Paste what's on your clipboard thread


Recommended Posts

***************: what size shoe do you wear? still need to get you an X-mas present. :D

************* (Me): 11 1/2...12 maybe, get me the Rowley Slims.

***************: you know what they say about guys with big feet...;) sexy.

************* (Me): big socks?

***************: exactly.

************* (Me): heheh, awesome.

AIM conversation, quote of the f*cking week in my profile.

Forbidden

You don't have permission to access /uploads/Far_Up.MOV on this server. Likely, this is because the site which you are coming from:

https://www.neowin.net/forum/index.php?show...#entry585212312

is not one of the sites which is allowed to hotlink to the files stored on useruploads.mythica.org. To view a list of sites from which you can link to the files uploaded here, please visit this page.

--------------------------------------------------------------------------------

Apache/1.3.26 Server at useruploads.mythica.org Port 80

You asked

5:51 UTC 2004

BIOS-provided physical RAM map:

BIOS-e820: 0000000000000000 - 000000000009f000 (usable)

BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)

BIOS-e820: 0000000000100000 - 000000001ffc9000 (usable)

BIOS-e820: 000000001ffc9000 - 0000000020000000 (reserved)

BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)

BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)

511MB LOWMEM available.

On node 0 totalpages: 131017

  DMA zone: 4096 pages, LIFO batch:1

  Normal zone: 126921 pages, LIFO batch:16

  HighMem zone: 0 pages, LIFO batch:1

DMI 2.3 present.

ACPI: RSDP (v000 DELL                                  ) @ 0x000fdf00

ACPI: RSDT (v001 DELL    CPi R  0x27d30c0a ASL  0x00000061) @ 0x1fff0000

ACPI: FADT (v001 DELL    CPi R  0x27d30c0a ASL  0x00000061) @ 0x1fff0400

ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000

ACPI: PM-Timer IO Port: 0x808

Built 1 zonelists

Kernel command line: root=/dev/hdc4 ro quiet splash vga=791

No local APIC present or hardware disabled

Initializing CPU#0

PID hash table entries: 2048 (order 11: 16384 bytes)

Detected 2392.400 MHz processor.

Using pmtmr for high-res timesource

Console: colour dummy device 80x25

Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Memory: 511692k/524068k available (1328k kernel code, 11580k reserved, 727k data, 204k init, 0k highmem)

Checking if this processor honours the WP bit even in supervisor mode... Ok.

Calibrating delay loop... 4734.97 BogoMIPS

Security Scaffold v1.0.0 initialized

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000

CPU: After vendor identify, caps:  bfebf9ff 00000000 00000000 00000000

CPU: Trace cache: 12K uops, L1 D cache: 8K

CPU: L2 cache: 512K

CPU: After all inits, caps:        bfebf9ff 00000000 00000000 00000080

CPU: Intel? Pentium? 4 CPU 2.40GHz stepping 07

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Checking 'hlt' instruction... OK.

Checking for popad bug... OK.

ACPI: IRQ9 SCI: Edge set to Level Trigger.

checking if image is initramfs...it isn't (ungzip failed); looks like an initrd

Freeing initrd memory: 4160k freed

NET: Registered protocol family 16

EISA bus registered

PCI: PCI BIOS revision 2.10 entry at 0xfcfae, last bus=2

PCI: Using configuration type 1

mtrr: v2.0 (20020519)

ACPI: Subsystem revision 20040816

ACPI: Interpreter enabled

ACPI: Using PIC for interrupt routing

ACPI: PCI Root Bridge [PCI0] (00:00)

PCI: Probing PCI hardware (bus 00)

PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1

PCI: Transparent bridge - 0000:00:1e.0

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)

ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11

ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)

ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)

ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)

ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]

Linux Plug and Play Support v0.97 ? Adam Belay

PnPBIOS: Scanning system for PnP BIOS support...

PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0

PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40

pnp: 00:01: ioport range 0x800-0x85f could not be reserved

pnp: 00:01: ioport range 0x860-0x87f has been reserved

pnp: 00:01: ioport range 0x880-0x8bf has been reserved

pnp: 00:01: ioport range 0x8c0-0x8ff has been reserved

pnp: 00:01: ioport range 0xf400-0xf4fe has been reserved

PnPBIOS: 11 nodes reported by PnP BIOS; 11 recorded by driver

PCI: Using ACPI for IRQ routing

ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11

ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11

ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11

ACPI: PCI interrupt 0000:00:1d.1 -> GSI 11 (level, low) -> IRQ 11

ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11

ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11

ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11

ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11

ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11

ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7

ACPI: PCI interrupt 0000:00:1f.5 -> GSI 7 (level, low) -> IRQ 7

ACPI: PCI interrupt 0000:00:1f.6 -> GSI 7 (level, low) -> IRQ 7

ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11

ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11

ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 7 (level, low) -> IRQ 7

ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11

ACPI: PCI interrupt 0000:02:04.1[A] -> GSI 11 (level, low) -> IRQ 11

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

devfs: 2004-01-31 Richard Gooch ([email protected])

devfs: boot_options: 0x0

Initializing Cryptographic API

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled

ACPI: PCI interrupt 0000:00:1f.6 -> GSI 7 (level, low) -> IRQ 7

RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize

i8042.c: Warning: Keylock active.

serio: i8042 AUX port at 0x60,0x64 irq 12

serio: i8042 KBD port at 0x60,0x64 irq 1

input: AT Translated Set 2 keyboard on isa0060/serio0

EISA: Probing bus 0 at eisa0

EISA: Detected 0 cards.

NET: Registered protocol family 2

IP: routing cache hash table of 4096 buckets, 32Kbytes

TCP: Hash tables configured (established 32768 bind 65536)

NET: Registered protocol family 8

NET: Registered protocol family 20

ACPI: (supports S0 S1 S3 S4 S4bios S5)

ACPI wakeup devices:

LID PBTN PCI0 USB0 USB1 USB2 USB3 MODM PCIE

RAMDISK: cramfs filesystem found at block 0

RAMDISK: Loading 4160 blocks [1 disk] into ram disk...

VFS: Mounted root (cramfs filesystem) readonly.

Freeing unused kernel memory: 204k freed

vesafb: framebuffer at 0xe8000000, mapped to 0xe0823000, size 3072k

vesafb: mode is 1024x768x16, linelength=2048, pages=20

vesafb: protected mode interface info at c000:541f

vesafb: scrolling: redraw

vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0

fb0: VESA VGA frame buffer device

Console: switching to colour frame buffer device 128x48

ACPI: Processor [CPU0] (supports C1, 8 throttling states)

ACPI: Thermal Zone [THM] (30 C)

NET: Registered protocol family 1

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

ICH4: IDE controller at PCI slot 0000:00:1f.1

PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)

ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11

ICH4: chipset revision 2

ICH4: not 100% native mode: will probe irqs later

    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio

    ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio

hda: MAT****A CD-RW/DVD-ROM UJDA740, ATAPI CD/DVD-ROM drive

Using anticipatory io scheduler

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

hdc: IC25N040ATCS05-0, ATA DISK drive

ide1 at 0x170-0x177,0x376 on irq 15

hdc: max request size: 128KiB

hdc: 78140160 sectors (40007 MB) w/7898KiB Cache, CHS=65535/16/63, UDMA(100)

/dev/ide/host0/bus1/target0/lun0: p1 p2 < p5 > p3 p4

kjournald starting.  Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

Adding 500076k swap on /dev/hdc3.  Priority:-1 extents:1

EXT3 FS on hdc4, internal journal

Synaptics Touchpad, model: 1

Firmware: 5.9

Sensor: 37

new absolute packet format

Touchpad has extended capability bits

-> multifinger detection

-> palm detection

input: SynPS/2 Synaptics TouchPad on isa0060/serio1

mice: PS/2 mouse device common for all mice

ts: Compaq touchscreen protocol output

hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache

Uniform CD-ROM driver Revision: 3.20

lp: driver loaded but no devices found

Capability LSM initialized

device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [email protected]

md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27

cdrom: open failed.

