Hunt For The San Andreas Big Foot


Recommended Posts

I found him! I found him! I found him!!!!! and not only once but every

time I go back to the area. Here's what you have to do. First make sure

you have a camera. Then head down to the area southeast of Mt. Chiliad

called Shady Creek. Once you get to Shady Creek look around for a cabin

with a quad next to it. After you find it search the area around the

cabin and the surrounding woodlands. Eventually you will hear a low

growl, which is an indicator that bigfoot is around. After you hear it

stop, stand still, and look around you and if you see something moving

and there will be bigfoot. BUT IF YOU LOOSE SITE OF HIM HE WILL BE GONE,

AND YOULL HAVE TO START ALL OVER. HAPPY BIGFOOT HUNTING!!!

This was on another forum I tryed it for 2 seconds but I'm not sure It's fake. some other guy said that the instructions helped him I'll try it all today and report back.

585259055[/snapback]

so you guys are saying that this is not true and it is bullshi*?

i did pretty much join this palce just so i can share with you this..

well about an hour ago i gave up on Bigfoot and started seaching for the Loch Ness Monster because i had read a letter over at IGN that says something about bigfoot not in but something in deep water in. For some reason before i started my real search i decided to go up on the bridge (the one Stigmata|Mess was talking about earlier on page 3 with the "there is no easter egg up here" on it) well i got up there and i looked down and saw

THE LOCH NESS MONSTER!! :cool:

that thing was huge and almost knocked me off the bridge. after that my game froze up because i fell off onto it and i had to restart it. i didn't get a pic and this was about an hour ago Illinois time.

so the "there is no easter egg up here" is true because the Loch Ness Monster is right below you. now it makes perfect sense. please credit me, spike2690 for finding this because i'm sure someone will come along and copy it onto another site but feel free to post this where you like.

0. Save your game

1. Find that bridge

2. Get to the message

3. Look down to see the Loch Ness Monster.

It's not really much of a "Loch Ness" monster if it's not in the loch ness.

I'm going to check it out soon to see if it is true, but being the doubtfull manticore i am, i am very sure that it's not true, as it is, once again, too big for the game.

I will check it out, and try to get a pic if it is true.

ps. I doubt it is true

pss. i really doubt that it is true.

i was reading about 'the panoptican killer' on a site the other day, its sposed to be a dude with an apron and a chainsaw, im pretty sure

its bullkakke but anyway i went for a game of gta:sa.

Was driving around on some poor yokels bike when i came to an area and 'The panoptican' came up in the corner.

For some unknown reason i became really scared lol.

yes its me again......... more stuff here for martin to cuss down untill he tries it and says omg infoking is right again....... top of mt.chilliad, stand by the journey campavan thing (if its not there then just walk round the other side and come back, it should appear) arm ureself with heatseeker roket launcher ( cheat is=r1 r2 l1 r2 left down right up left down down down) aim at the mountain bike till the cursor is red then shoot it..... ready?....this is the trik.... you r clearly standing far enough away not to be harmed so shoot it and wonder y the hell uve cort on fire...... do the health cheat=(r1 r2 l1 x left down right up left down right up) many times or else ull die.... the fire will burn and eventualy go then start again the go and again and gain and again.... infact the only way to stop the 'curse' is to jump of mt. chilliad..... while being cursed (on endless fire) all manner of things will be attracted to u (planes crash on u, helicopters and i was hit by a boat that dropped out of the sky) friked up or what?

Okay, now I think you people are really making up stuff. Some of it was belivable like the ghost cars, but the loch ness monster....I have gone past that bridge so many times and I have not seen one thing out of the ordinary. And the Panoptican area on the map, there is nothing on top of the mountain but empty logger cabins, a chainsaw you can pick up, and an old damaged car. I even stayed there for a 24-hour period. It rained, it got foggy, there was a full moon, and nothing happened. It is all bull.

Edited by jmole

I am 100% with Jmole there, as I totally agree that this topic has mainly been used for people to distribute all their bull.

Yeti/Bigfoot- fake

Pigsy- fake

Ghost cars- true

photgraphers- true

loch ness monster- p*** off

the panopticon killer- fake

ps. to infoknig, how the HELL did u find out my name woz martin?

waitaminute....(checks username)......oh, i see....

I havnt tried that mt.chillad thing but i was playing SA last night and i was in the countyside cant remember where exactly but it was by these 5-6 little houses in a row just off a road with a flame thrower by them. Anyways i pick the the flamethrower up and kill this dude with it but for some reason i caught fire even tho i didn't walk into the flames. Anyway the fire went off me but then started back straight up again even though i didnt walk into any fire or use the flamethrower for the second time. The fire goes,comes back, goes and then finally kills me. Weird.

