• 0

Issues With Nero


Question

ok I searched the forums for an answer for this, but couldn't find it so if it is there sorry.

Now here is my issue. Every timie i start Nero Burning Rom 6 my computer restarts. ok i uninstalled the program then reinstalled it, and the same thing happened. then i uninstalled it then removed anything related to it from the registry. the reinstalled it and the same thing. Damn Reboot!!!! if any of you have any ideas i would really appreciate it. i am really wanting to slipstream sp2 into an xp install disc but i need nero to work first.

Regards,

iBAWLS

Link to comment
https://www.neowin.net/forum/topic/201972-issues-with-nero/
Share on other sites

24 answers to this question

Recommended Posts

  • 0

It sounds like you're getting a BSOD on running Nero 6.

You could try disabling the Automatically Restart option and then digging up on whatever information is presented by the BSOD. Or alternatively, go into Event Viewer and take a look at what exactly is causing these restarts.

  • 0

MY ASPI drivers are the latest available and i have tried alternatives, as there are many out there. i have uninstall everything that that does packet writing as well. and i get the same thing.

i haven't gone back to 5.5 cause i am a little hesitant because i paid a lot for this nero 6 ultra edition. i would like to figure out this issue cause if not that many people are having issues with nero 6 it is obiously a working program. i guess i am just frustrated

thanks

iBAWLS.

  • 0
MY ASPI drivers are the latest available and i have tried alternatives, as there are many out there. i have uninstall everything that that does packet writing as well. and i get the same thing.

i haven't gone back to 5.5 cause i am a little hesitant because i paid a lot for this nero 6 ultra edition. i would like to figure out this issue cause if not that many people are having issues with nero 6 it is obiously a working program. i guess i am just frustrated

thanks

iBAWLS.

I don't blame you for feeling bad. I sure did, but dropping back to v5 was the only thing I could figure out to do. I was using the DEMO 6.x and have tested each one as it has been updated. 5.5 is the only one that is stable enough for me.

Good luck.

  • 0

Hello,

i'm sorry but i can't solve your problem... but maybe you feel happy when i tell you that i have the exact same problem. Since i have my pc i van not run Nero and this is at the moemtn about one year!

Maybe our specs are the same? I've got the following system:

CREATIVE SB Audigy Bulk - LITE-ON DVD 16/48x IDE Tray Retail - MAXTOR 2x 120GB 8MB SATA (7200/150) 6Y120M0 - 2x TWINMOS DDR 512MB 400Mhz PC3200 - SONY Internal DRU-510A +/- DVD-R/RW Writer Retail - SAPPHIRE Radeon 9600 PRO 128Mb DDR - ABIT IS7 (Intel 865PE, P4 478 800FSB, SATA, 4DDR Dual Channel PC3200, 5PCI, 6 channel SOUND, LAN, Firewire) - INTEL PIV 2800 512KB Socket 478 800FSB Boxed with cooler - ANTEC Lanboy-EC Gamer Case 350W PSU - Windows XP pro

I really hope one of us can solve it so he can help the other!

Greetz,

WaCo

  • 0

well unfortunately we have different systems, try emailing nero, i have been trying to work with them, but it is slow going.

i have a [email protected] P4northwood800 on an Asus P4C800-e Deluxe with is the 875 chipset. i have 1GB of PC4000 corsair twinx platnum. ATI 9800 pro. Audigy 2z. 2 10,000rpm raptos in a raid 0 configuration, and another WD120GB HDD. tdk DVD+/_ r/rw and tdk 52x cdr/rw.

i hope you find a solution as well.

iBAWLS

  • 0
well unfortunately we have different systems, try emailing nero, i have been trying to work with them, but it is slow going.

i have a [email protected] P4northwood800 on an Asus P4C800-e Deluxe with is the 875 chipset. i have 1GB of PC4000 corsair twinx platnum. ATI 9800 pro. Audigy 2z. 2 10,000rpm raptos in a raid 0 configuration, and another WD120GB HDD. tdk DVD+/_ r/rw and tdk 52x cdr/rw.

i hope you find a solution as well.

iBAWLS

Have you tried stepping down to 5.5?

  • 0
ok so updating my chipset drives didn't help, but the solution that kirklander suggest did.

going back to 5.5. It will be a temp solution untill nero corrects this for me or gives my money back.

iBAWLS

So 5.5 does the job without problem for you? If so, at least you have a working solution... (Y)

  • 0
Hello,

i'm sorry but i can't solve your problem... but maybe you feel happy when i tell you that i have the exact same problem. Since i have my pc i van not run Nero and this is at the moemtn about one year!

Maybe our specs are the same? I've got the following system:

CREATIVE SB Audigy Bulk - LITE-ON DVD 16/48x IDE Tray Retail - MAXTOR 2x 120GB 8MB SATA (7200/150) 6Y120M0 - 2x TWINMOS DDR 512MB 400Mhz PC3200 - SONY Internal DRU-510A +/- DVD-R/RW Writer Retail - SAPPHIRE Radeon 9600 PRO 128Mb DDR - ABIT IS7 (Intel 865PE, P4 478 800FSB, SATA, 4DDR Dual Channel PC3200, 5PCI, 6 channel SOUND, LAN, Firewire) - INTEL PIV 2800 512KB Socket 478 800FSB Boxed with cooler - ANTEC Lanboy-EC Gamer Case 350W PSU - Windows XP pro

I really hope one of us can solve it so he can help the other!