Linux Kernel Card Services

  options:  [pci] [cardbus] [pm]

PCI: Enabling device 0000:02:04.0 (0000 -> 0002)

ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11

Yenta: CardBus bridge found at 0000:02:04.0 [1028:0149]

Yenta: ISA IRQ mask 0x0478, PCI irq 11

Socket status: 30000020

b44.c:v0.94 (May 4, 2004)

ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 7 (level, low) -> IRQ 7

eth0: Broadcom 4400 10/100BaseT Ethernet 00:0b:db:9a:36:70

ath_hal: module license 'Proprietary' taints kernel.

ath_hal: 0.9.11.6

wlan: 0.8.4.2 (EXPERIMENTAL)

ath_pci: no version for "ieee80211_ioctl_siwrate" found: kernel tainted.

ath_pci: 0.9.4.0 (EXPERIMENTAL)

PCI: Enabling device 0000:03:00.0 (0000 -> 0002)

ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 11 (level, low) -> IRQ 11

ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps

ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps

ath0: mac 5.9 phy 4.3 5ghz radio 4.6

ath0: 802.11 address: 00:0f:3d:52:a4:37

ath0: Use hw queue 0 for WME_AC_BE traffic

ath0: Use hw queue 1 for WME_AC_BK traffic

ath0: Use hw queue 2 for WME_AC_VI traffic

ath0: Use hw queue 3 for WME_AC_VO traffic

ath0: Atheros 5212: mem=0x20800000, irq=11

usbcore: registered new driver usbfs

usbcore: registered new driver hub

USB Universal Host Controller Interface driver v2.2

ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11

uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1

PCI: Setting latency timer of device 0000:00:1d.0 to 64

uhci_hcd 0000:00:1d.0: irq 11, io base 0000bf80

uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

ACPI: PCI interrupt 0000:00:1d.1 -> GSI 11 (level, low) -> IRQ 11

uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2

PCI: Setting latency timer of device 0000:00:1d.1 to 64

uhci_hcd 0000:00:1d.1: irq 11, io base 0000bf40

uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11

uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3

PCI: Setting latency timer of device 0000:00:1d.2 to 64

uhci_hcd 0000:00:1d.2: irq 11, io base 0000bf20

uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 2 ports detected

ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11

ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller

PCI: Setting latency timer of device 0000:00:1d.7 to 64

ehci_hcd 0000:00:1d.7: irq 11, pci mem e0bd4c00

ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4

PCI: cache line size of 128 is not supported by device 0000:00:1d.7

ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10

hub 4-0:1.0: USB hub found

hub 4-0:1.0: 6 ports detected

usb 2-1: new low speed USB device using address 2

usbcore: registered new driver hiddev

input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1

input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1

usbcore: registered new driver usbhid

drivers/usb/input/hid-core.c: v2.0:USB HID core driver

input: PC Speaker

Real Time Clock Driver v1.12

Linux agpgart interface v0.100 ? Dave Jones

agpgart: Detected an Intel 845G Chipset.

agpgart: Maximum main memory to use for agp memory: 439M

agpgart: AGP aperture is 128M @ 0xe0000000

cpci_hotplug: CompactPCI Hot Plug Core version: 0.2

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5

shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5

pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5

pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5

shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5

shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5

pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5

pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5

hw_random hardware driver 1.0.0 loaded

ACPI: PCI interrupt 0000:00:1f.5 -> GSI 7 (level, low) -> IRQ 7

PCI: Setting latency timer of device 0000:00:1f.5 to 64

intel8x0_measure_ac97_clock: measured 49495 usecs

intel8x0: clocking to 48000

ACPI: PCI interrupt 0000:00:1f.6 -> GSI 7 (level, low) -> IRQ 7

PCI: Setting latency timer of device 0000:00:1f.6 to 64

MC'97 1 converters and GPIO not ready (0xff00)

ieee1394: Initialized config rom entry `ip1394'

ohci1394: $Rev: 1223 $ Ben Collins <[email protected]>

ACPI: PCI interrupt 0000:02:04.1[A] -> GSI 11 (level, low) -> IRQ 11

ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[faffd800-faffdfff]  Max Packet=[2048]

ieee1394: Host added: ID:BUS[0-00:1023]  GUID[394fc000174f0861]

NET: Registered protocol family 10

Disabled Privacy Extensions on device c02c9fa0(lo)

IPv6 over IPv4 tunneling driver

ACPI: Battery Slot [bAT0] (battery present)

