CPU cache MOD ?


Recommended Posts

IS there away to Add more Cache to an CPU ?

like take two of the same cpu's like two 766mhz celeron's and take the cache off of one and add to the other ? .. Or add even more like make it have 1 or 2 megs of cache ? can this be done & if u seen a website do this .. PLEASE post a link i wanna see this.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/
Share on other sites

  OptimalOptimusPrimus said:
DUDE .. its' the L2 cache it's under the CPU on celerons.. that's how they make celerons .. there the same as a pentium 3.. but with half the cache !

584771092[/snapback]

the stuff you think are cache are actually capacitors, not cache, cache in the celeron processor had always been embedded into the core logic.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771135
Share on other sites

No, those are capacitors or something else. Besides, isn't a 766MHz Celeron one of the FCPGA type CPU's with the core exposed like the Athlon Tbirds and XP's? If so, the cache IS embedded in the core and no way to remove it. I remember when AMD put 512KB cache onto the Athlon XP's, the core itself got bigger.

celeron.jpg

That's what your Celeron looks like no doubt, since it would be P3 Coppermine based and not off the P2 cores like the 500Mhz and slower Celerons (maybe 550 as well?) But yours has the core exposed like that, and the cache is in that core, NOT anywhere else on the CPU.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771159
Share on other sites

These two types are, of course, Level 1 and Level 2 cache. Cache acts as a middle man between your processor and your main memory subsystem, instead of wasting time going directly to the memory for a data request, your CPU can request data directly from its Level 1 (L1) cache which is located on the processor itself or from the system's Level 2 (L2) cache which can be located anywhere from the processor itself to the motherboard depending on your CPU.. I will post a pic of my celeron 766mhz cpu .. UNDER the green board in that pic u posted.. is the L2 Cache lol I promise .....Otherwise how would Intel be able to remove it ..take the pentium to a celeron .. they remove Half the cache. from 256K .. to 128 K

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771185
Share on other sites

How about I go find a core shot of the coppermine CPU's then? I am sure there is one that points out exactly where the L2 is. And how does intel cut the cache? Well it could be hardware disabled, or it could be a very similar core, just the cache is cut in half physically and they are manufactured almost the same with the exception of that, still keeping costs down.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771197
Share on other sites

Well, since you seem to know it all (the cache IS located on-die starting with the P3 and ALL Celerons, I am currently studying computer engineering, so I hope that I would know). Yes, you just need to solder a few more capacitors on the bottom of your cpu, then you'll have 4 gigs of L2 cache.

  OptimalOptimusPrimus said:
These two types are, of course, Level 1 and Level 2 cache.  Cache acts as a middle man between your processor and your main memory subsystem, instead of wasting time going directly to the memory for a data request, your CPU can request data directly from its Level 1 (L1) cache which is located on the processor itself or from the system's Level 2 (L2) cache which can be located anywhere from the processor itself to the motherboard depending on your CPU.. I will post a pic of my celeron 766mhz cpu .. UNDER the green board in that pic u posted.. is the L2 Cache lol I promise .....Otherwise how would Intel be able to remove it ..take the pentium to a celeron .. they remove Half the cache. from 256K .. to 128 K

584771185[/snapback]

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771227
Share on other sites

HERE we go, this will stop this non-sense right now...

  Quote
The part that all other 0.18-micron Intel CPUs have been derived from is the Pentium III based on the Coppermine core with 256KB of on-die L2 cache operating at clock speed.
Yeah, it says ON-DIE L2 cache, which means its on that little black rectangle. :)
  Quote
The new Celeron processors are based on a variant of the Coppermine Pentium III core.  Internally, they are based on a core known as the Coppermine128, which refers to the 128KB of on-die L2 cache they are outfitted with versus the 256KB that is on the regular Coppermine Pentium III core.

Overclocking the FC-PGA Celeron - AnandTech

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771228
Share on other sites

  OptimalOptimusPrimus said:
These two types are, of course, Level 1 and Level 2 cache.  Cache acts as a middle man between your processor and your main memory subsystem, instead of wasting time going directly to the memory for a data request, your CPU can request data directly from its Level 1 (L1) cache which is located on the processor itself or from the system's Level 2 (L2) cache which can be located anywhere from the processor itself to the motherboard depending on your CPU.. I will post a pic of my celeron 766mhz cpu .. UNDER the green board in that pic u posted.. is the L2 Cache lol I promise .....Otherwise how would Intel be able to remove it ..take the pentium to a celeron .. they remove Half the cache. from 256K .. to 128 K

584771185[/snapback]

again, those are capacitors, elements that basically storage voltage (think of it as a temp. battery)

intel disabled the 128kb of cache on your celeron, and there is no way to enable it back period.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771248
Share on other sites

  OptimalOptimusPrimus said:
OK here are 3 pics of my Celeron 766mhz cpu Socket 370

SO what are the little things under the Chip. .and what are they for ? and WHy are there sum missing :o) ?

