Recommended Posts

Hello everybody!

I finally managed to register a Neowin account (www.spymac.com didn't seem to receive the registration mail ;) ), so here I am!

I've checked the Linux and Open Source boards several times already, and I quite like it in here! (well, so far!)

The Linux distributions I've given a try so far...

1. Knoppix (doesn't run too well on a PII 64 Mb RAM)

2. Damn Small Linux (lovely!)

3. VectorLinux (still on there)

4. Linux From Scratch (heh... isn't quite progressing)

I don't know all that much about Linux yet (some basic commands, and stuff), but I intend to do a stage 1 Gentoo install as soon as I get myself a laptop :-P

So, that's it about me.

How about you guys?

Link to comment
https://www.neowin.net/forum/topic/249356-just-another-linux-user/
Share on other sites

I don't know all that much about Linux yet (some basic commands, and stuff), but I intend to do a stage 1 Gentoo install as soon as I get myself a laptop :-P

584992682[/snapback]

Your quite mad. A stage 3 is hard enough for newbies and you want to jump right in wish the sharks wearing a steak suit...ok.

You wont notice that much of a speed gain from stage 1 to stage 3. It takes a loooong time and isnt worth it. All you are going to do is waste your time and end up with nothing. Master stage 3 and then work down...

Stage 2 actually isnt that much harder but adds extra time in comparison. Dont put yourself through needless punishment. Use flags and cflags dont net you THAT much of a speed increase. Having a 6 page make.conf isnt going to turn your PII into a P4.

My opinion on a full Gentoo install (compiling everything possible from source) is that it is:

  • Well Documented.
  • Possibly a way to learn, if you learn by typing in what is written in front of you.
  • Going to take a long time on a slower processor. (actually, it takes quite a while on a fast processor)
  • Marginally faster to run, if you set it properly (may be kind of tough to do)
  • Quite likely to not be worth it
  • A rite of passage for many Linux users (like, "why climb that mountain?" - "because it's there!")

Now, take those items with a large grain of salt. I have never installed Gentoo. I see what it is about and have decided it isn't worth it for me. It may be an exercise that you want to do. It certainly cannot hurt to give it a try.

Completely without disrespect but how can you have an a concise opinion of something if you have never tried it. I can say I dont like slack or ubuntu but I have never used them. For me to list off criteria on what is wrong with them and what is right is pointless as it is all founded on ignorance.

I mean some of your points are rather detailed: " Marginally faster to run, if you set it properly (may be kind of tough to do)". I am wondering how you could possibly know--enough to give advice on--if you have never used it...

Grain of salt or not, I am sure you are just excited to help, but maybe some more prudence should be used--I am not going to walk into a room and start telling neurologists how the brain works...

This is coming from a Gentoo user.

True.

But I have taken a look at some of the documentation. It is very well-written, and has a renowned reputation for being excellent. (as others who have installed Gentoo are also often quick to say how friendly and helpful online help in the Gentoo IRC channels are, as well)

Will it take long time to compile and install. Without a doubt.

Is it marginally faster? Many sources say so. However, I have not seen anything showing that there is a significant improvement in performance over say someone who properly sets up a Debian box.

The original poster has tried an LFS, and says it "isn't quite progressing". In my opinion, Gentoo probably isn't going to be what he wants. I may very well be wrong on this (as I have been wrong a great many times!), so that is why I say that "it certainly cannot hurt to give it a try".

True.

But I have taken a look at some of the documentation.  It is very well-written, and has a renowned reputation for being excellent.  (as others who have installed Gentoo are also often quick to say how friendly and helpful online help in the Gentoo IRC channels are, as well)

Will it take long time to compile and install.  Without a doubt.

Is it marginally faster?  Many sources say so.  However, I have not seen anything showing that there is a significant improvement in performance over say someone who properly sets up a Debian box.

The original poster has tried an LFS, and says it "isn't quite progressing".  In my opinion, Gentoo probably isn't going to be what he wants.  I may very well be wrong on this (as I have been wrong a great many times!), so that is why I say that "it certainly cannot hurt to give it a try".

584994816[/snapback]

Okay, I've forgotten a fase in my plans, and it apparently shouldn't have been forgotten :huh:

Before I do a Gentoo install, I first want to set up Arch Linux. When I get used to that, I'll give gentoo a try.

Now, that changes the entire idea a lot, doesn't it?

LFS is really not that hard, by the way. If I don't encounter any errors, it's possible to finish it.

My problem is: when I do encounter an error, I don't know what to do about it.

I can ask on a forum, but I'll probably get the answer 'RTFM!'.

I'm not asking anyone for help on my LFS installation. It wouldn't be fair to bug other people about something like that, when you're still too much of a newbie.

I don't expect a Gentoo installation to go that well, but I'm sure it's possible, even for a newbie.

I've seen the manual, and it's amazingly clear how you're supposed to do each step.

(as others who have installed Gentoo are also often quick to say how friendly and helpful online help in the Gentoo IRC channels are, as well)

584994816[/snapback]

Man, #gentoo on freenode is a nightmare. It's so busy in there that half the requests for help and guidance get washed away and forgotten. I used to hang around there and try to help people, but it really isn't practical... its just far, far too busy.

The forums rock, however, being probably the best linux support resource on the planet.

