CPU cache MOD ?


Recommended Posts

IS there away to Add more Cache to an CPU ?

like take two of the same cpu's like two 766mhz celeron's and take the cache off of one and add to the other ? .. Or add even more like make it have 1 or 2 megs of cache ? can this be done & if u seen a website do this .. PLEASE post a link i wanna see this.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/
Share on other sites

  OptimalOptimusPrimus said:
DUDE .. its' the L2 cache it's under the CPU on celerons.. that's how they make celerons .. there the same as a pentium 3.. but with half the cache !

584771092[/snapback]

the stuff you think are cache are actually capacitors, not cache, cache in the celeron processor had always been embedded into the core logic.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771135
Share on other sites

No, those are capacitors or something else. Besides, isn't a 766MHz Celeron one of the FCPGA type CPU's with the core exposed like the Athlon Tbirds and XP's? If so, the cache IS embedded in the core and no way to remove it. I remember when AMD put 512KB cache onto the Athlon XP's, the core itself got bigger.

celeron.jpg

That's what your Celeron looks like no doubt, since it would be P3 Coppermine based and not off the P2 cores like the 500Mhz and slower Celerons (maybe 550 as well?) But yours has the core exposed like that, and the cache is in that core, NOT anywhere else on the CPU.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771159
Share on other sites

These two types are, of course, Level 1 and Level 2 cache. Cache acts as a middle man between your processor and your main memory subsystem, instead of wasting time going directly to the memory for a data request, your CPU can request data directly from its Level 1 (L1) cache which is located on the processor itself or from the system's Level 2 (L2) cache which can be located anywhere from the processor itself to the motherboard depending on your CPU.. I will post a pic of my celeron 766mhz cpu .. UNDER the green board in that pic u posted.. is the L2 Cache lol I promise .....Otherwise how would Intel be able to remove it ..take the pentium to a celeron .. they remove Half the cache. from 256K .. to 128 K

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771185
Share on other sites

How about I go find a core shot of the coppermine CPU's then? I am sure there is one that points out exactly where the L2 is. And how does intel cut the cache? Well it could be hardware disabled, or it could be a very similar core, just the cache is cut in half physically and they are manufactured almost the same with the exception of that, still keeping costs down.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771197
Share on other sites

Well, since you seem to know it all (the cache IS located on-die starting with the P3 and ALL Celerons, I am currently studying computer engineering, so I hope that I would know). Yes, you just need to solder a few more capacitors on the bottom of your cpu, then you'll have 4 gigs of L2 cache.

  OptimalOptimusPrimus said:
These two types are, of course, Level 1 and Level 2 cache.  Cache acts as a middle man between your processor and your main memory subsystem, instead of wasting time going directly to the memory for a data request, your CPU can request data directly from its Level 1 (L1) cache which is located on the processor itself or from the system's Level 2 (L2) cache which can be located anywhere from the processor itself to the motherboard depending on your CPU.. I will post a pic of my celeron 766mhz cpu .. UNDER the green board in that pic u posted.. is the L2 Cache lol I promise .....Otherwise how would Intel be able to remove it ..take the pentium to a celeron .. they remove Half the cache. from 256K .. to 128 K

584771185[/snapback]

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771227
Share on other sites

HERE we go, this will stop this non-sense right now...

  Quote
The part that all other 0.18-micron Intel CPUs have been derived from is the Pentium III based on the Coppermine core with 256KB of on-die L2 cache operating at clock speed.
Yeah, it says ON-DIE L2 cache, which means its on that little black rectangle. :)
  Quote
The new Celeron processors are based on a variant of the Coppermine Pentium III core.  Internally, they are based on a core known as the Coppermine128, which refers to the 128KB of on-die L2 cache they are outfitted with versus the 256KB that is on the regular Coppermine Pentium III core.

