Recommended Posts

Someone asked about this earlier so I thought I'd write a guide on it. This will help you optimize the battery life of your laptop so that it might actually reach the advertised specifications and maybe even a bit more. I'm assuming that you have a modern laptop with a SpeedStep (P3/P3-M/P4/P4-M/PM) or PowerNow(Athlon/XP/64)-capable CPU, but many of the suggestions will work even on older laptops.

First, let's get the obvious out of the way:

1) Set your screen brightness as low as it can go before it becomes uncomfortable.

2) In your BIOS, set your power options to battery optimized/max battery/etc. (that is, if you have such an option).

3) Set your power options to battery optimized in Windows. Depending on the CPU that you have and the drivers that your manufacturer supplied with your laptop, there are different ways of doing this. You might have a Fn key that lets you change the power settings or an icon next to your clock that is something either specific to your laptop or a flag icon for Intel's SpeedStep. In Windows XP, setting your power options to max battery in the control panel's power management applet should also set the SpeedStep/PowerNow to its battery-optimized setting automatically. For older versions of Windows and AMD CPUs you can enabled battery-optimized mode by going to the AMD PowerNow tab in the control panel's power options.

And now for the less obvious:

4) If you have discreet graphics (ATI Mobility Radeon, nVidia Geforce Go), underclocking the graphics chip will imrpove battery life. For ATI graphics, you can use ATITool and for nVidia graphics you can use RivaTuner, although you can of course choose any other tool (Omega drivers, PowerStrip, etc.) if you prefer.

5) Underclock and undervolt your CPU. Most laptops don't have overclocking options so you need to use something like CPUMSR to do it in Windows. It'll let you change the multiplier on any CPU but it won't let you set it higher than the default (only lower). It also lets you change the core voltage, but you should be carefull as not to set it too low and thereby causing your system to crash. A note for people with Pentium Ms: CPUMSR seems to have a bug that detects Pentium Ms as Pentium 3s so you need to go to configuration and disable user protection. After this you can manually select Pentium M and change the multiplier/voltage there.

6) Disable all network connections that you aren't using. This will usually disable the actual hardware and give you a few more minutes of battery life. Also disable your modem in the device manager (control panel > system > hardware > device manager) if you don't use it.

7) Remove your optical drive. Replace it with a plastic blank if your laptop came with one. If you can't remove it, disabling it in the device manager will probably also help.

8) In power options, set your hard disk turn-off timer to 3 minutes (the lowest).

9) Keep a conservative number of programs running. Fewer open programs and lower RAM usage will improve battery life.

10) As an elaboration to step 1), try a tool such as PowerStrip or the gamma tool that comes with Adobe Photoshop to increase your screen's brightness and contrast via software. This will allow you to set the hardware brightness of your screen a bit lower but it's not suitable if you're doing anything more than typing/reading.

11) Your sound chip might also have a power-conservation mode. Check your control panel to see if your sound chip's drivers came with any special applets that might have an option to enable it. Most SigmaTel chips have this.

There's a good chance you can also use two batteries in your laptop. Check with your laptop's manufacturer to see if they make a battery that can be swapped with the optical drive. If not, you can also buy a second main battery and swap them as needed while putting Windows into hibernation. Also regarding batteries, you should always allow them to fully dischage before recharging them. This will allow them to hold their full charge and it will reduce the memory effect (which still exists to a small extent with lithium-ion batteries).

After I did all of these things on my laptop, I was able to get 5 1/2 hours out of it. It's rated at 4 1/2 hours and it usually does 3 1/2 without optimizations. If you spot any inaccuracies in this guide or if you think there's something missing, please post it here.

Edited by Cephas
Link to comment
https://www.neowin.net/forum/topic/235598-optimizing-battery-life/
Share on other sites

  • 1 month later...

This is something i heard sometime ago in regarts to laptop batteries.

If you are going to have you laptop plugged in all the time remove the battery .

They guy said that the same principles apply to laptop batteries as to gsm batteries.

Any truth to this ? :wacko:

rgds

Briliant and Essential guide

will try most of it ( a bit too late since my battery only lasts 15min now (2 years old!!wtf)

I heard that putting it in a Fridge helps???????

You forgot the most basic one - take your battery out until you really need it.

Thanx

584804226[/snapback]

If you put your laptop into the fridge, your battery will drain a lot faster, the reason being of course, is that the laptop battery is chemical based, and I don't think it likes it's electrolyte frozen.

Yes, you should take your battery out if you use your laptop while plugged in a lot, but if you use it more while on the go then it's more convenient to just leave it in all the time. Something that should be considered is that removing the battery can unbalance the weight of the laptop, so you might not be able to open it with one hand or it might even tip over when the screen is open.

Also, I highly recommend against putting a battery in a fridge or freezer. Most batteries caution against storing it in extremely high or low temperatures.

Here's some more information on battery care:

http://www.laptopbattery.net/notebookbatteries_life.html

  • 4 weeks later...
  • 2 months later...

Hey there,

Good guide.

I would just like to warn about one thing that I found to be a bit wacky... the suggestion to underclock the video card. I have an ATI Radeon 9200 Mobility. I tried to use ATITool to underclock it from 250MHz to 200MHz. After I did that, I started to get compatibility issues with WindowBlinds. Even using ATITool to set the settings back to default didn't work. Ultimately the fix was to use the built in ATI Control Panel to reset all the performance settings to default.

Other than that, all else I agree upon. I've been following that kind of thinking for a year now, and I get 6 hours with my Compaq Presario X1050CA. :)

Cheers!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft is busy. Lots of changes to be released imminently for Windows server or soon. Also, lots happening for next version as well. Third party virus scanning software is being moved out of Kernel mode to avoid repeat of Crowdstrike incident. Windows Protected Mode and Windows Ready Print no longer require third party print drivers to be installed. New storage stack being developed. New NVME drivers now available for Windows Server 2025 to improve local NVME drive performance by 60+ percent. NVME-Of of fabric being worked on for next release to improve network access to NVME drives. ReFs (next file system) now has ability to boot and will become default file system in next release of Windows Server. ReFs improves on NTFS in several areas including resiliency and reliability and scalability. New update stack is being worked on to unify Windows updates, and updates for drivers and first party/3rd party application software. A stricter and more robust third-party driver certification program (ODI) is being worked on to improve performance, thermals, battery life, and reliability on modern Windows hardware by tightening how OEMs and IHVs (Intel, AMD, Qualcomm, NVIDIA, etc.) build and ship drivers. There is a tone more but too numerous to mention.
    • Now disable that stupid OneDrive backup request when Windows starts please. So unbelievably frustrating to only have “remind me later” instead of “no and never ask me again”
    • Hello, The Media Creation Tool is still at v10.0.26100.7019 from October 2025. Just looks like the backend has been updated. Regards, Aryeh Goretsky
    • Since they open sourced the calculator in Win 10/11 it is much better and can do a lot, I love it.
    • That's just silly imo. The lengths that man goes to just to avoid W11 is just nuts. Very, very few home users would do that. I will say this though, he is committed. Btw, I note on askwoody that Woody Leonhard passed away March, 2025 aged 73. His site was one of my favorites back in the day. Belated yes but RIP Woody.
  • Recent Achievements

    • One Month Later
      Markus94287 earned a badge
      One Month Later
    • Week One Done
      Markus94287 earned a badge
      Week One Done
    • One Year In
      Markus94287 earned a badge
      One Year In
    • Dedicated
      truespursfan earned a badge
      Dedicated
    • Rookie
      restore went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      168
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!