Recommended Posts

Someone asked about this earlier so I thought I'd write a guide on it. This will help you optimize the battery life of your laptop so that it might actually reach the advertised specifications and maybe even a bit more. I'm assuming that you have a modern laptop with a SpeedStep (P3/P3-M/P4/P4-M/PM) or PowerNow(Athlon/XP/64)-capable CPU, but many of the suggestions will work even on older laptops.

First, let's get the obvious out of the way:

1) Set your screen brightness as low as it can go before it becomes uncomfortable.

2) In your BIOS, set your power options to battery optimized/max battery/etc. (that is, if you have such an option).

3) Set your power options to battery optimized in Windows. Depending on the CPU that you have and the drivers that your manufacturer supplied with your laptop, there are different ways of doing this. You might have a Fn key that lets you change the power settings or an icon next to your clock that is something either specific to your laptop or a flag icon for Intel's SpeedStep. In Windows XP, setting your power options to max battery in the control panel's power management applet should also set the SpeedStep/PowerNow to its battery-optimized setting automatically. For older versions of Windows and AMD CPUs you can enabled battery-optimized mode by going to the AMD PowerNow tab in the control panel's power options.

And now for the less obvious:

4) If you have discreet graphics (ATI Mobility Radeon, nVidia Geforce Go), underclocking the graphics chip will imrpove battery life. For ATI graphics, you can use ATITool and for nVidia graphics you can use RivaTuner, although you can of course choose any other tool (Omega drivers, PowerStrip, etc.) if you prefer.

5) Underclock and undervolt your CPU. Most laptops don't have overclocking options so you need to use something like CPUMSR to do it in Windows. It'll let you change the multiplier on any CPU but it won't let you set it higher than the default (only lower). It also lets you change the core voltage, but you should be carefull as not to set it too low and thereby causing your system to crash. A note for people with Pentium Ms: CPUMSR seems to have a bug that detects Pentium Ms as Pentium 3s so you need to go to configuration and disable user protection. After this you can manually select Pentium M and change the multiplier/voltage there.

6) Disable all network connections that you aren't using. This will usually disable the actual hardware and give you a few more minutes of battery life. Also disable your modem in the device manager (control panel > system > hardware > device manager) if you don't use it.

7) Remove your optical drive. Replace it with a plastic blank if your laptop came with one. If you can't remove it, disabling it in the device manager will probably also help.

8) In power options, set your hard disk turn-off timer to 3 minutes (the lowest).

9) Keep a conservative number of programs running. Fewer open programs and lower RAM usage will improve battery life.

10) As an elaboration to step 1), try a tool such as PowerStrip or the gamma tool that comes with Adobe Photoshop to increase your screen's brightness and contrast via software. This will allow you to set the hardware brightness of your screen a bit lower but it's not suitable if you're doing anything more than typing/reading.

11) Your sound chip might also have a power-conservation mode. Check your control panel to see if your sound chip's drivers came with any special applets that might have an option to enable it. Most SigmaTel chips have this.

There's a good chance you can also use two batteries in your laptop. Check with your laptop's manufacturer to see if they make a battery that can be swapped with the optical drive. If not, you can also buy a second main battery and swap them as needed while putting Windows into hibernation. Also regarding batteries, you should always allow them to fully dischage before recharging them. This will allow them to hold their full charge and it will reduce the memory effect (which still exists to a small extent with lithium-ion batteries).

After I did all of these things on my laptop, I was able to get 5 1/2 hours out of it. It's rated at 4 1/2 hours and it usually does 3 1/2 without optimizations. If you spot any inaccuracies in this guide or if you think there's something missing, please post it here.

Edited by Cephas
Link to comment
https://www.neowin.net/forum/topic/235598-optimizing-battery-life/
Share on other sites

  • 1 month later...

This is something i heard sometime ago in regarts to laptop batteries.

If you are going to have you laptop plugged in all the time remove the battery .

They guy said that the same principles apply to laptop batteries as to gsm batteries.

Any truth to this ? :wacko:

rgds

Briliant and Essential guide

will try most of it ( a bit too late since my battery only lasts 15min now (2 years old!!wtf)

I heard that putting it in a Fridge helps???????

You forgot the most basic one - take your battery out until you really need it.

Thanx

584804226[/snapback]

If you put your laptop into the fridge, your battery will drain a lot faster, the reason being of course, is that the laptop battery is chemical based, and I don't think it likes it's electrolyte frozen.

Yes, you should take your battery out if you use your laptop while plugged in a lot, but if you use it more while on the go then it's more convenient to just leave it in all the time. Something that should be considered is that removing the battery can unbalance the weight of the laptop, so you might not be able to open it with one hand or it might even tip over when the screen is open.