I am not sure if BigFoot is really in the game or not but I have been trying to find him all over SA. I read that he had been spotted in Shady Creeks and Mt. Chiliad. So I decided to try thoes areas. I went to the cabin in Shady Creeks at around 0:00am. It was glowing bright green. I waited there for 24 hours ( in the games time ), just to see what would happen. Well, the next time it was 0:00, I heard low growls about every 30 seconds! I looked all around the cabbin but never found him. I just kept hearing the growls. I decided to do a test, I walked away from the cabbin area and the growling stopped. So I went up to Mt. Chiliad and went into the cave/ tunnel part. And once again I heard the low growls. But still couldn't find him anywhere. So, maybe thats all there is to bigfoot in the game. Maybe its just low growls in the wood areas at night. Only when the Cabbin and Moutain are glowing around 0:00. Try it out for yourselves. I have done it 4 times and every time I hear the growls. Really weird. Maybe Rockstar added that in every certain amount of games. Oh, and I went back to CJs house and looked at that picture next to the tv, it was that bridge that has the sign that says " no eatser eggs up hear". I have seen Jawz there before so I know thats why.

So this is the next big thing since the triforce in Ocarina of Time? Ever thought that maybe an official statement and announcement would be made if these rumors were real and any of this was found? It'd be on there official pages and other big gaming sites, magazines and stuff. How about trying to ask Rockstar personally. Even if they don't show proof, they could at least confirm or deny if any of this is real or not.

To record yourself playing on your PS2, you have to plug the 3 coloured bits (yellow, red and white) into the back of your VCR (you might need a little socket thingie where you plug the 3cloured ones into) and the put your T.V on to your usual video viewing channel, and press the "INPUT" button. (on your VCR or VCR controller) if the screen goes black, press it again, as this will switch between the 2 input sockets. If you see your PS2 playing on the screen (on your VCR chammel)

then just press record. This is the most common way, and your VCR could be different.

You CAN record DVD's onto Video, but most dvd's will mainly be black when you try to record them due to copyright, but you can record some DVD's to video.

