CPU cache MOD ?


Recommended Posts

IS there away to Add more Cache to an CPU ?

like take two of the same cpu's like two 766mhz celeron's and take the cache off of one and add to the other ? .. Or add even more like make it have 1 or 2 megs of cache ? can this be done & if u seen a website do this .. PLEASE post a link i wanna see this.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/
Share on other sites

  OptimalOptimusPrimus said:
DUDE .. its' the L2 cache it's under the CPU on celerons.. that's how they make celerons .. there the same as a pentium 3.. but with half the cache !

584771092[/snapback]

the stuff you think are cache are actually capacitors, not cache, cache in the celeron processor had always been embedded into the core logic.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771135
Share on other sites

No, those are capacitors or something else. Besides, isn't a 766MHz Celeron one of the FCPGA type CPU's with the core exposed like the Athlon Tbirds and XP's? If so, the cache IS embedded in the core and no way to remove it. I remember when AMD put 512KB cache onto the Athlon XP's, the core itself got bigger.

celeron.jpg

That's what your Celeron looks like no doubt, since it would be P3 Coppermine based and not off the P2 cores like the 500Mhz and slower Celerons (maybe 550 as well?) But yours has the core exposed like that, and the cache is in that core, NOT anywhere else on the CPU.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771159
Share on other sites

These two types are, of course, Level 1 and Level 2 cache. Cache acts as a middle man between your processor and your main memory subsystem, instead of wasting time going directly to the memory for a data request, your CPU can request data directly from its Level 1 (L1) cache which is located on the processor itself or from the system's Level 2 (L2) cache which can be located anywhere from the processor itself to the motherboard depending on your CPU.. I will post a pic of my celeron 766mhz cpu .. UNDER the green board in that pic u posted.. is the L2 Cache lol I promise .....Otherwise how would Intel be able to remove it ..take the pentium to a celeron .. they remove Half the cache. from 256K .. to 128 K

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771185
Share on other sites

How about I go find a core shot of the coppermine CPU's then? I am sure there is one that points out exactly where the L2 is. And how does intel cut the cache? Well it could be hardware disabled, or it could be a very similar core, just the cache is cut in half physically and they are manufactured almost the same with the exception of that, still keeping costs down.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771197
Share on other sites

Well, since you seem to know it all (the cache IS located on-die starting with the P3 and ALL Celerons, I am currently studying computer engineering, so I hope that I would know). Yes, you just need to solder a few more capacitors on the bottom of your cpu, then you'll have 4 gigs of L2 cache.

  OptimalOptimusPrimus said:
These two types are, of course, Level 1 and Level 2 cache.  Cache acts as a middle man between your processor and your main memory subsystem, instead of wasting time going directly to the memory for a data request, your CPU can request data directly from its Level 1 (L1) cache which is located on the processor itself or from the system's Level 2 (L2) cache which can be located anywhere from the processor itself to the motherboard depending on your CPU.. I will post a pic of my celeron 766mhz cpu .. UNDER the green board in that pic u posted.. is the L2 Cache lol I promise .....Otherwise how would Intel be able to remove it ..take the pentium to a celeron .. they remove Half the cache. from 256K .. to 128 K

584771185[/snapback]

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771227
Share on other sites

HERE we go, this will stop this non-sense right now...

  Quote
The part that all other 0.18-micron Intel CPUs have been derived from is the Pentium III based on the Coppermine core with 256KB of on-die L2 cache operating at clock speed.
Yeah, it says ON-DIE L2 cache, which means its on that little black rectangle. :)
  Quote
The new Celeron processors are based on a variant of the Coppermine Pentium III core.  Internally, they are based on a core known as the Coppermine128, which refers to the 128KB of on-die L2 cache they are outfitted with versus the 256KB that is on the regular Coppermine Pentium III core.

Overclocking the FC-PGA Celeron - AnandTech

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771228
Share on other sites

  OptimalOptimusPrimus said:
These two types are, of course, Level 1 and Level 2 cache.  Cache acts as a middle man between your processor and your main memory subsystem, instead of wasting time going directly to the memory for a data request, your CPU can request data directly from its Level 1 (L1) cache which is located on the processor itself or from the system's Level 2 (L2) cache which can be located anywhere from the processor itself to the motherboard depending on your CPU.. I will post a pic of my celeron 766mhz cpu .. UNDER the green board in that pic u posted.. is the L2 Cache lol I promise .....Otherwise how would Intel be able to remove it ..take the pentium to a celeron .. they remove Half the cache. from 256K .. to 128 K

584771185[/snapback]

again, those are capacitors, elements that basically storage voltage (think of it as a temp. battery)

intel disabled the 128kb of cache on your celeron, and there is no way to enable it back period.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771248
Share on other sites

  OptimalOptimusPrimus said:
OK here are 3 pics of my Celeron 766mhz cpu Socket 370

SO what are the little things under the Chip. .and what are they for ? and WHy are there sum missing :o) ?

