Optimize XP - A Windows XP Optimization Guide v1.8


Recommended Posts

BootVis is not built into XP. Windows XP has a automatic boot time optimization routine that runs at an unknown time/date. BootVis allows you to optimize your boot up time when you want, it also lets you see graphically what is slowing down your bootup.

I didn't read all the posts, and I can't even remember where I found out about it, so if this one has been mentioned, forgive me, lol.

"The Tweaking Experience Registry Guide" seems pretty good.

http://windowsxp.homedns.org/

Seems to be set up nicely anyways.

That guide there is the perfect example of what I am trying to avoid, editing the registry is just a bad way to go about making changes to your system. You can do it much safer with applications, not to mention some of the tweaks mentioned are useless. 90% of the performance tweaks mentioned can be much easier and safely done using Cacheman. Alot of the "tweaks" are irrelevant or very application or instance specific that most users have no need for them. IMO it is messy, you have mentions of applications that do the same exact thing CCleaner and MRU Blaster. Then applications that are older versions of newer ones, XAIDA32 (Not even spelled right, should be AID32) and Everest. There are alot of things wrong there.

  • 2 weeks later...
Please note that Bootvis.exe is not a tool that will improve boot/resume performance for end users. Contrary to some published reports, Bootvis.exe cannot reduce or alter a system's boot or resume performance. The boot optimization routines invoked by Bootvis.exe are built into Windows XP. These routines run automatically at pre-determined times as part of the normal operation of the operating system.

http://www.microsoft.com/whdc/system/syspe...BootVisdwn.mspx

That guide there is the perfect example of what I am trying to avoid, editing the registry is just a bad way to go about making changes to your system. You can do it much safer with applications, not to mention some of the tweaks mentioned are useless. 90% of the performance tweaks mentioned can be much easier and safely done using Cacheman. Alot of the "tweaks" are irrelevant or very application or instance specific that most users have no need for them. IMO it is messy, you have mentions of applications that do the same exact thing CCleaner and MRU Blaster. Then applications that are older versions of newer ones, XAIDA32 (Not even spelled right, should be AID32) and Everest. There are alot of things wrong there.

585215021[/snapback]

cacheman is junk, xp manages it's memory better without any program like it, the best program to dl is not mentioned in your list, x-setup pro for editing the registry, ccleaner is good, never tried mru blaster... link?

This is quite clear in the guide:

"BootVis is a boot performance trace visualization and optimization tool. This tool invokes the built in Windows XP boot time optimization process when you run it, instead of waiting for it to be scheduled at some unknown time by Windows. You will notice immediate improvement in boot performance for this reason."

cacheman is junk, xp manages it's memory better without any program like it, the best program to dl is not mentioned in your list, x-setup pro for editing the registry, ccleaner is good, never tried mru blaster... link?
Again, Cacheman is specifically NOT used in the guide to manage memory, instead it is used as an easy way to optimize cache and memory related registry settings. It is specifically recommended NOT to load it at startup:

"Then under "Options" uncheck "Load Cacheman on Windows Startup", Exit and Save Cacheman."

Again, X-Setup lets you change alot of settings but not alot are related to performance. The ones that are, are already covered in the guide.

Edited by Mastertech
  • 2 weeks later...

personally... i think most of those guides (if not all) are close to useless/pointless.

as in most cases never offer any real performance increases... if anything i think it messes stuff up in certain cases.

to put it simply... DONT mess with settings like these ;) u will thank me in the long run.

Yeah, I don't use to toy around with things like this unless it's a specific setting I need to change for some very specific thing. I wouldn't recommend anyone starting to browse a list of stuff and "tweaking" settings. I've even seen stuff that automatically does it for you -- even worse. (it just takes one bug in such an app to mess up your system)

When Microsoft is setting default settings for Windows XP, you also need to understand it's not always for speed, but for stability too. Windows XP is also closed source, and you need to respect the fact that modifying "hidden" cool settings may have unintended and undocumented effect you can't gain proper support for. "Registry guides" are the worst and usually neglect these aspects. Or wait... No, I think the .sys file tweak to "improve" P2P app performance was.

NTFS registry changes like these in this guide makes me scared:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem]

"NtfsDisable8dot3NameCreation"=dword:00000001

I mean, that will instantly break anything that rely on 8.3 filenames in Windows.

You don't have any? You sure how the internals in all your apps work, and that none use any legacy file management code? Then go ahead and change it, but you won't improve the performance noticeably at all so there's no win in doing it. This change is to "make NTFS run better" according to the author though. Define "better".

Here we have another suggested change to destroy the cached data when you reboot:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]

"ClearPageFileAtShutdown"="1"

The author claims it prevents fragmenting, however in the same sentence he says he isn't sure. But go ahead and do it, it's "probably good". You won't keep the cache across sessions, but who cares? :huh: I also fail to see how forcing Windows to recreate a, say, 1024 MB file will in any way reduce fragmentation. More like the opposite. It's when data is reallocated, there's the risk of physical fragmentation, if you didn't know.