:D

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Movavi Video Editor Plus 26.18.0 by Razvan Serea With Movavi Video Editor Plus, you can either enhance your video files with two or three simple steps, or turn them into something completely new. Create your own movies using multiple filters, transitions, and special effects: show multiple videos on one screen with the Picture in picture effect or change the background with the Chroma Key effect, imitate the camera zoom or make your video look like an old-style movie. Adjust video parameters such as brightness, contrast and colors. Stabilize shaky footage, improve video quality and remove defects. Create video presentations, tutorials or educational videos: add titles and record your own narration to create a video with voiceover. Import video from any source: TV-tuner, webcam, camcorder, or VHS. Drop multiple media files onto a timeline and let your imagination do the rest! Features at a glance: Video and audio editing on a timeline Edit, enhance videos Add background music Apply titles and effects Image quality improvement Hollywood-worthy effects High-grade titles and fades Digitize VHS tapes, record video from TV tuners Stabilize any shaky sections Support for a wide range of formats Prepare your videos for uploading to YouTube, Facebook, Vimeo, or any other website New in Movavi Video Editor 2026: 30+ fresh subtitle styles. Upgrade your automatic captions with new designs. Customize your text in the Styles tab with a single click. Optional advanced settings are also available in the dedicated Design tab. Subtitles in English – instantly! Translate auto-subtitles into English with a click – no dictionaries or online services needed. Once translated, configure and fine-tune the subtitles using the standard editing tools. 40+ adjustable effects. Enhance your videos in a click with new realistic effects – from dust particles and light leaks to retro-style and VHS. Every effect is fully customizable – so it will fit any clip perfectly and bring an extra spark to your edits. Ultra-fast playback. Show more in less time with video speed control of up to 100x. Perfect for epic time-lapses, long process recaps, or whenever you want to add some extra energy to your content. Magnetic zones are marked with dots, and the 1x value is indicated by a vertical line. Silence removal – in a click. Cut out unwanted pauses automatically or fine-tune the pause length and volume threshold yourself. Skip the tedious cleanup and make your videos more dynamic. Fast effect copying. Effortlessly duplicate any effect from one video to another: click Clip effects in the dropdown menu and proceed to copy or paste. Movavi Video Editor Plus 26.18.0 changes: This version includes small improvements for better editing. Download: Movavi Video Editor Plus 26.18.0 | 2.7 MB (Shareware) View: Movavi Video Editor Plus Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • JBL BAR 800 5.1.2 Dolby Atmos soundbar is an amazing deal today by Sayan Sen This Amazon Prime Day 2026 sales so far we have had a couple of nice deals related to sound and audio. First we have the Sennheiser HD 600 at its lowest ever price of just $225. Next we also have the Beats Studio Pro at its lowest price ever at just $150. However perhaps you prefer your gear to sound great on a larger scale, like throughout the room. In that case an all-in-one soundbar system can help and currently JBL's BAR 800 is a great deal for sure as it's up for grabs at just $600 (purchase link under the specs table down below). One thing that should be appreciated a lot about these JBL soundbars is their spec sheet and the frequency response data it provides. The firm is honest about it as JBL confirms the subwoofer is able to go down to 35 Hz at -6dB or F6. This means it should be covering 40Hz and up very well, where most of the bass lies. You miss out on a lot of sub-bass but that is to be expected given the price point and the subwoofer driver size. Speaking of which, it is a 10-inch driver and promises a max output power of 300 watts at 1% THD (total harmonic distortion). JBL also claims the system will provide you with a "True Dolby Atmos" experience. The surround speakers are wireless and battery-powered which means setting them up should be really convenient. The technical specs of the JBL BAR 800 are given in the table below: Specification Value Channel Configuration 5.1.2-channel soundbar system Dolby Atmos Yes, with 2 up-firing drivers Total System Power Output 720 W Soundbar Power Output 340 W Surround Speaker Power Output 2 × 40 W Subwoofer Power Output 300 W Soundbar Drivers 3 × 46×90 mm racetrack drivers, 3 × 20 mm tweeters, 2 × 70 mm up-firing full-range drivers Surround Speaker Drivers 1 × 46×90 mm racetrack driver (each speaker) Subwoofer Driver 10-inch (260 mm) wireless subwoofer Frequency Response 35 Hz – 20 kHz (-6 dB) Audio Inputs Optical, Bluetooth, Chromecast built-in, AirPlay, Alexa Multi-Room Music (MRM), USB* HDMI Inputs 1 HDMI video input HDMI Output 1 HDMI eARC output HDCP Version 2.3 HDR Pass-Through HDR10, Dolby Vision Bluetooth Version 5.0 Wi-Fi Version 6, 6E Streaming Services Chromecast built-in, Apple AirPlay, Alexa MRM Get it at the link below: JBL Bar 800-5.1.2-Channel Dolby Atmos soundbar with Detachable Surround Speakers (Black): $599.85 (Sold and Shipped by Amazon US with Prime) Prime subscription can be cancelled within three business days. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Microsoft releases PowerToys v0.100.1, fixes a bug that made remapped keys misbehave by Ivan Jenic Microsoft just released PowerToys v0.100.1, a patch update that addresses several stability and behavior issues found in v0.100.0. The v0.100.0 patch was a significant update for PowerToys, as it introduced all sorts of new features and additions, such as a rebuilt Shortcut Guide, a Command Palette Extension Gallery, webcam overlay support in ZoomIt, and more. However, the v0.100.0 version also introduced some bugs and stability issues. And now, Microsoft is addressing these issues in the new patch. The most impactful fix in this release perhaps is in Keyboard Manager, where remapped modifier keys were being delivered as system-key events, causing unexpected behavior in apps. The clearest example of this was Alt-to-Backspace remaps, deleting whole words instead of a single character. So, if you thought there was an issue with your keyboard, Microsoft just confirmed that it was PowerToys. Beyond the Keyboard Manager fix, v0.100.1 also addresses several other issues. It fixes a bug with Power Display that was preventing monitors from waking from standby correctly. Additionally, the new update patches Quick Access crashes on launch, and resolves a Shortcut Guide crash that occurred when switching between sidebar sections. Here’s the full changelog: Color Picker Fixed a bug where