Also, I highly recommend against putting a battery in a fridge or freezer. Most batteries caution against storing it in extremely high or low temperatures.

Here's some more information on battery care:

http://www.laptopbattery.net/notebookbatteries_life.html

  • 4 weeks later...
  • 2 months later...

Hey there,

Good guide.

I would just like to warn about one thing that I found to be a bit wacky... the suggestion to underclock the video card. I have an ATI Radeon 9200 Mobility. I tried to use ATITool to underclock it from 250MHz to 200MHz. After I did that, I started to get compatibility issues with WindowBlinds. Even using ATITool to set the settings back to default didn't work. Ultimately the fix was to use the built in ATI Control Panel to reset all the performance settings to default.

Other than that, all else I agree upon. I've been following that kind of thinking for a year now, and I get 6 hours with my Compaq Presario X1050CA. :)

Cheers!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft releases major feature updates for stock Windows 11 apps by Taras Buria In addition to releasing new Windows 11 preview builds, Microsoft announced that inbox Windows apps now have dedicated release notes in the official documentation. At long last, users have access to all the release notes for each app, with changes listed in chronological order. Microsoft used to announce feature updates for stock apps with each build. Now, with Windows Insider release notes hosted on the Microsoft Learn website, each app has a dedicated space for its changelog, which is very useful for those who want to track new features and improvements. Alongside that, Microsoft dropped massive feature updates for six stock apps: Clock, Media Player, Calculator, Voice Recorder, Photos, and Paint. Each app packs quite a lot of changes and new capabilities, so here are the release notes. Here are quick notes so that you can jump to the app you are interested in the most: Calculator Camera Clock Media Player Paint Photos Sound Recorder Here is what is new for the Calculator in version 11.2605.9.0: More accurate square-root results — Fixed rare cases where a calculation that should equal zero (like sqrt(2.25) - 1.5) returned a tiny leftover value instead. Readable text in High Contrast themes — Settings text now shows the correct colors in the High Contrast Aquatic and Desert themes. Fixed layout for right-to-left languages — For languages like Arabic and Hebrew, the graph, number pad, equation fields, and scroll buttons now appear correctly oriented. Reliable launch after upgrading — Fixed an issue where upgrading from much older versions could leave outdated settings that stopped the app from opening. Here is what is new for the Camera app (version 2026.2605.7.0): Zoom slider works on more cameras — The zoom slider now works on the latest cameras, respects your system zoom settings, and updates instantly when you change those settings. Full range of zoom levels — Fixed an issue where the zoom slider only showed three steps on some devices that zoom in finer increments. Front camera works on more devices — Resolved a problem that blocked the front-facing camera on certain wide-angle devices. More video resolution choices — You can now pick video resolutions that were previously hidden; the app shows a heads-up warning instead of removing them. QR links you can still use — When a scanned QR code points to something with no matching app, the link is now copied to your clipboard (with a notification) while still offering a Store search. Smarter default settings — When you haven't set a preference, the app now follows your system settings by default. The Clock app has a massive changelog with the following improvements in version 11.2605.9.0: Timers keep counting after they hit zero — When a timer runs out, it now keeps counting up (for example, -00:27:31) so you can see how far past the time you've gone. You can turn off the daily goal — Focus Sessions now include an "Off" option so you can skip setting a daily goal entirely. New 15-minute snooze option — Alarms now offer a 15-minute snooze interval. Run up to 3 countdowns at once — The Countdown Widget now supports three simultaneous countdowns, up from two. Timer Widget notifications now appear — Fixed an issue where the "timer finished" notification didn't show when the timer was started from the widget. Less clutter in Focus Sessions — Tasks you've already completed no longer show up in the Focus Session task list. More accurate focus progress — Fixed a rounding issue that could show your daily focus progress as a minute short (for example, 49 minutes instead of 50). Smoother World Clock comparisons — The World Clock compare page now loads dates as you scroll, so it feels more responsive. Up-to-date World Clock locations — Refreshed country and city names to match their current names. Correct sun and moon icons during midnight sun — Fixed an icon that wrongly showed a moon during all-day daylight in polar regions. Fixed back-button behavior in clock comparisons — Pressing back once now takes you back as expected, instead of jumping the date to 1926. Corrected the Newfoundland time zone — Newfoundland now uses the right time zone (St. John's). Disabled alarms stay looking disabled — Editing a turned-off alarm no longer makes it appear turned on. Cleaner timer cards — The expand button is now turned off on timer cards that have no time set, preventing actions that wouldn't do anything. Clearer theme setting — Updated the wording to "Choose your preferred app theme." Smoother Settings links — The "About" links in Settings no longer trigger an unexpected "switch apps" prompt. Fixed spacing in Spotify settings — Corrected uneven spacing in the Spotify settings card. Better focus visibility in High Contrast — The focus highlight in World Clock is now clearly visible in the High Contrast Aquatic and Desert themes. No more double announcements — Screen readers no longer read the timer value twice. Countdown names read correctly — Screen readers now properly announce the name of each countdown. Keyboard focus stays put — Focus no longer disappears after you press the Timer Reset button. Clearer alarm toggle for screen readers — Tidied up how the alarm on/off switch is announced. The Media Player app received plenty of changes as well (version 11.2605.14.0): Custom captions — You can now personalize how closed captions appear, with caption styling tied to your Windows caption settings, plus a quick link to open those settings directly. "Indexing" banner in the play queue — When your media library is still being scanned, a banner now explains why some items may not appear yet. Fixed the look of selected items — Corrected a layout glitch with selected items in lists. Fewer playback failures — Improved how the app recognizes supported file types, so more files play without issues. Playlists need a name — You can no longer accidentally save a playlist with a blank name. Cleaner look for empty playlists — Improved how a playlist appears when it has no items yet. More stable play queue edits — Fixed a crash that could happen when changing the play queue while the app was switching between sessions. Clearer "missing codec" message — Improved the dialog that appears when a file needs a codec you don't have, with clearer guidance on what to do. A big update is also available for Paint in version 11.2605.61.0: Adjustable eraser transparency — You can now control how transparent the eraser is. Cleaner stamp brush strokes — Fixed visible color shifts and artifacts when using stamp-style brushes. JPEG photos save in place — Opening a rotated JPEG and pressing Save now overwrites the original instead of unexpectedly prompting "Save As." No more crash on bad image files — Opening a damaged or invalid image, from within the app, by double click, or commandline, now shows a clear error message instead of closing the app. Classic selection behavior restored — The selection outline now hides while you move, resize, or rotate a selection, just like in classic Paint. Tidier AI image panel — Fixed missing spacing at the bottom of the AI image generation panel for a cleaner layout. Visible button hover in light theme — Toolbar split buttons now show a clear hover highlight in the light theme. Snappier toolbar — Streamlined how the ribbon lays out, giving a small speed boost at startup. Fewer background crashes — Fixed a crash that could happen while background tasks were finishing up. Stable app shutdown — Prevented rare crashes when closing the app. Fixed layer removal glitch — Deleting the active layer no longer leaves the layers list in an inconsistent state. Here is what is new in the Photos app (version 2026.11060.2004.0): AI watermarking — AI-generated or edited images can now carry a visible Copilot watermark. You choose Never, Always, or Ask Every Time in Settings, with a confirmation when saving. The watermarking is off by default in settings. Better viewing of small images and pixel art — Tiny images (like 16×16 pixel art) now zoom in far more to fill the screen and stay crisp instead of looking blurry. Select scanned text with the keyboard — When text is detected in an image, you can now navigate and select it using the arrow keys, Shift+Arrow, Home/End, and Ctrl+A, with a clear focus highlight. Fixed a crash in text recognition — Resolved a crash that could close Photos while detecting text in images; the app now recovers gracefully. Easier keyboard navigation — Tabbing through the navigation bar no longer stops on hidden controls, so it takes a single Tab to move past it instead of three. And finally, here is the Sound Recorder (version 11.2605.1.0): Waveform shows with Bluetooth mics — The live waveform now displays correctly when you record using a Bluetooth audio device. No more stray scrollbar — A non-working horizontal scrollbar no longer appears at the bottom of the waveform unless you've zoomed in. Mark button ready right away — The Mark button no longer looks grayed out until you hover over it after opening the app. Markers hidden for WAV files — Markers are now turned off for WAV recordings, since that format can't store them — so they're no longer lost silently. Smoother deleting — Quickly pressing Delete and Enter to remove several recordings in a row no longer triggers a "file doesn't exist" error. Fixed a memory issue — Resolved a memory leak that occurred each time a recording started. You can find all these changelogs in the official documentation here.
    • again, an article about Microsoft Edge and ridicules hater's comments
    • From this very same article: "For organizations that prefer a “more deliberate pace”, the Extended Stable channel remains an option."
    • Or every other browser, because they all behave the same, at least the mainstream ones. Firefox does exactly the same: background updates, restart to install them. Haters gotta hate, I guess.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      494
    2. 2
      PsYcHoKiLLa
      166
    3. 3
      +Edouard
      162
    4. 4
      Steven P.
      86
    5. 5
      ATLien_0
      77
  • Tell a friend

    Love Neowin? Tell a friend!