Hard Disk's Click of Death?


Recommended Posts

Dear friends,

I'm writing this thread based on my long personal experience with HDDs failures, and after I saw much threads about that "Click of death" in neowin and other forums, and most members simply reply: Your HD is dead, get a replacement!

Most of us believe that the important thing in this case isn't the hardware, but the data on it, but in this guide, I'm listing ways to recover the data from those clicking drivers, even fixing it at home, using certain methods, and you get 100% working drive again for coming years!

IMPORTANT NOTE: In this guide, I'm assuming that clicking sound is happened suddenly, not after a physical shock to the drive, in 90% of such case "a shock", something is broken in the HDD, and it can't be repaired using this guide, only a special data recovery center may do it for you, for a bunches of $s.

Ok lets get started, let's list common causes for "HDD clicking sound":

- Bad power supply or power connector.

- Defected Motherboard.

- Defected HD's board (that green board on it's back.

1- Bad power connector

This is the most common case, the power cable that connect the drive to the power supply is defected, or the power supply itself is dying, simply, the best solution is to swap power connectors, or replace the power supply. Do not ever try to repair the power connector because you may cause further damages.

2- Defected Motherboard

This is rarely happen, but if your motherboard have some problems, it may lead to that clicking of HDD, and you wont be able to boot using that drive, the best solution is to put your drive in a friend's PC or something, if it works there, then it's your motherboard. and you need to replace it.

3- Defected HD's board

Actually, this is the main point that made me write such guide, in most cases, unreliable power supply or a case of sudden, the board of the HDD fails. AFAIK, it can't be repaired, so what can you do?

Simply, find a physically defected drive of the EXACT SAME MODEL of yours, and using a screwdriver, get the board out of that drive, and replace it in your drive, and enjoy your drive working perfectly again! I'm assuming that you can find that exact board somewhere (from a friend's damaged HD, repair shop... etc), if you can't find any, and you think that your data is so important, just buy a new EXACT SAME MODEL hard disk like yours, and do the job with the new board!

Ok we're done! I heard that for physically defected hard drives, you can get it to work again by putting it in a freezer for some time then connecting it, I can't confirm if this works or not, because I didn't try it personally, but I experienced all of the methods above, and remember, it's NOT for physically defected drives!

Cheers :)

Link to comment
https://www.neowin.net/forum/topic/258406-hard-disks-click-of-death/
Share on other sites

1- Bad power connector

This is the most common case, the power cable that connect the drive to the power supply is defected, or the power supply itself is dying, simply, the best solution is to swap power connectors, or replace the power supply. Do not ever try to repair the power connector because you may cause further damages.

with this though your machine would freeze because the alctual drive will be re-booting. Due to loss of power.

Never, EVER do what this kid did. It is so stupid it hurts. :no:

https://www.neowin.net/forum/index.php?showtopic=258035&hl=

585115992[/snapback]

IF, you meant by the kid is me, then you didn't understand a letter of my post because I never said open the HD! I said replace its board, which can be replaced easily without actually openning the drive!

IF, you meant by the kid is me, then you didn't understand a letter of my post  because I never said open the HD! I said replace its board, which can be replaced easily without actually openning the drive!

585116109[/snapback]

My post had absolutely nothing to do with you. I apologise if offence was taken. :)

1- Bad power connector

This is the most common case, the power cable that connect the drive to the power supply is defected, or the power supply itself is dying, simply, the best solution is to swap power connectors, or replace the power supply. Do not ever try to repair the power connector because you may cause further damages.

In my experience this is the most common also. I went thought two dodgy power supplies, replacing each when the HDD's would randomly wind down (click) while using my computer. I finally learnt a lesson and bought an antec true blue 480w. Hasn't happened since.

Ok we're done! I heard that for physically defected hard drives, you can get it to work again by putting it in a freezer for some time then connecting it, I can't confirm if this works or not, because I didn't try it personally, but I experienced all of the methods above, and remember, it's NOT for physically defected drives!

The freezer method DOES work, but once you do it, back up quickly because you don't get a second chance. My mate has used this method successfully numerous times on customers HDD's. :)

Cheers for the guide, a lot of people should be aware of this before giving up on their HDD's.

