DirectX not installing...


Recommended Posts

I am running Windows XP Pro and have DirectX 9.0b installed and I've just got the Sims 2 and I need 9.0c.

Whenever I run the sims 2 (and the new bodyshop that came with it) the following message appears:

Failed to initialize Direct3D. Please make sure DirectX 9.0c has been installed on this system. The application will now terminate.

I've TRIED to install 9.0c and according to my computer it has installed, and that it's ready for use but when i go to dxdiag it says I'm still running 9.0b

I am using a Raedon 7000 series for a display card and had downloaded the latest version from the website - http://www.ati.com

what am I doing wrong?!

Link to comment
https://www.neowin.net/forum/topic/219839-directx-not-installing/
Share on other sites

  ThyLaSlain said:
how can i tell if i'm running service pack 2?

well, i tried installing it earlier on (SP2) and it said that it could not install due to the fact that service pack 2 is not letting it.

so i'm guessing i have sp2 already.

START > RUN > type winver

That'll tell you if you're have SP2.

Here is the websetup of DirectX 9.0c the other guy spoke of:

http://download.microsoft.com/download/8/0.../dxwebsetup.exe

  ThyLaSlain said:
GAH!

ok, i AM using Service Pack 2

and i STILL don't have 9.0c

what's up with THAT?!

Hmm...i think you have to be. SP2 installs DX9.0c

START > RUN > dxdiag

Try reinstalling your video card drivers too.

http://www2.ati.com/drivers/wxp-w2k-cataly...25a-017633c.exe

OH GOD

OH GOD

ok. i clicked BOTH links (heh) downloaded the web thing TWICE

and STILL, i go to dxdiag and it says:

DirectX Version: 9.0...

wait for it...

B!!!!!

WHY

WHAT HAVE I DONE TO DESERVE THIS!

it SAYS:

tHE COMPONENTS INSTALLED ARE NOW READY FOR USE

but i go check dxdiag and it says 9.0B and not C.

  ThyLaSlain said:
OH GOD

OH GOD

ok. i clicked BOTH links (heh) downloaded the web thing TWICE

and STILL, i go to dxdiag and it says:

DirectX Version: 9.0...

wait for it...

B!!!!!

WHY

WHAT HAVE I DONE TO DESERVE THIS

Ok, after you download that, you have to run it. It will take a couple minutes to install.

  KZWings said:
Ok, after you download that, you have to run it. It will take a couple minutes to install.

well DUH i ran it. lol.

it didn't take a couple minutes at all!

it just skipped the whole loading thing an just told me that the installed components were ready for use. it's INCREDIBLY BAFFLING

  King Mustard said:
Try uninstalling DirectX then re-installing.

http://www.softpedia.com/public/cat/14/4/14-4-40.shtml

geh. I did, i uninstalled, now i don't have directx at ALL.

This is what my installing thing looks like, below:

as you can see, it completely skips the bit where it's supposed to actually LOAD the stuff onto my comp.

[PLEASE NOTE: IT IS A GIF FILE, IT'S ON LOOP]

post-17-1095686789.gif

Hi,

If you re-install windows xp sp2 again (it'll only take a couple of minutes) you will have DirectX 9.0c again. The reason I beleive this is happening to you is that you used the DirectX 9.0c beta before sp2 came out. I had the same problem and it has fixed mine however sims 2 will still not recognise the fact that DirectX 9.0c has been installed.

I tried all of the above troubleshooters with the same results as yourself.

Damn those betas can really cause headaches but hey we all like the new stuff don't we? :D

Resolved! I now have finished fixing this problem! Sims 2 works too!

Remove Sims 2 first then remove SP2. Apply new DirectX 9.0c then add SP2 and then run the setup for Sims 2 again.

I know it's a long winded way of solving the problem but it definitely works.

I am now able to play this game without the DirectX problem occuring anymore.

:D

  Bushy said:
Resolved! I now have finished fixing this problem! Sims 2 works too!

Remove Sims 2 first then remove SP2. Apply new DirectX 9.0c then add SP2 and then run the setup for Sims 2 again.

I know it's a long winded way of solving the problem but it definitely works.

I am now able to play this game without the DirectX problem occuring anymore.

:D

And your opinion of the game? :D

  ThyLaSlain said:
how can i tell if i'm running service pack 2?

well, i tried installing it earlier on (SP2) and it said that it could not install due to the fact that service pack 2 is not letting it.

so i'm guessing i have sp2 already.

that would be because DX9.0c is already installed automaticlly with windows xp sp2 to tell if you have it look in system properties in the general tab it will say "windows xp [home/pro] version 2002 service pack 2"

  Bushy said:
Resolved! I now have finished fixing this problem! Sims 2 works too!

Remove Sims 2 first then remove SP2. Apply new DirectX 9.0c then add SP2 and then run the setup for Sims 2 again.

I know it's a long winded way of solving the problem but it definitely works.

I am now able to play this game without the DirectX problem occuring anymore.