Edited by Jugalator
personally... i think most of those guides (if not all) are close to useless/pointless. as in most cases never offer any real performance increases... if anything i think it messes stuff up in certain cases. to put it simply... DONT mess with settings like these ;) u will thank me in the long run.

Pointless for those who do not care how fast their system runs. The real performance increases can be observed by those who take the time to run through their guide, results speak for themselves.

It is important you read the guide before making assumptions:

NTFS registry changes like these in this guide makes me scared:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem]

"NtfsDisable8dot3NameCreation"=dword:00000001

I mean, that will instantly break anything that rely on 8.3 filenames in Windows.

You don't have any? You sure how the internals in all your apps work, and that none use any legacy file management code? Then go ahead and change it, but you won't improve the performance noticeably at all so there's no win in doing it. This change is to "make NTFS run better" according to the author though. Define "better".

#1 no where in the guide are registry changes mentioned directly ESPECIALLY not this one. This one is included as an OPTION in Cacheman. If you follow the instructions it DOES NOT say to check this box by default. By default it is unchecked. If you follow the instructions this will not be enabled. The box also lists a CLEAR warning for those who want to turn it off: "Do not use with Norton Utilities, AntiVirus or System Works"

Here we have another suggested change to destroy the cached data when you reboot:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]

"ClearPageFileAtShutdown"="1"

The author claims it prevents fragmenting, however in the same sentence he says he isn't sure. But go ahead and do it, it's "probably good". You won't keep the cache across sessions, but who cares?

Huh? Are you even reading the same guide!? This is mentioned under XP-AntiSpy

"_ Clear pagefile at shutdown - This causes Windows XP to take longer to shutdown but is a good idea for security." What site are reading this nonsense in your post from? Please if your not going to take the time to read the guide do not post Misinformation.

  • 3 weeks later...

Optimize XP v1.9.0

v1.9.0

Spyware - Sun Java Virtual Machine Item Added

Spyware - All Java Instructions Updated

Spyware - All Java Links Updated

Utilities - Cacheman v5.50 Instructions Updated

Tweaks - Diskeeper Instructions Added

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ladybird Browser is no longer accepting outside contributions thanks to AI by David Uzondu The Ladybird Browser Project has announced it will no longer accept public pull requests and will limit changes to those made by its maintainers as it works towards its first alpha release. According to Ladybird's creator Andreas Kling, this is "not a change we make lightly," but the rapid shift in AI capabilities forced their hand. Previously, a massive PR implied that the person behind it put a lot of care into the code and is ready to "answer for the consequences." Now with AI, anyone can generate a PR without even understanding the bug fix or feature they want merged. The blog post goes on to say that the team is closing all open public pull requests immediately, and that maintainers will not treat external forks as a review queue for upstream Ladybird. Instead, the team wants outside contributors to focus on reporting bugs and running tests. Kling started Ladybird back in 2019 as LibHTML, a simple HTML viewer for his hobby operating system, SerenityOS, but by September 2022, it had turned into a full-fledged browser project. What sets Ladybird apart from the likes of Google Chrome, Apple Safari, or Mozilla Firefox is its totally independent engine, which does not rely on pre-existing codebases. The project maintains a strict policy against default search engine deals or user data monetization, keeping development funded entirely by donations and sponsorships. Generative AI is forcing open source project maintainers to rethink how they handle public code contributions (and the whole open-source thing in general). One month ago, a leak about the National Health Service (NHS) suggested the organization was planning to take all of its public repositories private ahead of a May 11 deadline, thanks to Mythos (an AI model that Anthropic believes is too dangerous to be released to the public) and its ability to find and write exploits for zero-day vulnerabilities. Thankfully, the Government Digital Service (GDS) issued a counter-report titled "AI, open code and vulnerability risk in the public sector" that stopped the shutdown by pointing out that hiding code does not improve security.
    • Kalmuri 4.2.4 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.4 changelog: Fixed an issue where color picking could occasionally freeze Improved capture stability Resolved a possible unexpected app shutdown in certain cases Refined internal handling for a smoother experience Download: Kalmuri 4.2.4 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.4 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I like the show more options. The only problem with it is that it's not always in a consistent spot in the menu. If the copy/paste/cut, happens to show on top, then more option is the last in the menu. But if copy/paste/cut happens to show on the bottom, then more options is before the copy/paste/cut. But I do like the more options because it hides the stuff that I rarely use. But I would like to choose what it is or isn't hiding. That would make it better.
    • I wonder if "put it back the way it was for decades" ever crossed their minds? 🤣
    • Rescind the stupid "Show more options" in context menus and just give us the full menu instead of adding more steps to get to what we want. The "simpler by default" makes me think they'll go in the opposite direction. Every context menu should have a configure button so you can pick and choose what options should be shown, I know you can do that with some registry fu but that shouldn't be required.
  • Recent Achievements

    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
    • Very Popular
      s0nic69 earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      476
    2. 2
      PsYcHoKiLLa
      253
    3. 3
      Skyfrog
      81
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!