Nice Guide Tantawi,

Maybe you could include some images for people at what to look for with defective ribbons and power connectors (I remember seeing a few pictures of burnt out headers and tips about various programs on some sites), It also would be good to point out the fact that alot of these "ticks" are different .

there are certainly things like S.M.A.R.T and various drive tools to help you before the event occurs :yes: Prevention of data loss and proper back up methods are a big part of this ;)

(and for people with seagate drives many of them will actually make a beep when disconnected from the power.)

I think I have #3. I've heard my 4GB HDD on my old computer click annoyingly for around umm, three or four years. But it also could be #2, because I've had the motherboard for seven years, although I did clean it out. It couldn't be the PSU because I've just got a new one after the old one broke.

And by the way, although my sound does no harm, when it's swapping RAM, it clicks sooo much and is so annoying! I think I'll go crazy soon, but luckily, I'm getting anew computer, yay!

Nice list Tantawi :)

I'll just add a few more points of how important it is to backup the data as soon as possible.

I've had experience with at least 30 HD's so far, not all mine but friend's aswell.

Some hard drives make a certain single click noise when the PC boots up, no biggie. But if hear a new sound or repetitive clickings, that's certainly not good.

My advice, the first time you hear a click, drop everything and backup immediately, to another HD if possible because you never know the problem if exists can really detoriate rather quickly. First copy the most important files on the HD, then creating an Image of the drive is best or do a drive to drive copy to a new drive, so you don't have to go and re-install everything or risk chance of forgetting something. Do a HD scandisk full surface scan, if no bad sectors are found, yes it might be the power cable to the HD or a bad connection, unplug and re-plug all HD cables (that has actually helped once), or replace the cables. If all is good you can also defrag the drive so it won't work as hard.

If bad sectors are found and you hear more clicking, with a backup of the original drive on some other drive or media. Say you have a spare HD which you copied the image to (Symantec Ghost is very recommended though there are free utils), or drive down to the store and buy a new HD and make an image(or drive to drive copy), now consider sending the original drive to the manufacturer for a replacement, I mean why worry get nice new HD instead. You'll get a free(you pay to ship the drive) replacement if the drive is less than 3 years old, depending on the manf. of course. Goto their website and get an RMA, they'll give you all the info you need to know. Before sending out the drive, format and write 0's and 1's to the drive(special utils that actually erase the data for sure) . Many people actually think just format or fdisk erases the data for sure, not really.

Just a note to those newbies out there, never try to open the HD casing so the platter is revealed! First off , you void the warranty and If a single speck of dust lands on the platter, good luck and don't blow to get rid of it ;)

Dear friends,

I'm writing this thread based on my long personal experience with HDDs failures, and after I saw much threads about that "Click of death" in neowin and other forums, and most members simply reply: Your HD is dead, get a replacement!

Most of us believe that the important thing in this case isn't the hardware, but the data on it, but in this guide, I'm listing ways to recover the data from those clicking drivers, even fixing it at home, using certain methods, and you get 100% working drive again for coming years!

IMPORTANT NOTE: In this guide, I'm assuming that clicking sound is happened suddenly, not after a physical shock to the drive, in 90% of such case "a shock", something is broken in the HDD,? and it can't be repaired using this guide, only a special data recovery center may do it for you, for a bunches of $s.>

Ok lets get started, let's list common causes for "HDD clicking sound":

- Bad power supply or power connector.

- Defected Motherboard.

- Defected HD's board (that green board on it's back.>

1- Bad power connector>

This is the most common case, the power cable that connect the drive to the power supply is defected, or the power supply itself is dying, simply, the best solution is to swap power connectors, or replace the power supply. Do not ever try to repair the power connector because you may cause further damages.

2- Defected Motherboard>

This is rarely happen, but if your motherboard have some problems, it may lead to that clicking of HDD, and you wont be able to boot using that drive, the best solution is to put your drive in a friend's PC or something, if it works there, then it's your motherboard. and you need to replace it.

3- Defected HD's board>

Actually, this is the main point that made me write such guide, in most cases, unreliable power supply or a case of sudden, the board of the HDD fails. AFAIK, it can't be repaired, so what can you do?

