How do you launch your Apps?


Recommended Posts

Just out of curiosity i created this thread, and also to share some wealth for some people who maybe aren't aware of the different ways you could launch Apps. Since i found QuickSilver, i've come to rely on it, when its not running it feels like a part of Mac OS X is missing...

Anyhow, i am curious to see how everyone else gets to their apps? Do you -

Chuck all the Apps in the dock, and pick from them?

Throw the Apps folder in the dock and use the popup?

TigerLaunch?

QuickSilver?

LaunchBar?

If you feel compelled to answer, maybe suggest why you use the App or method you do, so the thread is useful to everyone.

I use QuickSilver, and it reminds me, to a degree of Spotlight in Tiger. OK so it's not really the same, but its really really nice to use. I can catalog my files (@ intervals) and then a quick Key command, bring up QuickSilver, and pop in some letters. The results can derive from a variety of apps and locations based on Plugins you install. For example, a Safari plugin allows you to no longer have to remember how you stored your bookmarks, you just hit ya Key Combo and pop in 'Neo' in which time it's grabbed all my bookmarks for this. It makes Bookmark management, almost a thing of the past! :D it's worth noting it seems to learn on the way you work. For example when i first started using it, Photoshop wouldn't be the top result via 'PS'. After navigating a few search results down, it improved its search rating with 'PS' and now its the top entry! :) It's got loads of potential. Personally i like the Address Book integration, Sherlock, iTunes... Worth a look mos definitely.

Quicksilver - http://quicksilver.blacktree.com/

Plugins - http://quicksilver.blacktree.com/plugins.php

i've attached a Screenshot. Quicksilver, and the list of search results. Excuse the picture of me wearing my G/F's Sunglasses! (This is data from Address Book! ;)) :p

One of the best parts to it, is its there when i need it, but when i don't you wouldn't even know it was running. Really non obtrusive! :)

post-60-1096411676.jpg

Edited by Steve
Link to comment
https://www.neowin.net/forum/topic/223693-how-do-you-launch-your-apps/
Share on other sites

I launch applications three different ways.

1. From Dock (Frequently used applications, like Firefox, iTunes, Mail, VLC and Terminal).

2. From LaunchBar (Most other applications).

3. From a Finder window.

Thanks for the QuickSilver info/link, sure gonna give it a test! :D

I launch most stuff from the dock and I have the applications folder in there too incase i need to grab something random. I also have the office folder in the dock...i didnt feel like having 5 different links (one for each of the office programs I use) so the folder works out well.

I might have to try quicksilver out though, looks cool :)

I use the dock for the mostly used applications (Camino, Mail, Adium, etc.) because they are almost always running, so they will be in my dock anyway.

For the rest I use QuickSilver, but it is so much more than a launcher, I also switch my iTunes music with it, I start Transmit with a bookmark, I open a new Camino windows with a bookmark. I love this program so much. QuickSilver is one of those things that just make the whole computing experience much more enjoyable.

If you don't use Quicksilver, you have no idea what you are missing out. I love it so much that I'd pay like $30 for it if it were not free. I launch everything with it, except Firefox, Mail, iCal which are already in my Dock. I don't like having too many apps in my Dock because I have very limited Dock space on my Powerbook 12". I used to used LaunchBar but switched to Quicksilver because 1) it's free 2) the icon doesn't have to be in the dock 3) it's a whole lot prettier.

I use the dock for my immediate applications its rare i use a program thats not in my dock but when I do a quick run to the finder :) I'm happy with my dock + Finder way of doing things. :D

*Cough* Beats having a start bar with like a million diff names of applications in it *Cough*

I have my 14 most used apps in the Dock. For everything else, I installed an app (forget the name) that puts 'Applications' in the Apple menu. Hover over it, and the list of everything in the 'applications' folder drops down. Very easy to use, no need for an extra dock icon or to open the finder.

The what Chad? :blink: Doesn't mean alot to me, post a pic or something of what you're talking about! :p

Sorry for going off-topic but that phone looks SWEET! Can I buy one of those and use it with Verizon Wireless or is it only for select providers like Cingular?

Sorry for going off-topic but that phone looks SWEET! Can I buy one of those and use it with Verizon Wireless or is it only for select providers like Cingular?

hahaha, The phone Steve/Neyo has can be bought simcard-free and unlocked so it will work on any network in UK (where he lives) it can be snapped up for a big round sum of ?500 (its not cheap). I'm sure you can pick it up online though, I know they sell it cheap at www.gsmphonesource.com

