Recommended Posts

  Quote
B/W : Server 2003 is Domain Controller!
Actually, you can use Run As to perferm administrative tasks or the other way around. Describe what sort of tasks that you need to do so we can help you figure out the way around this :)
  Quote
Aye, I'll shut up now.

I hear what you are saying and I'll just *wink* ;) in agreement with the server comment :rofl:

  Xahid said:
How to enable Fast User Switching in Windows Server 2003 ?

I want this feature to logged on without logging off Administrator!

B/W : Server 2003 is Domain Controller!

You really really can't - I read the assembler once to determine this (part of my job) - took about two full weeks. All necessary code for FUS is in 2k3 - it's just not enabled because of ONE bit in the registry - the bit that tells the OS to act as a server rather than a workstation. And it is neither legal nor possible to flip that bit. :rolleyes:

you can actually RDP to localhost and run concurrent sessions through a single terminal anyway.

btw, if you had read the post stuck to the top of the forum that reads 'READ THIS BEFORE POSTING', you'd see that 2k3 doesn't have fast user switching.

  incubusdaemon said:
btw, if you had read the post stuck to the top of the forum that reads 'READ THIS BEFORE POSTING', you'd see that 2k3 doesn't have fast user switching.

FUS in w2k3 - it's actually in there, but the Terminal Services (and winlogon.exe and a few more files as I remember it) actually checks if the OS runs as a server, and if so, it makes FUS unavailable, and other stuff available. And with good reason, because the Terminal Services have to behave quite differently to provide FUS.

you can enalbe Fast User Switching in Windows 2003 Server.

You'll need the Win2003 Optimizer Tool (free program) from http://www.sala.pri.ee/2k3optimize.htm

It's just an exe file, no need to install the program. Under "Other", you'll see "Enable Fast User Switching" feature. good luck.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • More Microsoft Account headaches: Office 2024 licensing bug finally gets detailed fix by Sayan Sen Microsoft often highlights the benefits of a Microsoft account (MSA) as it points out the unified access users get across devices and services like Windows, Office, OneDrive, and Xbox, which can help in synchronization of files and settings for convenience. That is also why it is a mandatory requirement during Windows 11 installs. However, there can be major problems too. For example, earlier this month, we reported on an incident wherein a Windows user was locked out of their Microsoft Account when Windows flagged their OneDrive upload activities, and apparently there was no way to recover their account. We discussed how, in such a case, users can lose all their data, especially if it's BitLocker encrypted, which is not all that unlikely on Windows 11 24H2. You can read the story in full in this article here. Meanwhile, on the topic of MSA, Microsoft has finally released a detailed step-by-step guide for fixing the Office 2024 licensing bug. The tech giant had already published an update earlier back in December last year. While that was supposed to fix the issue, the problem likely persisted for many users. For those who need a refresher, users whose Microsoft accounts held licenses for both Office 2024 and earlier editions like Office 2021. After upgrading to Office 2024, the MSA continued to display the older version. At the time, Microsoft only stated that installing the latest version of the Office 2024 app would fix the issue. This week, though, a detailed guide has been shared. The company writes: You can find the support article here on Microsoft's official website.
    • Hey Neowin folks, I’m struggling with my Samsung QLED Q80C smart TV’s Wi-Fi dropping randomly. It connects to my 5GHz network but loses signal every 20–30 minutes, interrupting streaming. Details: Device: Samsung QLED Q80C (2023 model), Tizen OS, firmware updated to latest (May 2025). Network: TP-Link Archer AX73 router, Wi-Fi 6, 5GHz band, WPA3 security. Environment: TV ~10 feet from router, no major interference (tested without microwave or cordless phones). Setup: Streaming Netflix, YouTube via built-in apps; issue persists across apps. Steps Tried: Restarted TV, router, and modem. Switched to 2.4GHz band—same issue, slower speed. Assigned static IP to TV in router settings. Reset TV network settings and reconnected. Checked router logs; no disconnect errors logged. Searched Neowin; found a 2024 thread on Wi-Fi issues but no TV-specific fixes. Expected: Stable Wi-Fi connection for uninterrupted streaming. Actual: Wi-Fi drops every 20–30 minutes, requiring manual reconnect. Has anyone faced Wi-Fi dropouts on Samsung QLED TVs or Tizen OS? Could it be a firmware bug or router setting? Any debug tips or workarounds? Thanks for any ideas!
    • I can see why you would need an AI browser
    • if you get your MSA locked and can't recover it, and if you are on win 11 24H2 that can do automatic encryption (on Home editions too), then the BitLocker key goes with that account.
  • Recent Achievements

    • Conversation Starter
      sophiaisabella32 earned a badge
      Conversation Starter
    • First Post
      Brett76 earned a badge
      First Post
    • One Year In
      78andyp earned a badge
      One Year In
    • One Month Later
      Cottonbud earned a badge
      One Month Later
    • One Month Later
      langat earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      594
    2. 2
      ATLien_0
      219
    3. 3
      Michael Scrip
      191
    4. 4
      +FloatingFatMan
      146
    5. 5
      Xenon
      135
  • Tell a friend

    Love Neowin? Tell a friend!