584771256[/snapback]

god damn it, they are not missing, it's just that this is the setting for the celeron (possibily same for the PIII coppermines too) but changing those caps won't help you to enable your phantom cache at all.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771267
Share on other sites

They are probably just capacitors and who know swhy they are missing, could not be needed in the Celeron design model, but those are NOT cache chips, as stated, the cache is on that black rectangle that sits ontop of the CPU. Further reading into that Anadtech article reveals that the Coppermine Celerons are not P3 rejects and do not have the cache disabled, the extra cache is just not there and there is NO way to put it there. Read the anadtech article, it goes into the cache about the Coppermine Celerons, and how it is slower and what not, but yeah, you are stuck with 128KB of cache, starting with the Coppermine cores for Intel, the L2 cache was moved onto the die, and still is there today in the P4's, Pentium M's, Xeons, and Celerons. Now the Xeons might have external L3 on the CPU board somewhere, but not sure.

Right from the article about the l2 cache:

  Quote
For starters, something must be made very clear about the Coppermine128.  When Intel produces a Coppermine128-based Celeron, they don?t simply take a regular Coppermine Pentium III and disable half of the cache, and the Coppermine128 isn?t made up from the Coppermine Pentium III rejects.  This we have confirmed from reliable sources inside Intel, and we?ve known this ever since the release of the Celeron.
Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771268
Share on other sites

  Martog said:
They are probably just capacitors and who know swhy they are missing, could not be needed in the Celeron design model, but those are NOT cache chips, as stated, the cache is on that black rectangle that sits ontop of the CPU.  Further reading into that Anadtech article reveals that the Coppermine Celerons are not P3 rejects and do not have the cache disabled, the extra cache is just not there and there is NO way to put it there.  Read the anadtech article, it goes into the cache about the Coppermine Celerons, and how it is slower and what not, but yeah, you are stuck with 128KB of cache, starting with the Coppermine cores for Intel, the L2 cache was moved onto the die, and still is there today in the P4's, Pentium M's, Xeons, and Celerons.  Now the Xeons might have external L3 on the CPU board somewhere, but not sure.

Right from the article about the l2 cache:

584771268[/snapback]

on the Xeons, the L3 cache is on die too, not exactly why they just don't increase the L2 cache instead, I might find out why after taking my VLSI course in a year or so though.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771283
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Google Chrome is ending support for two ancient versions of Android by Usama Jawad Google Chrome is the most used browser right now, with the competition trailing far behind. What browser you use typically ends up being a matter of preference and familiarity, but all vendors are trying to one-up each other as they vy for more market share. Recently, Google claimed that Chrome is now faster than ever while Microsoft boasted that Edge is better at ad-blocking than Google's offering. Regardless of all these factors, Chrome commands a significant market share, even on legacy systems. Now, Google has announced that it is ending support for Chrome on two legacy versions of Android. In a brief blog post, Google has announced that it is dropping support for Chrome on Android 8 Oreo and Android 9 Pie with the upcoming version 139 of the browser expected to release on August 5. Right now, the current stable version of Chrome is 137, which means that Chrome 138 will be the last version of the browser to support these legacy operating systems. In practice, this means that Chrome will require Android 10.0 or above on mobile platforms in order to receive further updates. While the browser will continue working on older versions of Android, they will not receive updates, which means that they'll be left insecure and vulnerable to cybersecurity threats. As expected, Google has recommended that users on older systems should migrate to at least Android 10 in order to continue receiving updates on Chrome. While the company hasn't explicitly stated a reason behind its decision, it likely has to do with the dwindling user base of these old versions of Android and Google's ambitions to get more people to upgrade to newer versions of its mobile operating system. It's important to note that Android 8 was released in August 2017 and received its final security patch in October 2021. Meanwhile, Android 9 was rolled out to the public in August 2019 and netted its final update in January 2022. So in retrospect, Google has already been offering Chrome support for these legacy versions long after they hit end-of-support themselves.
    • I use two of these in RAID0 for video games and other things, together they are capable of 2.8 million IOPS and 15 GB/s on Gen4. At this price, 4 TB of Gen4 is faster and less expensive than a single 2 TB Gen5 NVMe, not to mention easier to cool off. Highly recommend.
    • that is a normal sign in, they just put in a dumb location to try to hide it... and yes I think the whole MS account by default is BS too, the first question should be do you want an online profile or a local one
    • From our past comments, it looks like some ppl are defo enjoying these stories.
    • You are missing the point, we should not have to do that. Should have a do you want an MS account option on the normal sign in.
  • Recent Achievements

    • Dedicated
      tesla maxwell earned a badge
      Dedicated
    • Dedicated
      Camlann earned a badge
      Dedicated
    • Week One Done
      fredss earned a badge
      Week One Done
    • Dedicated
      fabioc earned a badge
      Dedicated
    • Week One Done
      GoForma earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      632
    2. 2
      Michael Scrip
      224
    3. 3
      ATLien_0
      219
    4. 4
      +FloatingFatMan
      143
    5. 5
      Xenon
      134
  • Tell a friend

    Love Neowin? Tell a friend!