Sorry for going off topic!. :((

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Wow, Microsoft IS cooking lately... This only shows that they COULD improve, they just chose not to for whatever reasons. That obsession with AI was destroying them from the inside out.
    • BATorrent 4.1.0 by Razvan Serea BATorrent is a lightweight, open-source BitTorrent client built with modern C++ and Qt 6, offering a clean, fast, and privacy-focused alternative to traditional torrent apps. It supports magnet links, .torrent files, resume data, sequential downloading, per-file priorities, and even imports from qBittorrent. Power users benefit from integrated RSS auto-download with regex filtering, duplicate detection, and automatic tracker lists from Stremio. Streaming is seamless thanks to auto-detected players like VLC and IINA. BATorrent includes robust VPN tools—interface binding, auto-detection for WireGuard-based services like Mullvad and NordLynx, kill switch, proxy support, and IP filtering. A full WebUI enables remote control, while integrations with Plex, Jellyfin, and Emby automate library updates. With themes, speed scheduling, system-tray alerts, and cross-platform support for Windows, Linux, and macOS, BATorrent delivers a polished, high-performance torrenting experience. BATorrent features: Core .torrent file and magnet link support Resume data — picks up where you left off after restart Import torrents from qBittorrent Create .torrent files from any file or folder Sequential download mode Per-file priority control (skip, low, normal, high) Seed ratio limits with auto-pause DHT, PEX, UPnP, NAT-PMP RSS Auto-Download Subscribe to RSS feeds — automatically download new torrents as they appear Regex filters — match only what you want (e.g. 1080p|720p, S01E\d+) Per-feed settings — custom save path, check interval (5–1440 min), enable/disable Auto-download — matched items are downloaded automatically in the background Supports magnet links, .torrent URLs, and tags Tray notifications when items are auto-downloaded Duplicate detection — never downloads the same item twice Stremio Stremio Addon System pre-installed — works out of the box Auto tracker list from ngosang/trackerslist Streaming Play while downloading — stream video files before the download is complete Supports mp4, mkv, avi, mov, wmv, flv, webm, m4v, ts Auto-detects installed players (VLC, IINA, system default) VPN & Privacy Interface binding — lock torrent traffic to a specific network interface (e.g. tun0) Auto VPN detection — identifies VPN interfaces (tun, tap, WireGuard, Mullvad, NordLynx, ProtonVPN) Kill switch — automatically pauses all torrents if the VPN interface drops Auto-resume — resumes only the torrents paused by the kill switch when VPN reconnects Proxy support — SOCKS5 and HTTP proxy with optional authentication IP filtering — load P2P blocklists to block unwanted IP ranges Protocol encryption (enabled / forced / disabled) WebUI Remote management — control torrents from any browser at http://localhost:8080 REST API with JSON responses Add torrents via magnet link or .torrent upload Pause, resume, remove torrents remotely View peers and files per torrent Dark theme matching the desktop app HTTP Basic Auth with SHA-256 password hashing Configurable port and remote access (localhost vs 0.0.0.0) Interface 3 themes: Dark, Light, Midnight (bat/vampire aesthetic) Real-time speed graph Detailed panel with tabs: General, Peers, Files, Trackers Filter bar: search by name, filter by state (Active, Downloading, Seeding, Paused, Finished) Drag & drop .torrent files and magnet links Drag & drop reorder in torrent list System tray with notifications (download complete, kill switch events, RSS auto-downloads) Splash screen with bat animation Bilingual: English and Portuguese (BR), auto-detected from system locale Bandwidth Scheduler Alternative speed limits — set different download/upload limits on a schedule Time range — configure active hours (e.g. 01:00 to 07:00), supports overnight ranges Per-day control — choose which days of the week the schedule applies Automatically switches between normal and alternative speeds Media Server Integration Plex — automatically trigger library scan when a download completes Jellyfin / Emby — same automatic library refresh via API Configure server URL and authentication token/key in Settings System Cross-platform: Windows, Linux, macOS Auto-shutdown — automatically shut down PC when all downloads complete (60s cancellable countdown) Auto-update system (AppImage on Linux, installer on Windows, DMG on macOS) CLI arguments: pass .torrent files or magnet: URIs directly Keyboard shortcuts: Space to toggle pause, Ctrl+A to select all, Ctrl+O to open BATorrent 4.1.0 release notes: A community-driven release: everything here came straight from your reports and requests. It closes the remaining gaps with qBittorrent and fixes the Windows settings/tray/splash issues several of you hit. Fixed Settings now actually save. A whole class of preferences — speed limits (and the alternative limits), max active downloads, seed ratio, listen port, max connections, DHT/uTP/encryption, VPN interface, kill switch and proxy — weren't being persisted and reset to defaults on every launch. They now round-trip correctly. (Thanks to everyone who reported "the upload limit always goes back to 0".) Splash and tray toggles stick on Windows. Turning off the startup animation (or "close to tray") no longer reverts — the Windows registry stored these booleans as integers and the UI was misreading them. Close-to-tray hint. The first time the window hides to the tray you get a one-time notification, so the app doesn't look like it vanished (Windows 11 tucks new tray icons into the overflow). macOS Dock icon size. The icon filled its canvas edge-to-edge and rendered larger than neighbouring apps; it now uses the standard safe-area padding. Native file picker language. The "Torrent file / All files" filter in the open dialog follows the app language instead of being hard-coded. Added — qBittorrent parity Alternative speed limits toggle — a turtle button in the toolbar flips your throttled limits on/off instantly, independent of the scheduler. Follow system theme — switch light/dark automatically with the OS (Settings → Appearance). Pre-allocate disk space — reserve the full file size up front to reduce fragmentation (Settings → Downloads). Recheck data on add — optionally force a hash check when adding a torrent, so existing or partial files on disk are detected. Port status indicator — a 🔴 dot in the status bar shows whether your listen port looks reachable (UPnP/NAT-PMP + listen state; fully local, no external check). Add torrent from URL — File → Add torrent from URL (Ctrl+U) fetches a remote .torrent and routes it through the normal add dialog. Export .torrent — right-click a torrent → Export .torrent to save its metadata file. Already there (in case you missed it) Watch folder — auto-add .torrent files dropped into a monitored directory (Settings → Files). This release just surfaces it. Incomplete files already carry a .!bt suffix until they finish. Under the hood Regression tests for the settings-persistence and Windows boolean bugs. A new Qt Quick Test harness covering the startup splash and the design-system widgets. Download: BATorrent 4.1.0 | 37.5 MB (Open Source) Download: BATorrent Portable | 51.7 MB Links: BATorrent Website | Screenshot | Changelog Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Disabling open on hover, great! That was so stupid! They need to do a fix, where if a network share is disconnected, it doesn't hang when opening "This PC" for 20 seconds.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      PsYcHoKiLLa
      170
    3. 3
      +Edouard
      163
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      78
  • Tell a friend

    Love Neowin? Tell a friend!