ACPI: AC Adapter [AC] (on-line)

ACPI: Lid Switch [LID]

ACPI: Power Button (CM) [PBTN]

ACPI: Sleep Button (CM) [sBTN]

apm: BIOS not found.

ath0: no IPv6 routers present

cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7

cs: IO port probe 0x0800-0x08ff: clean.

cs: IO port probe 0x0c00-0x0cff: clean.

cs: IO port probe 0x0a00-0x0aff: clean.

mtrr: 0xe8000000,0x2000000 overlaps existing 0xe8000000,0x200000

[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]

mtrr: 0xe8000000,0x2000000 overlaps existing 0xe8000000,0x200000

agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.

agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode

agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

drivers/usb/input/hid-input.c: event field not found

drivers/usb/input/hid-input.c: event field not found

mtrr: 0xe8000000,0x2000000 overlaps existing 0xe8000000,0x200000

mtrr: 0xe8000000,0x2000000 overlaps existing 0xe8000000,0x200000

agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.

agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode

agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

mtrr: 0xe8000000,0x2000000 overlaps existing 0xe8000000,0x200000

mtrr: 0xe8000000,0x2000000 overlaps existing 0xe8000000,0x200000

agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.

agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode

agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

mtrr: 0xe8000000,0x2000000 overlaps existing 0xe8000000,0x200000

mtrr: 0xe8000000,0x2000000 overlaps existing 0xe8000000,0x200000

agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.

agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode

agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

This place apparently is a gold mine for CD Keys :laugh:

Anyway, mine: http://z500afaceplate.young-america.com/entryform1.asp

I am getting a Z500 tomorrow (buy one get one free, 2 for $80) at Cingular so I am gonna get some free faceplates too :p