584771256[/snapback]

god damn it, they are not missing, it's just that this is the setting for the celeron (possibily same for the PIII coppermines too) but changing those caps won't help you to enable your phantom cache at all.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771267
Share on other sites

They are probably just capacitors and who know swhy they are missing, could not be needed in the Celeron design model, but those are NOT cache chips, as stated, the cache is on that black rectangle that sits ontop of the CPU. Further reading into that Anadtech article reveals that the Coppermine Celerons are not P3 rejects and do not have the cache disabled, the extra cache is just not there and there is NO way to put it there. Read the anadtech article, it goes into the cache about the Coppermine Celerons, and how it is slower and what not, but yeah, you are stuck with 128KB of cache, starting with the Coppermine cores for Intel, the L2 cache was moved onto the die, and still is there today in the P4's, Pentium M's, Xeons, and Celerons. Now the Xeons might have external L3 on the CPU board somewhere, but not sure.

Right from the article about the l2 cache:

  Quote
For starters, something must be made very clear about the Coppermine128.  When Intel produces a Coppermine128-based Celeron, they don?t simply take a regular Coppermine Pentium III and disable half of the cache, and the Coppermine128 isn?t made up from the Coppermine Pentium III rejects.  This we have confirmed from reliable sources inside Intel, and we?ve known this ever since the release of the Celeron.
Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771268
Share on other sites

  Martog said:
They are probably just capacitors and who know swhy they are missing, could not be needed in the Celeron design model, but those are NOT cache chips, as stated, the cache is on that black rectangle that sits ontop of the CPU.  Further reading into that Anadtech article reveals that the Coppermine Celerons are not P3 rejects and do not have the cache disabled, the extra cache is just not there and there is NO way to put it there.  Read the anadtech article, it goes into the cache about the Coppermine Celerons, and how it is slower and what not, but yeah, you are stuck with 128KB of cache, starting with the Coppermine cores for Intel, the L2 cache was moved onto the die, and still is there today in the P4's, Pentium M's, Xeons, and Celerons.  Now the Xeons might have external L3 on the CPU board somewhere, but not sure.

Right from the article about the l2 cache:

584771268[/snapback]

on the Xeons, the L3 cache is on die too, not exactly why they just don't increase the L2 cache instead, I might find out why after taking my VLSI course in a year or so though.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771283
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Meta says that its "Private Processing technology" will be used. Oh, thank God! Now, I will finally sleep a whole lot better at night trusting FB. 🙄🙄🙄
    • The Teams Admin center is still a mess. I use it all the time. They really need to talk with the Intune or Entra ID folks for help.
    • Senua's Saga: Hellblade II to get 60FPS mode, dev commentary, and more alongside PS5 launch by Pulasthi Ariyasinghe Back in May, Microsoft revealed Senua's Saga: Hellblade II as the next first-party Xbox game to reach PlayStation platforms. Now, that release has an official release date attached to it, and alongside it, developer Ninja Theory is releasing an update across all platforms with some major features, including a 60 FPS mode on consoles. The Performance Mode is easily the biggest addition to the story-focused immersive experience. Ninja Theory is delivering it to both Xbox Series X and PlayStation 5 players, but there is some bad news for Series S owners, as it is being left out from the upgrade. "The result is smoother gameplay, especially noticeable during combat and fast-moving moments of the game," says the developer. It's unclear how much of the game's visuals Performance Mode users will be missing out on compared to the default 30FPS "cinematic" mode. PC players are getting an upgrade too. A Very High preset is being added to the settings menu for those wanting even higher fidelity graphics. Optimizations have also been a focus on PC, and Ninja Theory says that the title will be Steam Deck Verified when the Enhanced update lands in August. Next, similar to the original, Dark Rot is incoming as an optional experience that players can enable when starting a campaign. This will have a rot effect being applied to Senua every time she dies, and if it ever reaches her head, the game will come to an end, with all progress from that save being wiped. The Photo Mode in Hellblade II is being upgraded with this update too, with the studio touting a new Motion tab for cinematic video capture, as well as improvements across the board to the feature. Lastly, four hours of developer commentary is being added to give a behind-the-scenes look at how the studio crafted the story and gameplay. "Hear from the ensemble cast, key collaborators in depicting Senua’s experience of psychosis, and members of the development team who poured their heart and soul into Senua’s story," says the studio. The Senua’s Saga: Hellblade II Enhanced comes out on August 12 across PC, Xbox Series X|S, and PlayStation 5 for all owners and Game Pass subscribers as a free upgrade. As for the PlayStation 5 launch of Senua’s Saga: Hellblade II that's happening on the same day, Microsoft will be offering two versions: Standard and Deluxe. As expected, Standard includes the complete base game for $49.99, but Deluxe goes further by adding on a copy of the first game, Hellblade: Senua’s Sacrifice, as well as its original soundtrack. The Deluxe Edition costs $69.99 to purchase.
    • Not sure what you’re talking about. Has been there for quite a while and in the latest versions it’s actually quite good. I use it several times a day as I am a terrible typist.
  • Recent Achievements

    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
    • One Year In
      Bert Fershner earned a badge
      One Year In
    • Reacting Well
      ChrisOdinUK earned a badge
      Reacting Well
    • One Year In
      Steviant earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      549
    2. 2
      ATLien_0
      209
    3. 3
      +FloatingFatMan
      172
    4. 4
      Michael Scrip
      152
    5. 5
      Som
      142
  • Tell a friend

    Love Neowin? Tell a friend!