Simply, find a physically defected drive of the EXACT SAME MODEL of yours, and using a screwdriver, get the board out of that drive, and replace it in your drive, and enjoy your drive working perfectly again! I'm assuming that you can find that exact board somewhere (from a friend's damaged HD, repair shop... etc), if you can't find any, and you think that your data is so important, just buy a new EXACT SAME MODEL hard disk like yours, and do the job with the new board!

Ok we're done! I heard that for physically defected hard drives, you can get it to work again by putting it in a freezer for some time then connecting it, I can't confirm if this works or not, because I didn't try it personally, but I experienced all of the methods above, and remember, it's NOT for physically defected drives!

Cheers:))

585115815[/snapback]

Edited by Techo

Am I the only one that hasn't had a HD go bad on me? Have a computer here that is probably 6 years old and it's still running on the original hd. I've been running a raid 0 setup using 2 fairly old hds, maybe 3-4 years, and they are still going strong. What causes the click of death? Frequent use? heat? excesive defrags and formats?

Hmm

Most of what you say is just common sense.

And as for opening up the actual HD, some HD manufacturers have special screws in which a normal PK or Phillips head will not fit. Is almost like a T6 screwdriver needed.

And some people may have old HD which may have to be acquired from ebay or alike if they were to switch boards.

Or even better, back up your data via DVDrom or even CD roms and also try Norton Ghost dos and use its high compression and burn to disks a image of the drive in question.

Maybe you shouldve mentioned that.

Well touch wood boys and girls, no sooner did I make this post then a cpl days later what do I hear one early morn.....the clicking of the HDD. My apologies too, I have heard this sound before when my last HDD died.

Now given that this is the 2nd hdd on its way to death in about a year, im inclined to believe its the motherboard or powersupply. Is there any specific way I can check this really? I suppose all I can do is change the power connector or supply, and if it still does it, assume its the motherboard?

I mean two in a year, from different manufactuers too, im inclined to believe its not the hdds themselves.

i had some clicking sound,only reason i had it before i replaced it was cuzz i kept hot swapping the drive out then on the 3rd time it screwed up,killed my 2000 partition and crippled my xp partition so out of 80GB i was left with 62GB and clicking sound,took it to a fellow i get stuff from and he said it's something wrong with the drive and maybe send it back(where i got it from i would have to travel 8 hours to get to where i got it and i don't even drive and i doubt there is still a warrenty on it)

