to support those games officially. You can find the support article here on Microsoft's website.
  • Recent Achievements

    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
    • Dedicated
      tuben earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      208
    3. 3
      PsYcHoKiLLa
      98
    4. 4
      Michael Scrip
      89
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!