Installing gentoo is a rite of passage in the Linux world. I don't know how practical it is to use as those long compile times certainly aren't for everyone. I tried using it for about a year - and in that time I encountered many packages that simply wouldn't compile correctly. I ended up moving to Debian because I just wanted something that worked. LFS is a bigger rite of passage than gentoo though. The only problem with these is that they both tend to teach you much more about installing LFS and installing Gentoo than they do about using Linux in general - so even if you do complete the install process, you still find yourself at the end of the day with a lot of unanswered questions.

But as I said, at least it shows you have the balls for a challenge.

GJ

Why not give Arch 7.0 a try. It is fast, reliable, has pacman wich installs and resolves dependencies, possible to build from scratch and very good forums with experts helping all the way. I have tried Gentoo, Slackware, Debian, RedHat, Suse, name them all. Arch is the system for me. :yes:

Why not give Arch 7.0 a try. It is fast, reliable, has pacman wich installs and  resolves dependencies, possible to build from scratch and very good forums with experts helping all the way. I have tried Gentoo, Slackware, Debian, RedHat, Suse, name them all. Arch is the system for me. :yes:

584997088[/snapback]

I mentioned that a few posts below the top post ;-) I'm going to try Arch before giving Gentoo a try.

Does Arch have a default WM? If so, what is it?

I find gentoo pretty awesome, but not for a newbie linux user, it took me a good day to fully complete the install and have a working X setup.

Try something like ubuntu, I gave it a quick look here at work, the install looked easy & with debian package management you can't go wrong :)

I find gentoo pretty awesome, but not for a newbie linux user, it took me a good day to fully complete the install and have a working X setup.

Try something like ubuntu, I gave it a quick look here at work, the install looked easy & with debian package management you can't go wrong :)

585030647[/snapback]

Agreed.

Or, if you are dead set on a gentoo system, how about vidalinux? Gentoo install without the headaches.

I'll see, folks ;-)

Just relax.

If I can't work with Gentoo, I'll use something else.

I'm not gonna go back to windows, I can assure you!

Now if only I would get a laptop, so I could install Linux.

Vectorlinux on an old computer... Well, it's better than nothing :-P Too bad I don't have internet access on that one :cry:

Do a Gentoo Stage 1. It shouldnt be hard for anyone (the documentation is great) it will just take ages on your hardware to compile gcc and and anything else.

I did a Stage 2 install as my first Linux distro about a year and a half ago. Now when I need to put Gentoo on a system I use Stage 1. Optimized for my hardware perfectly.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • There is a lot of reasons not to use Edge but faster fixes and security updates is not one of them.
    • Can't reproduce. I installed Edge, went to neowin.net > accepted the cookie consent > used menu to go to forums, everything loads and I can browse around the forums. If you can't interact with the dialog on the forums for some reason, go to the main site and accept the cookie consent there? It is true that the site will not function properly until the cookie consent is accepted or rejected,. it's a legal requirement and I also know that certain VPN/ad blockers block it, which is a user related issue and not a neowin.net problem.   This is not our cookie consent dialog. Gotta love browser hijacking... /s Edit: this may be what Californians see, I will confirm with our consent provider.
    • Google Chrome 149.0.7827.115 (offline installer) by Razvan Serea The web browser is arguably the most important piece of software on your computer. You spend much of your time online inside a browser: when you search, chat, email, shop, bank, read the news, and watch videos online, you often do all this using a browser. Google Chrome is a browser that combines a minimal design with sophisticated technology to make the web faster, safer, and easier. Use one box for everything--type in the address bar and get suggestions for both search and Web pages. Thumbnails of your top sites let you access your favorite pages instantly with lightning speed from any new tab. Desktop shortcuts allow you to launch your favorite Web apps straight from your desktop. Chrome has many useful features built in, including automatic full-page translation and access to thousands of apps, extensions, and themes from the Chrome Web Store. Google Chrome is one of the best solutions for Internet browsing giving you high level of security, speed and great features. Important to know! The offline installer links do not include the automatic update feature. Download web installer: Google Chrome Web 32-bit | Google Chrome 64-bit | Freeware Download: Google Chrome Offline Installer 64-bit | Direct Link | 131.0 MB Download: Google Chrome Offline Installer 32-bit | Direct Link | 119.0 MB Download page: Google Chrome Portable Download: Chrome ARM64 | Direct Link View: Chrome Website | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Oh, it's happening on more than one dialog? This is the dialog that I'm unable to interact with.
    • WSCC - Windows System Control Center 10.0.3.8 by Razvan Serea Windows System Control Center is a free, portable program that allows you to install, update, execute and organize the utilities from various system utility suites. WSCC can install and update the supported utilities automatically. Alternatively, WSCC can use the http protocol to download and run the programs. WSCC is portable, installation is not required. Extract the content of the downloaded zip archive to any directory on your computer. Free for personal use. The setup packages and updates are downloaded directly from their author's website! This edition of WSCC supports the following utility suites: Windows Sysinternals Suite (including support for "Sysinternals Live" service) NirSoft Utilities Mitec and more... WSCC - Windows System Control Center 10.0.3.8 changelog: [NEW] update progress is now visible on the Windows taskbar [FIXED] fixed an issue with the Update dialog [FIXED] minor fixes Download: WSCC (64-bit) | 5.4 MB (Free for personal use) Download: WSCC (32-bit) | 6.3 MB View: WSCC Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      PsYcHoKiLLa
      170
    3. 3
      +Edouard
      164
    4. 4
      Steven P.
      85
    5. 5
      ATLien_0
      77
  • Tell a friend

    Love Neowin? Tell a friend!