:D

why oh why would you need to remove SP2? DirectX 9.0c is INCLUDED with windows xp sp2 by default, you have no choice in picking if you want it installed or not, it will install during the installation of SP2

You know what? Maybe M$ won't allow bootleg copies of XP to install/update directx anymore. I have the same problem, I want to play the sims 2, (why is everyone upgrading to C? THE SIMS 2) .. I just reformatted and re-installed today. Noooooooooooope. Maybe I'll just have to go back to SP1 or get the final release of SP2.

[GLOW=blue]Listen every body.............my friend was having the same problem in his pc:

P 4 2.8GHz

256 DDR (2*128)

RADEON 9200====>128

Intel motherboar=>845 familly

built in sound

i tried every what in this page.

THE SOLUTION: Remove one RAM of yours, then install any version you want of DIRECTX, then put the RAM you move again.

i dont know the reason untill now but it works and i am sure that it will with you.

This is the probably most asked question about Sims 2.

For every occasion I've seen of this problem it is easily fixed by removing any forced refresh rate programes. This also means setting their values back to default. So if you have used like RefreshForce and deletd it, download it again, put all the values to default again, and run Sims 2. Forced refresh rates causes that error message.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I've got a basic black and white laser printer that's connected via USB and doesn't do wifi etc. I think I'm going to be just fine.
    • Edge 138 is out with AI-powered history search and other changes by Taras Buria Microsoft has released Edge 138, the latest major update for the browser. Version 138.0.3351.55 introduces some interesting changes and new features, such as AI-powered history search. There are also several bug fixes and security patches. For regular users, the biggest and most important change in Edge 138 is AI-powered history search. This feature allows you to find sites in your history using synonyms, phrases, or misspelled words. Microsoft uses an on-device model, which does not send your data anywhere. Note that this feature is rolling out gradually, which means it might take a few days or weeks to show up on your system. Another useful change is new performance notifications. Performance and Extensions Detector notifications may appear in the main menu when the browser detects performance dips to help users learn about available performance-optimization tools. Autofill settings received a new consent toggle, which allows Microsoft to improve the autofill capabilities by collecting field names as you browse. This only applies to field names, such as "First Name, "Email," etc. It does not send the data you enter or autofill to Microsoft. Other changes include the following: Use the Primary work profile as the default profile to open external links. With this feature, for Windows, Edge checks if the Primary Work Profile exists and makes it the default profile for opening external links if available. Microsoft 365 Copilot Chat Summarization in Microsoft Edge Context Menu. This feature helps users quickly unpack and ask questions about their open page. Copilot on the Microsoft Edge New Tab Page (NTP). Users may see suggested work and productivity-related Copilot prompts in their search box on the NTP page. Adding support for viewing Sensitivity labels applied to a Microsoft Information Protection (MIP) Protected PDF. Enterprise customers can view sensitivity labels applied to MIP protected PDF to be well informed of the data classification to enable them to handle such sensitive documents. And here is what was fixed: Fixed an issue that caused WebDriver automation to fail in Microsoft Edge versions 133 and later. Fixed an issue where re-enabled textarea elements remained non-editable. This issue affected activating a role assignment in Privileged Identity Management. Finally, Edge 138 patches six security vulnerabilities, three of which were Microsoft Edge-specific, and the remaining three originated from Chromium. You can find details about those fixes here. The next Microsoft Edge update, version 139, is expected in the week of August 7, 2025.
    • “Never trust any statistics that you didn't forge yourself.”
    • Per the linked article: "Based on testing performed by Microsoft in December 2024 using Geekbench 6 Multi-core score comparing a selection of Windows 10 PCs with Intel Core 6th, 8th, and 10th generation processors and Windows 11 PCs with Intel Core 12th and 13th generation processors." I get that this is just advertising and all, but damn, I can smell the BS all the way over here. How about benchmarking 10 vs 11 on that same 13th gen processor? Apples and oranges make a lovely fruit salad but a terrible comparison. I mean shoot, my Windows 10 PC running a Ryzen 7 is faster than a Core2Duo running Windows 7, so Windows 10 is clearly faster. 🙄
    • KB5060829 installed in a test VM and the option isn't even there under "Taskbar behaviours". Installed it on a second VM, same. Installed it on metal... same. Typical quality of Nadella's Microsoft. If i doesn't shrink the taskbar vertical height down as @seeprime is implying, what's the point?
  • Recent Achievements

    • Week One Done
      suprememobiles earned a badge
      Week One Done
    • Week One Done
      Marites earned a badge
      Week One Done
    • One Year In
      runge100 earned a badge
      One Year In
    • One Month Later
      runge100 earned a badge
      One Month Later
    • One Month Later
      jfam earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      562
    2. 2
      +FloatingFatMan
      177
    3. 3
      ATLien_0
      167
    4. 4
      Michael Scrip
      125
    5. 5
      Xenon
      121
  • Tell a friend

    Love Neowin? Tell a friend!