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Good. I hope more people sue them for focusing on this worthless junk.
    • How about fire the guy who approved all the bad decisions? The guy who bought these studios in the first place? Oh wait, Satya is safe with his billions while the workers pay the price.
    • This had nothing to do with games. This is all about management wanting to squeeze as much money from Xbox to keep Microsoft's AI ambitions afloat. Someone has to make money to burn on AI.
    • GeekBook X16 Pro Intel Core Ultra 9 thin and light laptop gets a 17% discount by Steven Parker GEEKOM is back with a 17% discount on its top-of-the-range X16 Pro laptop. You may remember that we reviewed the X14 Pro back in February, which marked GEEKOM's debut into the ultrathin laptop segment. You can view the full specs below. GEEKOM X16 Pro Model NX14CM Dimensions 322.58 × 213.36 × 5.8 mm (12.7"L x 8.4"W x 0.23"T) Weight 997 g / 2.2 lbs Material Unibody Magnesium Alloy CPU Intel Ultra 5 125H (14C/18T, 24MB L3, 2.3-5.1 GHz, TDP 20W) Intel Ultra 9 185H (16C/22T, 24MB L3, 2.3-4.5 GHz, TDP 35W) Graphics Intel Arc graphics 8 Xe-cores @ 2350MHz 1024 shading units/stream processors (128 CUs), 8 Raytracing Cores, 64 texture mapping units, and 32 ROPs NPU Intel AI Boost, 11 TOPS / Up to 33 TOPS (CPU+NPU+GPU) Memory 32GB Dual-channel LPDDR5x 7467 MT/s Micron SODIMM Storage 1 x M.2 2280 PCIe Gen 4x4, Wodposit 1TB, 2 TB Display 16.0" IPS LCD, 2560 × 1600 (16:10) 100% sRGB, 120Hz Refresh Rate Camera 2MP 1080P 1 × Light sensor in camera module 1 × LED indicator in the camera module Windows Hello Support: No Mic 2 x Digital Mics integrated in the camera module Speakers 2 x 3813 (4Ω×2W) built in body Audio Codec: ALC269QN-VC3-GR Certificate: DTS: X Ultra Operating System Windows 11 Pro 25H2 Bluetooth Bluetooth 5.4 Wireless LAN MediaTek MT7922 M.2 Wi-Fi 6E LAN card Left I/O ports 1 x HDMI 2.0 2 x USB4 (40 Gbps) Right I/O ports 1 x USB 3.2 Gen 1 Type-A (5 Gbps) 1 x 3.5 mm Audio jack 1 x Camera Privacy Shutter Keyboard 78Key 1.2±0.2mm / Height 3.5±0.2mm (with backlight) White LED light in Caps Lock and Fn key Language: Default US Touch Pad Dimension: 120 x 71mm Material: Mylar Position: Middle Interface: I2C, Dualpoint button Dock Input port: 1 x Type-C 2 x USB 3.0, 1 x RJ45 1 x PD 1 x HDMI (Bio) Security Fingerprint sensor (in the power button) SD Card slot No Kensington Lock No Battery 77Wh (Input 20V, 3.25A) Power 65W PD GaN Fast Charge, USB-C to USB-C Warranty 2 years (Early Bird 1+1 Years) Deal price $1119.67 The X16 Pro is powered by the Intel Ultra 9 185H, which was released in Q4 2023 and is a 14th Gen Meteor Lake CPU designed for laptop/mobile using the Intel 4 architecture based on a 7nm process. The Ultra 9 185H features 16 cores and 22 threads running at up to 5.1 GHz. It also includes a dedicated NPU utilizing Intel AI Boost at 11 TOPS. On the graphics front, the 185H includes the still fairly capable ARC Graphics (not to be confused with the newer ARC 140T) integrated GPU with a max GPU frequency of 2350 MHz across 8 Xe-cores. It has been said that the iGPU is equivalent to the NVIDIA GeForce 3050 and GTX 1650 in gaming and synthetic benchmarks. Other highlights include an AMOLED display, LPDDR5x memory at 7467 MT/s, WiFi 6E, Bluetooth 5.4, and a fingerprint sensor built into the power button. AI PC? Although the Intel Core Ultra 9 185H includes a dedicated NPU, it's only 11 TOPS; therefore, it does not qualify as a Copilot+ PC. However, it can reach up to 33 TOPS with a combination of NPU, CPU, and GPU. As I said, although we only reviewed the X14 Pro, the unboxing is the same for the X16 Pro, which I noted in my review. The packaging is quite a nice experience. The outer box houses the X16 Pro box with a small compartment that contains the 5-in-1 Dock ($40 value), which appears to be an "Early Bird" inclusion. Upon removing the box cover, the X16 Pro is revealed sitting in a cardboard compartment with two small booklets of documentation. To the left of the X16 Pro are two cardboard compartments containing the 65W charger and Type-C USB cable. What’s In The Box 1 x GEEKOM X16 Pro Ultra-thin Laptop 1 x Type-C to Type-C cable 1.8M 1 x 65W GaN PD Fast Charger 1 x Warranty Card 1 x Thank You Card 1 x User Guide All products sold by GEEKOM receive a 3-year free Warranty from the date you receive the product. If needed, you can RMA or return locally relative to your region (the U.S. has a U.S. warehouse, mainland E.U. has a German warehouse). GEEKOM X16 Pro at GEEKOM U.S. for $1,119.67 was $1,349 (17% off) Use coupon code NWGBX1617 when checking out. This flash deal expires on July 2. Huge Summer Sale As a reminder, yesterday GEEKOM kicked off their Huge Summer Sale, in which there are deep discounts on a range of other GEEKOM products. From June 15 to June 30, the GEEKOM Official Store will be running its Summer Sale, with discounts starting from 15% off across the entire lineup, up to 50%! This is their biggest promotion of the year so far, offering pricing that is even lower than select Prime Day deals. You can check out the discounts at the dedicated Summer Sale landing pages below. GEEKOM U.S. Summer Sale GEEKOM U.K. Summer Sale While the Summer Sale ends on June 30, this deal will remain active until July 2.
    • We are reached to the point that apple looks affordable and better choice than anything else, in what dystopia are we living in....
  • Recent Achievements

    • One Year In
      Console General earned a badge
      One Year In
    • One Year In
      Twozo Technologies earned a badge
      One Year In
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • Veteran
      branfont went up a rank
      Veteran
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Steven P.
      89
    5. 5
      Nick H.
      71
  • Tell a friend

    Love Neowin? Tell a friend!