Overclocking the FC-PGA Celeron - AnandTech

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771228
Share on other sites

  OptimalOptimusPrimus said:
These two types are, of course, Level 1 and Level 2 cache.  Cache acts as a middle man between your processor and your main memory subsystem, instead of wasting time going directly to the memory for a data request, your CPU can request data directly from its Level 1 (L1) cache which is located on the processor itself or from the system's Level 2 (L2) cache which can be located anywhere from the processor itself to the motherboard depending on your CPU.. I will post a pic of my celeron 766mhz cpu .. UNDER the green board in that pic u posted.. is the L2 Cache lol I promise .....Otherwise how would Intel be able to remove it ..take the pentium to a celeron .. they remove Half the cache. from 256K .. to 128 K

584771185[/snapback]

again, those are capacitors, elements that basically storage voltage (think of it as a temp. battery)

intel disabled the 128kb of cache on your celeron, and there is no way to enable it back period.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771248
Share on other sites

  OptimalOptimusPrimus said:
OK here are 3 pics of my Celeron 766mhz cpu Socket 370

SO what are the little things under the Chip. .and what are they for ? and WHy are there sum missing :o) ?

584771256[/snapback]

god damn it, they are not missing, it's just that this is the setting for the celeron (possibily same for the PIII coppermines too) but changing those caps won't help you to enable your phantom cache at all.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771267
Share on other sites

They are probably just capacitors and who know swhy they are missing, could not be needed in the Celeron design model, but those are NOT cache chips, as stated, the cache is on that black rectangle that sits ontop of the CPU. Further reading into that Anadtech article reveals that the Coppermine Celerons are not P3 rejects and do not have the cache disabled, the extra cache is just not there and there is NO way to put it there. Read the anadtech article, it goes into the cache about the Coppermine Celerons, and how it is slower and what not, but yeah, you are stuck with 128KB of cache, starting with the Coppermine cores for Intel, the L2 cache was moved onto the die, and still is there today in the P4's, Pentium M's, Xeons, and Celerons. Now the Xeons might have external L3 on the CPU board somewhere, but not sure.

Right from the article about the l2 cache:

  Quote
For starters, something must be made very clear about the Coppermine128.  When Intel produces a Coppermine128-based Celeron, they don?t simply take a regular Coppermine Pentium III and disable half of the cache, and the Coppermine128 isn?t made up from the Coppermine Pentium III rejects.  This we have confirmed from reliable sources inside Intel, and we?ve known this ever since the release of the Celeron.
Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771268
Share on other sites

  Martog said:
They are probably just capacitors and who know swhy they are missing, could not be needed in the Celeron design model, but those are NOT cache chips, as stated, the cache is on that black rectangle that sits ontop of the CPU.  Further reading into that Anadtech article reveals that the Coppermine Celerons are not P3 rejects and do not have the cache disabled, the extra cache is just not there and there is NO way to put it there.  Read the anadtech article, it goes into the cache about the Coppermine Celerons, and how it is slower and what not, but yeah, you are stuck with 128KB of cache, starting with the Coppermine cores for Intel, the L2 cache was moved onto the die, and still is there today in the P4's, Pentium M's, Xeons, and Celerons.  Now the Xeons might have external L3 on the CPU board somewhere, but not sure.

Right from the article about the l2 cache:

584771268[/snapback]

on the Xeons, the L3 cache is on die too, not exactly why they just don't increase the L2 cache instead, I might find out why after taking my VLSI course in a year or so though.