the main Color Picker window could appear inside the zoomed-in picker view Command Palette Fixed Run history initialization in AOT builds Fixed a bug where the Performance Monitor dock item could show ??? after restart Fixed the Hibernate command using the Sleep icon Limited the "pin to dock" dialog to displays where the dock is enabled Keyboard Manager Fixed modifier keys remapped to non-modifier keys being delivered as system-key events, which caused unexpected behavior in apps such as Alt-to-Backspace deleting whole words Power Display Fixed a bug where selecting On in the monitor power-state control did not wake a monitor from standby Fixed built-in display detection and brightness control on dual-GPU laptops where the internal panel is driven by the discrete GPU PowerToys Run Fixed VS Code Workspaces discovery after VS Code moved recently opened workspace data to shared storage Quick Access Fixed Quick Access flyout crashes caused by unhandled XAML exceptions during launch or page navigation Shortcut Guide Fixed a crash when navigating between Shortcut Guide sidebar sections Fixed number-key rendering in shortcut manifests and added a Postman shortcut manifest Updated bundled shortcut manifests to use the literal number-key token so number keys render correctly across apps ZoomIt Fixed a race condition in audio initialization for ZoomIt video recording You can download PowerToys v0.100.1 from the official GitHub releases page.
    • OBS Studio 32.2.0 Beta 2 by Razvan Serea OBS Studio is software designed for capturing, compositing, encoding, recording, and streaming video content, efficiently. It is the re-write of the widely used Open Broadcaster Software, to allow even more features and multi-platform support. OBS Studio supports multiple sources, including media files, games, web pages, application windows, webcams, your desktop, microphone and more. OBS Studio Features: High performance real time video/audio capturing and mixing, with unlimited scenes you can switch between seamlessly via custom transitions. Live streaming to Twitch, YouTube, Periscope, Mixer, GoodGame, DailyMotion, Hitbox, VK and any other RTMP server Filters for video sources such as image masking, color correction, chroma/color keying, and more. x264, H.264 and AAC for your live streams and video recordings Intel Quick Sync Video (QSV) and NVIDIA NVENC support Intuitive audio mixer with per-source filters such as noise gate, noise suppression, and gain. Take full control with VST plugin support. GPU-based game capture for high performance game streaming Unlimited number of scenes and sources Number of different and customizable transitions for when you switch between scenes Hotkeys for almost any action such as start or stop your stream or recording, push-to-talk, fast mute of any audio source, show or hide any video source, switch between scenes,and much more Live preview of any changes on your scenes and sources using Studio Mode before pushing them to your stream where your viewers will see those changes DirectShow capture device support (webcams, capture cards, etc) Powerful and easy to use configuration options. Add new Sources, duplicate existing ones, and adjust their properties effortlessly. Streamlined Settings panel for quickly configuring your broadcasts and recordings. Switch between different profiles with ease. Light and dark themes available to fit your environment. …and many other features. For free. At all. OBS Studio 32.2.0 Beta 2 changelog: Beta 2 Changes Fixed a CI deployment issue. There are no application changes since Beta 1. 32.2 New Features Replaced add source dropdown with new dialog [Warchamp7] Improved FPS selector UX [jcm93] Added missing file support for filters [exeldro] Added ability for plugins to set custom icons for new source types [cg2121] Included .webp files when adding a directory to Image Slide Show source [TarunCore] Added copy paste functions to frontend API [exeldro] Added filter to compose SDR into HDR [jpark37] Added delete as a hotkey to delete sources on macOS [PatTheMav] Added dynamic bitrate support to multitrack video [lexano-ivs] 32.2 Changes Forced Intel-based installations to update to Apple Silicon version on macOS [PatTheMav] This change means that OBS Studio versions built for Intel-based Macs but running on Apple Silicon Macs will automatically update to OBS Studio built for Apple Silicon Macs. If an installation was using third-party plugins, those plugins will no longer load until replaced with Apple Silicon versions. Fixed audio mixer state getting out of sync when changing settings via websockets or plugins [Warchamp7] Added theming for checked QToolButtons [glikely] Improved OpenGL performance slightly on low-end machines [kkartaltepe] Set minimum size for color source to 1 pixel [exeldro] Added minimum width to spinboxes [Warchamp7] Disallowed overwriting the crash handler [sebastian-s-beckmann] Applied process mitigation policies for Windows [notr1ch] Adjusted description of multitrack video [jhnbwrs] Changed new capture devices to use fallback frame rate by default [PatTheMav] Improved DLL loading behavior on Windows [notr1ch] Limited multitrack video config to Custom service [PatTheMav] 32.2 Bug Fixes Fixed OAuth and dock state save corruption [PatTheMav] Fixed group bounds not resizing when removing items [howellrl] Fixed canvas mixes not being restored after video reset [dsaedtler] Fixed some erroneous crashes during shutdown [Warchamp7] Fixed display capture sometimes capturing black after a duplicator failure [ThrowTop] Fixed color of controls dock output buttons in System theme [shiina424] Fixed virtual camera reset failures [stephematician] Fixed potential crash when user discards changes in the settings window [suogesi] Fixed incorrect return value in virtualcam filter [xtfo] Fixed source toolbar buttons not working after dragging a source into a group [Warchamp7] Fixed properties hint icon spacing [Warchamp7] Fixed potential crash when a video device reconnects on macOS [jcm93] Fixed an issue where PipeWire could fail on NVIDIA GPUs [hoshinolina] Fixed obs_canvas_get_video_info returning incorrect framerate [dsaedtler] 32.2 Deprecations Deprecated obs_properties_add_button [sebastian-s-beckmann] Download: OBS Studio 32.2.0 Beta 2 | Portable | ARM64 | ~200.0 MB (Open Source) View: OBS Studio Homepage | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Is a fast food restaurant a good metric to compare against?
  • Recent Achievements

    • One Year In
      OHI Accounting earned a badge
      One Year In
    • First Post
      Almohandis earned a badge
      First Post
    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      474
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      122
    4. 4
      Michael Scrip
      83
    5. 5
      Xenon
      72
  • Tell a friend

    Love Neowin? Tell a friend!