Recommended Posts

Someone asked about this earlier so I thought I'd write a guide on it. This will help you optimize the battery life of your laptop so that it might actually reach the advertised specifications and maybe even a bit more. I'm assuming that you have a modern laptop with a SpeedStep (P3/P3-M/P4/P4-M/PM) or PowerNow(Athlon/XP/64)-capable CPU, but many of the suggestions will work even on older laptops.

First, let's get the obvious out of the way:

1) Set your screen brightness as low as it can go before it becomes uncomfortable.

2) In your BIOS, set your power options to battery optimized/max battery/etc. (that is, if you have such an option).

3) Set your power options to battery optimized in Windows. Depending on the CPU that you have and the drivers that your manufacturer supplied with your laptop, there are different ways of doing this. You might have a Fn key that lets you change the power settings or an icon next to your clock that is something either specific to your laptop or a flag icon for Intel's SpeedStep. In Windows XP, setting your power options to max battery in the control panel's power management applet should also set the SpeedStep/PowerNow to its battery-optimized setting automatically. For older versions of Windows and AMD CPUs you can enabled battery-optimized mode by going to the AMD PowerNow tab in the control panel's power options.

And now for the less obvious:

4) If you have discreet graphics (ATI Mobility Radeon, nVidia Geforce Go), underclocking the graphics chip will imrpove battery life. For ATI graphics, you can use ATITool and for nVidia graphics you can use RivaTuner, although you can of course choose any other tool (Omega drivers, PowerStrip, etc.) if you prefer.

5) Underclock and undervolt your CPU. Most laptops don't have overclocking options so you need to use something like CPUMSR to do it in Windows. It'll let you change the multiplier on any CPU but it won't let you set it higher than the default (only lower). It also lets you change the core voltage, but you should be carefull as not to set it too low and thereby causing your system to crash. A note for people with Pentium Ms: CPUMSR seems to have a bug that detects Pentium Ms as Pentium 3s so you need to go to configuration and disable user protection. After this you can manually select Pentium M and change the multiplier/voltage there.

6) Disable all network connections that you aren't using. This will usually disable the actual hardware and give you a few more minutes of battery life. Also disable your modem in the device manager (control panel > system > hardware > device manager) if you don't use it.

7) Remove your optical drive. Replace it with a plastic blank if your laptop came with one. If you can't remove it, disabling it in the device manager will probably also help.

8) In power options, set your hard disk turn-off timer to 3 minutes (the lowest).

9) Keep a conservative number of programs running. Fewer open programs and lower RAM usage will improve battery life.

10) As an elaboration to step 1), try a tool such as PowerStrip or the gamma tool that comes with Adobe Photoshop to increase your screen's brightness and contrast via software. This will allow you to set the hardware brightness of your screen a bit lower but it's not suitable if you're doing anything more than typing/reading.

11) Your sound chip might also have a power-conservation mode. Check your control panel to see if your sound chip's drivers came with any special applets that might have an option to enable it. Most SigmaTel chips have this.

There's a good chance you can also use two batteries in your laptop. Check with your laptop's manufacturer to see if they make a battery that can be swapped with the optical drive. If not, you can also buy a second main battery and swap them as needed while putting Windows into hibernation. Also regarding batteries, you should always allow them to fully dischage before recharging them. This will allow them to hold their full charge and it will reduce the memory effect (which still exists to a small extent with lithium-ion batteries).

After I did all of these things on my laptop, I was able to get 5 1/2 hours out of it. It's rated at 4 1/2 hours and it usually does 3 1/2 without optimizations. If you spot any inaccuracies in this guide or if you think there's something missing, please post it here.

Edited by Cephas
Link to comment
https://www.neowin.net/forum/topic/235598-optimizing-battery-life/
Share on other sites

  • 1 month later...

This is something i heard sometime ago in regarts to laptop batteries.

If you are going to have you laptop plugged in all the time remove the battery .

They guy said that the same principles apply to laptop batteries as to gsm batteries.