reminds me of my maxtor 200gb drive that suddenly stopped working. no click, i had just plugged it into my xox, formatted it, and then locked disc, then it froze and the drive never worked again, just makes a odd beep(like in a video gameor something) i put it in the freezer but havent tried it again.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This is what I want. Hey Gemini, how do I remove you from all my google products permanently?
    • I would never install install this build before rtm process. only 3 months to go. never install on your daily devices. just wait 3 months.
    • Motrix Next 3.9.6 by Razvan Serea Motrix Next is a modern, open-source cross-platform download manager built as the official next-generation successor to the original Motrix project. It has been completely rewritten using Tauri 2, Vue 3, TypeScript, and Rust, while still relying on the powerful Aria2 download engine for high-speed multi-protocol transfers. The app supports HTTP, HTTPS, FTP, BitTorrent, ED2K and magnet links, offering advanced features like multi-connection acceleration, task scheduling, bandwidth control, and batch download management. With a significantly reduced install size (around 20MB), it focuses on being lightweight, fast, and resource-efficient compared to traditional Electron-based download tools. Designed for Windows, macOS, and Linux, Motrix Next delivers a clean, modern UI inspired by Material Design 3 principles, with smooth animations and a minimal workflow. It improves usability through better download organization, system tray integration, and enhanced torrent handling including selective file downloads and tracker management. Motrix Next features: Multi-protocol downloads — HTTP, FTP, BitTorrent, Magnet, .torrent, ED2K, and Metalink tasks BitTorrent — Selective file download, DHT, peer exchange, encryption controls, metadata caching, GeoIP peer flags, and tracker probing Browser extension integration — Embedded Extension API with independent authentication, download confirmation, smart auto-submit, filename hints, referer/cookie forwarding, and real-time controls (Chrome Web Store · Edge Add-ons) Safe filename handling — Content-Disposition, RFC 2047, non-UTF-8, percent-encoded, and extensionless URL resolution with path traversal sanitization Download organization — Favorite and recent folders, optional file-type categorization, stale-record cleanup, and completed history backed by SQLite Concurrent downloads — Independent controls for active tasks, HTTP connections per server, segments per file, and BT peer limits Speed control — Global and per-task upload/download limits with day-of-week and time-of-day scheduling System integration — Tray operation, optional tray speed display, macOS Dock badge/progress, protocol handlers for magnet://, thunder://, and motrixnext:// Lightweight mode — Destroys the WebView on minimize-to-tray while Rust keeps the engine, task monitor, notifications, history, and extension routing alive Notifications and power options — Native task start/complete/failure notifications, keep-awake during downloads, and optional shutdown after completion Network controls — Scoped proxy support for downloads, app updates, and tracker updates, plus system proxy detection Auto-update channels — Stable, Beta, and Latest Across Channels policies with separate download and install phases Diagnostics — Structured logs, exportable diagnostic ZIPs, database integrity checks, automatic DB rebuild, and Linux GPU rendering fallback Personalization — Light/dark/system theme, 10 color schemes, 26 languages, and first-launch system language detection Motrix Next 3.9.6 changelog: New Features Clipboard management — App-owned copy actions no longer trigger the Add Task auto-detect popup. aria2 input compatibility — Multi-line aria2-style task input is supported for URLs with per-task options such as out=. BitTorrent IPv6 DHT — Added IPv6 DHT support and related configuration. File category URL patterns — File category rules can match URL patterns with validation and localized hints. Task status tags — Added clearer waiting and sharing states for task cards. Download event bridge — Added an aria2 WebSocket event bridge for faster download notifications. Improvements Improved task list transitions and preserved task state during tab switches. Kept RPC origin access enabled for local integrations. Restored AppImage stripping in release builds after beta validation. Added localized preference guidance across supported languages. Download: Motrix Next 64-bit | ARM64 | macOS ~20.0 MB (Open Source) Links: Website | macOS / Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Segra 1.6.2 by Razvan Serea Segra is a free, open-source OBS-powered game recorder offering fast gameplay capture, instant clips, AI highlights, deep game integration, and seamless uploads—perfect for gamers, streamers, and content creators. Lightweight, fast, zero bloat. Segra key features: Automatic Game Recording: Begin capturing gameplay the moment your game launches, with zero manual setup. Instant Clipping: Save important moments instantly using a customizable hotkey—perfect for highlights, montages, or quick shares. Segra AI Highlights: Let Segra automatically detect kills, assists, deaths, and key events to generate polished highlight reels without manual editing. Gameplay Uploads: Upload recordings and clips directly to Segra.tv for fast sharing and cloud access. Deep Game Integration: Enjoy advanced game-data tracking across hundreds of supported titles, enabling smart highlight generation and stat-informed clipping. High-Performance Capture: Record up to 4K at 144 FPS using OBS-powered technology with minimal performance impact, supporting NVENC, AMD VCE, and custom quality controls. Segra Editor: Edit recordings easily with timeline controls, segment management, and event-based navigation to build the perfect clip. Customization Options: Adjust hotkeys, output formats, storage paths, codecs, capture quality, and performance settings for a tailored recording experience. Segra 1.6.2 changelog: UI: Improved the transition from the loading skeleton to the real content card. Security: Added Segra.dll code signing and automatic VirusTotal upload. Settings: Fixed the settings header to highlight Account when scrolled to the