Link to comment
https://www.neowin.net/forum/topic/233147-cpu-cache-mod/#findComment-584771283
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It's a Developer Beta 1 not even a Public or User Beta, I doubt any of the design is 100% finalized yet.
    • Was going to comment the same thing. It's SO annoying to have to go back to settings every time I install something new or some apps like discord update and the icon is hidden again.
    • XRECODE3 1.167 by Razvan Serea xrecode3 is a converter and audio-grabber which allows you to convert from mp3, mp2, wma, aiff, amr, ogg, flac, ape, cue, ac3, wv, mpc, mid, cue ,tta, tak, wav, wav(rf64), dts, m4a, m4b, mp4, ra, rm, aac, avi, mpg, vob, mkv, mka, flv, swf, mov, ofr, wmv, divx, m4v, spx, 3gp, 3g2, m2v, m4v, ts, m2ts, adts, shn, tak, xm, mod, s3m, it, mtm, umx, mlp to m4a, alac, ape, flac, mp3, mp4 (using NeroAAC), ogg, raw, wav, wav(rf64), wma, WavPack, mpc, mp2, Speex, ofr, ac3, aiff, tak, snd and Shorten formats. Command Line parameters are supported. XRECODE3 features: Works on XP, Vista, Windows 7, Windows 8, 10 32/64 bit versions and under Wine. Parallel conversion by utilizing power of multi-core CPUs. Support of embedded CUE sheets (for FLAC, WavPack, APE and TAK files). Support of mp4, mka chapters (can split mp4, mka by chapters to any supported format). Built-in Metadata editor with Cover Art support. Has support for LossyWav. Supports portable mode. Merge input files to one large audio file and create CUE sheet. Converting to many formats at once using "Multiple" output mode. Grabbing of multi-channel Audio CDs to the desired format at once. Informative and resizable UI suited even for netbooks. Extracting audio from flv, avi, mov etc. video files (multiple audio streams are supported). Can export/import Metadata to/from external file. Support for 24/32bit audio files. Multilanguage support. Currently program is available in Dutch, English, French, Japanese, Korean, Polish, Russian, Hungarian, Italian, Spanish, Spanish Traditional, Swedish, Brazilian Portuguese, German, Finnish, Bulgarian, Czech, Danish and Chinese (simplified) languages. What's new in XRECODE3: Native 64bit support. Added support for DSD/DST and DFF formats (including handling of SACD ISOs). Added option to extract audio without transcoding. Added option to encode several files to one multi-channel file. Added option to split file into individual track-per-channel for all available output formats. Added option to merge files per folder. Output and Metadata settings are now output format specific. Enhanced Metadata settings. Added support for multiple Cover pictures in Metadata editor. Added 32bit int/float output for formats which support them (e.g. WAV). Added dithering option in Output Settings. Added option to use EBUR128 in Normalize. Added option to Album Mode Normalize. Added option to configure Matrices under Output Settings. Added more output file pattern elements. Tabbed UI. CUE files are now displayed more nicely. Enhanced Shell Extension. XRECODE3 1.167 changelog: Added option to handle YEAR and DATE tags (under Settings/Metadata/Advanced). Updated to the latest qaac (2.85). Download: XRECODE3 v1.167 (64-bit) | Portable | ~30.0 MB (Shareware) Download: XRECODE3 v1.167 (32-bit) | Portable Link: XRECODE3 Homepage | XRECODE3 Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hasleo Disk Clone 5.2.2.1 by Razvan Serea Hasleo Disk Clone is a free and all-in-one disk cloning software for Windows 11/10/8/7/Vista and Windows Server that can help you migrate Windows OS to another disk, clone one disk to another disk or clone one partition to another location quickly and efficiently. Completely Free Windows Migration and Disk/Partition Cloning Software Migrate Windows from one disk to another without reinstalling Windows, apps. Clone one disk to another and makes the data on 2 disks are exactly the same. Clone a partition to another location without losing any data. Easily adjust the size and location of the destination partition. Convert MBR to GPT or convert GPT to MBR by cloning. Creation of Windows PE emergency disk. Extremely fast cloning speed and multi-language support. Supported OS: Windows Vista/Server 2008 or later, fully compatible with GPT and UEFI. Note: Hasleo Disk Clone 5.2.2.1 changelog is not yet available. Download: Hasleo Disk Clone 5.2.2.1 | 28.8 MB (Freeware) Link: Hasleo Disk Clone Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Shouldn't using "High Performance" mode prevent c-states from initializing? Maybe AMD hasn't built a proper power plan for their x3d processors like they used to for their ryzen chips.
  • Recent Achievements

    • First Post
      Johnny Mrkvička earned a badge
      First Post
    • Week One Done
      viraltui earned a badge
      Week One Done
    • One Month Later
      serfegyed earned a badge
      One Month Later
    • Dedicated
      firey earned a badge
      Dedicated
    • Dedicated
      fettermanj earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      634
    2. 2
      ATLien_0
      229
    3. 3
      Michael Scrip
      218
    4. 4
      Xenon
      149
    5. 5
      Steven P.
      140
  • Tell a friend

    Love Neowin? Tell a friend!