Greetz,

WaCo

i have the same reboot problem, and i am looking for a solution

My soecs are very similare to yours:

Audigy II (same as u)

Pioneer 107D DVD+-RW

2x TWINMOS DDR 512MB 400Mhz PC3200 (same as u)

ASUS p4p800 865PE (same as u)

3ghz p4

I have a RAID 0 Array which may be causing a problem??

i really wanna fix this as i cant find any good alternatives to nero :cry:

  • 0

for all those following this thread i wanna say i fixed it. I basically went on a driver and software update spree.

Updated Intel application accelerator for raid

updated intel chipset software

Flashed BIOS to Asus 1016

Updated nero to the latest SP2 compatible one

now it works :D (well im burning a dvd now and it didnt reboot when i hit 'burn')

  • 0

Snitch I am glad you found a solution, i followed that same procedure for my pc by updateing the drivers and firmware, to no avail. the only solutions that worked for me is to roll back to 5.5. but i thinkg mine is a different issue as my BSOD come at just trying to start burning rom 6, not when hitting the burn button, so i dont knowi am still trying to work for a solution, and i will post one if i find one.

Regards,

iBAWLS

  • 0

I was having the exact same problem as you with nero 6. Nero 6 had worked fine before I reformated my computer, even with SP2. It stopped working after the reformat. Smartstart would work, but when actually starting a program within Smartstart, the computer would just restart. I turned off automatic restart and got the BSOD with BAD_POOL_HEADER 0x00000019 you mentioned. . .

After reading other posts on this forum, I did some experimenting with motherboard drivers. I have an Intel D875PBZ motherboard and 2 hard drives in RAID 0 configuration. I fixed the problem by installing Intel's Application Accelerator RAID Edition. I had this installed previously but forgot to reinstall it this time. This program can be found here:

http://downloadfinder.intel.com/scripts-df..._nm=iaar353*enu

The filename is iaar353_enu.exe. Only use this update with the Intel 875 chipset. Even if this isn't your motherboard, the problem definitely seems to be a conflict between Nero and either the motherboard, or RAID Hard drives. There may be a similar update for other motherboards. This solved my problem, hope it helps you or anyone else having the problem.

  • 0

I had the same exact problem as the rest of you. It seems to be a problem with Raid 0. I have two raptors in Raid 0. I did what mpotter said and its fixed now.

I would open up Nero StartSmart but as soon as I chose an option like Burn Image my computer would restart with a Bad_Pool_Header Blue Screen of Death. I had the latest version of intel's raid accelerator but It most likly wasn't working correctly because of how I had to install on my Raid 0 array. Because XP install would take the drivers off my floppy for my Raid, I had to install XP on a regular HD, then setup the raid with the accelerator program from intel so I could see the Raid 0 array in windows, I then had to use Norton Ghost to make to copy my entire C: drive operating system to the formatted raid 0 array. I then used partition magic to switch the raid 0 array Drive letter to C:. On reboot it booted from the Array and I then formatted the regular hard drive as extra storage space. I have a feeling that some time in that whole process something corrupted in the Raid Accelerator Program, and it just needed to be reinstalled.

My Problem is fixed, thank you mpotter.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • "Samsung is shutting down yet another app used by millions" I will fix the clickbait title for you, free-of-charge: "Samsung shutting down it's Max VPN app"
    • Microsoft brings Planner Agent to all Microsoft 365 Copilot users by Ivan Jenic Image: Microsoft Microsoft has announced that Planner Agent in Microsoft 365 Copilot is now generally available to all users with a Microsoft 365 Copilot license. Planner Agent is the latest addition in the string of AI features that Microsoft is implementing across virtually all of its products. The agent lets you manage tasks through natural language prompts directly inside Microsoft 365 Copilot. You can create and update tasks, check priorities, and get insights about current entries without leaving the chat interface. The general availability release comes with a handful of new additions on top of what was available during the initial rollout. A new plan picker lets you search and filter your plans by name, then update task names, statuses, due dates, or priorities through the agent. There's also a goals bucket now, which lets you group tasks under specific goals. This builds on the Goals view, a feature that was introduced as part of the broader Planner refresh that rolled out earlier. Image: Microsoft | Planner Agent in Microsoft 365 Copilot All AI-generated plans and tasks are created in draft mode by default, so you can review and approve changes before anything goes through. This is actually a thoughtful safety feature, because trusting AI to handle all your tasks without a human in the loop is usually a recipe for disaster. Having tasks initially saved as drafts is the best possible middle ground. Microsoft also says that not all tasks are executed equally. Simple tasks get processed quickly, while more complex ones, like building a plan from a Word, Excel, or PowerPoint file, are handed to a more capable model. Microsoft says this approach delivers the best performance, but it could also help with usage management, as you won't have to waste tokens on performing simple tasks. Planner Agent is available now across Teams, Loop, SharePoint, and other Microsoft 365 apps for anyone on a Microsoft 365 Copilot subscription.
    • To be clear I'm anti trump, the bigger point is why review this game at all?
    • Trillion dollar Microsoft has to reduce spending by hurting more people. Good job Microsoft. Good Job Asha.
    • That's a shame. The big Xbox reset when Phil and Sarah left and then Asha came on and brought a new team of executives, and all the layoffs last year and saying that the ABK merger wouldn't result in redundancies I am surprised they are calling for yet another reset and yet more layoffs.
  • Recent Achievements

    • First Post
      Cosminus earned a badge
      First Post
    • One Year In
      ThatGuyOnline earned a badge
      One Year In
    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      194
    3. 3
      PsYcHoKiLLa
      125
    4. 4
      Steven P.
      87
    5. 5
      neufuse
      73
  • Tell a friend

    Love Neowin? Tell a friend!