Hewlett Packard CD Writer Driver


Recommended Posts

I recently upgraded to Win 2K from 98 on one of the desktops I have at home. This desktop has a CD Writer Plus 9100 series. The cd that came along only has drivers for Win 98. Can someone tell me where to find the Win 2k one? I looked at HP's site, but it looked like you had to pay for the driver cd. Is there any place else? Thanks

Link to comment
https://www.neowin.net/forum/topic/26705-hewlett-packard-cd-writer-driver/
Share on other sites

Originally posted by khnXP

I recently upgraded to Win 2K from 98 on one of the desktops I have at home. This desktop has a CD Writer Plus 9100 series. The cd that came along only has drivers for Win 98. Can someone tell me where to find the Win 2k one? I looked at HP's site, but it looked like you had to pay for the driver cd. Is there any place else? Thanks

my bro doesn't like XP on his desktop. Besides it would run slowly on that system.

You don't need drivers. I have a HP 9100 series and never needed drivers for Win2K. I recently upgraded that box to WinXP and still didn't need any drivers. The drivers are included in the OSes. Well Win2K and WinXP that is.

Here is the driver info provided by WinXP and is basically the same in Win2K:

Driver Provider: Microsoft

Driver Date: 7/1/2001

Driver Version: 5.1.2535.0

Digital Signer: Microsoft WindowsXP Publisher

Now if your talking about the aspi layer then that's different. You'll need to go to Adaptec's site for more info but if you install some of the more popular CD burner apps they have the aspi files needed.

every cd-rom, cdrw and i think dvd-roms too, use the same drivers

i got a cd writer 8100 in my old hp machine and it won't work with nero :s

when i tell it to burn all the time it says "can't perform fixation"

what does that mean

nekrosoft13: Fixation is when the lead in and lead out tracks or also known as T.O.C. (table of contents) are written to the disc. More specifically the Fixation is when you can append a CD, Finalization is when the CD is closed after the burn. A Fixation or Calibration error however is usually caused by poorly made CDRs.

Actually Google is a wonderful thing...

http://www.ntius.com/support/faq/faq_answer.cfm?QID=34

http://www.ahead.de/en/helptool/530.htm#o530

Hope that helps :D

Originally posted by KaosAD

nekrosoft13: Fixation is when the lead in and lead out tracks or also known as T.O.C. (table of contents) are written to the disc. More specifically the Fixation is when you can append a CD, Finalization is when the CD is closed after the burn. A Fixation or Calibration error however is usually caused by poorly made CDRs.

Actually Google is a wonderful thing...

http://www.ntius.com/support/faq/faq_answer.cfm?QID=34

http://www.ahead.de/en/helptool/530.htm#o530

Hope that helps :D

thanks man

it could be the cd, i was trying to burn a memorex cd-rw. i will try some cd-r maybe later

i hope it will work

drivers are installed with the OS, just like everyone else says. But personally, I think that HP doesn't make quality burners. I had one and it performed like crap. I moved up to my TDK and works great. But yeah, the only thing you need to get is your aspi layer. and nekrosoft, i really would consider using some other media than memorex.

say it with me: " MEMOREX = CRAP ! "

liar2 ---- 95% of time i use Verbatin, i just have 4 or 5 memorex cd-rw.

and i agree with you hp burner are not that good, first of all my hp burner is limited to 74 min, i can't burn 80 min. i did not try in windows xp yet, but in 98 it could only burn 74min.

I use up all 700mb with my HP 9100 in both Win2K and WinXP. Don't be so quick to snuff Memorex. I have had crap from them, TDK, Verbatim, Imation, etc. It doesn't work like that. Most of these guys don't make their own cds. There are about 250 brands of CDR media and only 16 manufactuers like Richo and Ritech. Chances are if you got a hold of some bad CDRs and switch brands you could wind up with the same problem.

Here's a little info that may help shed some light on the subject..

CDR Factories and Manufacturers

Originally posted by KaosAD

I use up all 700mb with my HP 9100 in both Win2K and WinXP. Don't be so quick to snuff Memorex. I have had crap from them, TDK, Verbatim, Imation, etc. It doesn't work like that. Most of these guys don't make their own cds. There are about 250 brands of CDR media and only 16 manufactuers like Richo and Ritech. Chances are if you got a hold of some bad CDRs and switch brands you could wind up with the same problem.

Here's a little info that may help shed some light on the subject..