top. Recording: Updated OBSKit.NET to 1.4.1. Download: Segra 1.6.2 | 74.5 MB (Open Source) View: Segra Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hey Google, these are the Gemini features I want in 2026 by Aditya Tiwari Google Gemini has been around for over three years. The AI chatbot started its journey back in 2023 (as Bard) when ChatGPT was already a talk of the town. However, it quickly attracted criticism after misrepresenting facts about the James Webb Space Telescope. The search giant spent a year fine-tuning Bard before rebranding the chatbot and its underlying generative AI model to Gemini, drawing inspiration from NASA's first human spaceflight program. Note that Bard was initially powered by LaMDA and PaLM 2; Google has since added several new features and integrations to Gemini. That said, there is scope for improvement and a gap for new features. I have been using Gemini for a while now and have realized that the chatbot lacks several features, making it harder for me to research across topics. These are mostly function-over-form updates that can improve the overall experience. Delete individual messages from a conversation Image via DepositPhotos.com One good thing about Gemini is that it can maintain context throughout the conversation. But things might get chaotic when you want to ask a related question, but don't want it to be part of your conversation in the long run. You can't ask that related question in a fresh chat because Gemini will lose the active conversation context of what you're trying to research. If Google allowed you to delete individual question/answer pairs, you could simply ask about a sub-topic and remove it from the conversation to create a smooth flow of important stuff. Offline mode Image via DepositPhotos.com A big pain of using Gemini daily is that everything loads from the cloud. It takes time for your chats to appear, and you can't view your conversation history while offline. To get a better idea, you can open the Gemini app and see how it looks without an internet connection. While Gemini models run in the cloud, it wouldn't hurt if Google could store chats (at least the text part) on the device so we can refer to them when offline. Google can also offer a lightweight version of its AI model to help with basic drafting, summarization, and other tasks. It has the Gemini Nano model, which can perform on-device processing on Google Pixel, Samsung, and some other Android brands, but it's a system feature and not related to the cloud-based Gemini app. Make temporary chats permanent I can't thank Google enough for taking the time and effort to add incognito mode or temporary chat mode to the Gemini app. It lets you have conversations without worrying that the topics will end up in your chat history or used for model training (at least on paper). Google claims that it doesn't use your temporary chats to "personalize your Gemini experience or train Google’s AI models." However, the data is stored "up to 72 hours to respond to you and to process any feedback you choose to provide." That said, I often start researching something in a temporary chat, only to realize the chatbot's answer is good enough to refer to later. Sadly, Gemini doesn't have an option to make such temporary chats permanent. In other words, I won't be able to follow up on it if I close the temporary chat. I'm left with alternatives like copying the answers into notes or another app. My digital life will get a lot better if Gemini gets a button to make temporary chats permanent. Collapse answers for a cleaner view You're heavily invested in your research game and suddenly feel the need to go up in the chat to recall something. This is when the conversation thread starts to feel like an overwhelming, unending wall of questions and answers. What if Google added a way to collapse Q&A pairs in the Gemini chat thread? It would look quite clean and easy to navigate. You'll quickly get an overview of everything you have discussed with the chatbot. Add buttons to jump between messages Suggested mockup of the feature. This reminds me of a small but useful Gemini feature that Google could add to its chatbot: the ability to hop between prompts in a conversation. Just add simple up- and down-arrow buttons, similar to YouTube Shorts, so people can quickly scroll through the messages. A table of contents or Chat Overview It's hard to get a bird's-eye view of everything you have discussed with the chatbot during a lengthy conversation. This is where a table of contents, or Chat Overview, displayed at the top of the screen, possibly in a drop-down button, might come in handy. You'll be able to get an overview of the chat and jump between messages, serving as an alternative to the up/down arrow buttons. Temporary mode for Gemini Live Image: Google You can use Gemini Live to have real-time conversations with the chatbot, which feels like you're talking to someone in the same room. However, a downside is that Gemini Live doesn't work in Temporary Chat mode, so all your conversations end up in the chat history. Google should consider expanding the temporary chat mode to include Gemini Live. Default to a specific chat One thing that feels somewhat annoying to me is that Gemini always opens in a new chat, whether on web or mobile. Sometimes, you want to return to your last chat. Google can take cues from web browsers, which let you choose whether you want to go to a new tab or a specific web page(s). Gemini can also have options to default to a specific chat when reopened. That said, generative AI chatbots have endless possibilities given the vagueness of their work. You can mold them the way you want by attaching different connectors, adding custom instructions, and including source files. It remains to be seen what Google has in store for future updates and whether anything from this wishlist gets the green light. The search giant released a stream of new Gemini updates in recent months, including Gemini 3.5 Flash and Gemini Omni Spark, adding that it now has 13 products with more than a billion users each. What do you want to see in the Gemini app? Tell us in the comments.
  • Recent Achievements

    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      181
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!