Any truth to this ? :wacko:

rgds

Briliant and Essential guide

will try most of it ( a bit too late since my battery only lasts 15min now (2 years old!!wtf)

I heard that putting it in a Fridge helps???????

You forgot the most basic one - take your battery out until you really need it.

Thanx

584804226[/snapback]

If you put your laptop into the fridge, your battery will drain a lot faster, the reason being of course, is that the laptop battery is chemical based, and I don't think it likes it's electrolyte frozen.

Yes, you should take your battery out if you use your laptop while plugged in a lot, but if you use it more while on the go then it's more convenient to just leave it in all the time. Something that should be considered is that removing the battery can unbalance the weight of the laptop, so you might not be able to open it with one hand or it might even tip over when the screen is open.

Also, I highly recommend against putting a battery in a fridge or freezer. Most batteries caution against storing it in extremely high or low temperatures.

Here's some more information on battery care:

http://www.laptopbattery.net/notebookbatteries_life.html

  • 4 weeks later...
  • 2 months later...

Hey there,

Good guide.

I would just like to warn about one thing that I found to be a bit wacky... the suggestion to underclock the video card. I have an ATI Radeon 9200 Mobility. I tried to use ATITool to underclock it from 250MHz to 200MHz. After I did that, I started to get compatibility issues with WindowBlinds. Even using ATITool to set the settings back to default didn't work. Ultimately the fix was to use the built in ATI Control Panel to reset all the performance settings to default.

Other than that, all else I agree upon. I've been following that kind of thinking for a year now, and I get 6 hours with my Compaq Presario X1050CA. :)

Cheers!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • These features described above are good, but far from what developers like me was eager to get. And that main feature that developers will love it`s the ability to connect to LOCAL AI models running on Ollama. So if you have a beefy spec machine you can now use your own model 100% local inside Visual Studio 2026 18.7.0
    • Microsoft Teams is getting a controversial location tracking feature that users may hate by Usama Jawad Image generated with Microsoft Copilot Earlier this year, Microsoft planned to roll out a controversial location tracking feature in Teams, but following customer feedback, it decided to delay its release. The bad news is that the company has decided to launch it later this year, but it's based on roughly the same design that was shared earlier, which means that many users still have good reason to worry. Basically, Microsoft Places and Teams have received workplace check-ins via Wi-Fi. The idea is that if an employee arrives at the office and connects to their enterprise network, their profile status indicator will show them as being present in the office. For example, if you arrive at work, open Teams on your PC, and connect to the "Studio B" company Wi-Fi network, your Teams profile will indicate that you are present in "Studio B", as shown below: Microsoft says that this feature is basically a replacement for physical workplace check-in peripherals, it reduces the need to manually update your status, and it also enables co-workers to know that you're at work so that they can coordinate in-person meetings with you. IT admins can enable this workplace check-in capability at a tenant level, and users have the ability to control whether they want to enable it or not. Of course, all of that sounds great on paper, but naturally, many Teams customers may still have concerns, as they did before. This is because it enables your reporting manager and other members of the organization to track if you are at the office, when you arrive at the office, and where you are right now. This could be problematic for people who work in what they consider to be flexible work environments or hybrid setups, and this kind of location tracking could be considered an invasion of privacy. Microsoft has tried to alleviate some of these concerns by letting users know that they can manually set their location easily, which essentially overrides workplace check-in if they feel uncomfortable with it. However, that doesn't really solve the problem because your organization could enforce a workplace policy that mandates that this feature remains enabled. The Redmond tech giant has also assured users that this capability does not store historical data and is only a real-time indicator of location. Finally, it only generates a signal when you connect to a corporate network, which means that if you are working from home and connect your PC to your personal Wi-Fi, it won't broadcast your location to your employer; you will simply be shown as "Remote". Microsoft has encouraged IT admins to prepare for this change and begin informing users so they know what to expect once it begins rolling out later this year.
    • Wow, Microsoft IS cooking lately... This only shows that they COULD improve, they just chose not to for whatever reasons. That obsession with AI was destroying them from the inside out.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      80
  • Tell a friend

    Love Neowin? Tell a friend!