CDR Factories and Manufacturers

i know about all the brands and factories

the varbatins i use, all of them are made by mitsubishi

i'm not saying that TDK is the best. I know for a fact that they aren't. I've tried many different brands of CD-R media and I've found that some do work better than others. And really, I'm not even using TDK media. But everytime that I've tried to use memorex, i've ended up with a coaster.

Hate to burst your bubble, Mitsubishi may supply them the majority of the CDRs but they are like anyone else. When their purchasers get a good deal from another supplier they run with it. Not one of these manufacturers use the same supplier 100% of the time, it's called smart business.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Louis Rossmann suing Samsung over "990 Pro SSD warranty scam" by Sayan Sen Back in 2023, if you recall, Neowin reviewer Robbie Khan had a dispute with Samsung over his 990 Pro SSD, which was rapidly losing its health. After significant back and forth, the tech giant had finally released firmware to "stop" the issue. Interestingly, its previous flagship at the time, the 980 Pro was also facing problems leading to two consecutive sets of firmware fixes. Three years later, it looks like a similar conflict has now broken out between tech repair entrepreneur YouTuber Louis Rossmann and Samsung, as it has escalated into a threatened lawsuit after the company allegedly refused to appropriately replace a failing 990 Pro SSD that remained under warranty. According to Rossmann, a 4TB Samsung 990 Pro NVMe SSD purchased for approximately $330 less than two years ago, began experiencing major hiccups and issues, even though he claims it had been operated under ideal cooling conditions. It was installed in a RAID 1 array and cooled by a heatsink and dual high-speed fans. However the drive reportedly started dropping out of the array, exhibiting controller-level failures that eventually became not useable in any meaningful way. Rossmann said Samsung’s support process was marked by delays and confusion from the very start. After initially contacting the wrong regional support channel, he was redirected to Samsung’s memory support division where he submitted detailed diagnostics, logs, and proof of purchase. Rossmann runs a repair company and owns an ACE Lab PC-3000 machine, which is a professional-grade data recovery equipment. As such, he had been confident in his diagnostics. Samsung even seemingly acknowledged that later. Regardless, Rossmann claims that his initial support ticket was automatically closed before a full 24-hour response window had elapsed, forcing him to reopen the case and resubmit documentation. The controversy however intensified further from here after Samsung accepted the drive for warranty evaluation but later returned it with a repair report stating that the drive had passed its testing and that the SSD had been verified as functional. Rossmann strongly disputed those claims citing that his own independent testing on PC-3000 showed write speeds reducing to as low as 40–60 MB/s before the drive failed entirely. Samsung subsequently informed him that the SSD had been reset and reflashed, passing internal stress tests. However, the company also stated that replacement units were unavailable due to an industry-wide memory shortage and suggested that a refund process could be initiated if further testing confirmed the fault. Thus, to settle, the company offered a refund of $330, the amount that was initially paid by him to make the purchase. Here, Rossmann pointed out the seeming hypocrisy of the tech giant as in how no Samsung drive was apparently allocated for warranty replacements, but they were abundantly available for retail sales especially when using business accounts. As you can see, Rossmann is indeed right, there are Samsung 990 Pro 4TB SSDs on Amazon currently for $950 (shipped and sold by first-party Amazon US itself), and they are also available on Samsung's own store too, albeit for an even higher price of $1100. Thus Rossmann argues that Samsung’s inability or unwillingness to provide a replacement while the same model remains available for purchase at significantly higher market prices reflects a failure to honor its warranty obligations. He has issued a formal 60-day notice and says he intends to file suit in Texas small claims court, asserting that companies should face greater costs for denying legitimate warranty claims than for fulfilling them. You can check out the full video titled "Samsung's 990 Pro SSD warranty policy is a scam; I'm taking them to court," at the link below. Source and image: Louis Rossmann (YouTube) As an Amazon Associate we earn from qualifying purchases
    • Was it too much to ask to show the icon in this article?
    • Frankly, I blame whoever is writing such articles. "A big improvement/update and/or new feature is now available to everyone! Also, use this unofficial tweak tool to enable it because it actually isn't available to you yet officially and might not in fact even be entirely ready or whatever, hence why it is perhaps not enabled for you*. But it's great and you should enable it!" I mean there's nothing wrong with sharing info about some feature you might need to enable via unofficial means, of course. It's just that these articles tend to essentially end up being two news pieces in one, and one of them tends to be a bit misleading. (*Yes, yes, the "it's a controlled rollout!" thing. Not a fan of that one either. The argument, not the actual rollout.)
    • Thank you. Will do. I read in the release notes that editor config might be at play here.
    • Actually, I think even Microsoft doesn't know how to control it
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      185
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!