Looking for a good server distro


Recommended Posts

I'm getting ready to update my server (uses: vbulletin, mysql, php, perl). I have Redhat on it now but since they got into Fedora, I don't think I want to use that in my server.... any suggestions? I'm looking for something easy to maintain but strong in security. Thanks.

Link to comment
https://www.neowin.net/forum/topic/269495-looking-for-a-good-server-distro/
Share on other sites

I'm no Linux guru but Mandrake and Suse have always been great to me. They've got nice administration tools built in and they run rock solid.

That's just me though. I use them as a compliment to many networks. I like Mandrake for schools because it looks nice and friendly for others to use. I use Squid Proxy most times on Mandrake. Nice app!

I still want to try out Gentoo but haven't had time yet.

Either of the following would be good to use imo.

1) FreeBSD

2) Debian

3) SuSE

I never really messed around with BSD but from user-feedback and articles that I've been reading, it's obvious that BSD is the most secure thing to run on a server.

Debian is great cause of Apt. It has packages in the stable and testing mirrors that are 99.9% sure to work and you'll have strictly what you need. You install the base system and install anything afterwards with apt-get.

SuSE, well, it has a pretty installation that people enjoy looking at and it works. It's easy to setup and YaST isn't bad at all. Just make sure that the rpm's that you will be using will install on SuSE (sometimes they can be distro-specific if not mistaken).

But as far as linux distributions go, you could pretty much use almost anything as long as the package managment tool that it provides is reliable (don't need one but it sure makes life easy for admins). Apt and Portage are the two systems that I'd say are reliable as far as linux goes.

Well I used to be a UNIX guy, then a couple of years ago I was a BSD guy and now I'm a Linux guy. I've ran all kinds of servers. FreeBSD is a really fine OS for a server. There are things that are different in BSD than Linux, but its easy to distinguish. Oh yeah and I used to pretty much have to compile everything on my BSD server, but that was a couple of years ago.

Thanks all for the advise. I'm not really not a fan of compiling my own packages but I may be willing to do that if there is no other choice. It would really be nice for some of these packages to make it easier to install and upgrade. I think it would really bring Linux more into the mainstream (desktop). It would also be nice to get a distro that would keep up to date with tech instead of having to upgrade all the time to the newest version of things (or at least semi new).

It would really be nice for some of these packages to make it easier to install and upgrade. I think it would really bring Linux more into the mainstream (desktop). It would also be nice to get a distro that would keep up to date with tech instead of having to upgrade all the time to the newest version of things (or at least semi new).

585273046[/snapback]

:blink:

Odd, but I think Linux does an excellent job of what you describe. Especially when you compare it to the 'other' significant OS that is in the market. ;)

Thanks all for the advise. I'm not really not a fan of compiling my own packages but I may be willing to do that if there is no other choice. It would really be nice for some of these packages to make it easier to install and upgrade. I think it would really bring Linux more into the mainstream (desktop). It would also be nice to get a distro that would keep up to date with tech instead of having to upgrade all the time to the newest version of things (or at least semi new).

585273046[/snapback]

Most distros come with package managers that already make it easier to install. One of the most popular is APT-get for Debian.

You type apt-get install <program> and it searches the APT repositories online, finds it, downloads and then installs it for you. That's it. Type apt-get upgrade and it will search through your apps and update them (I believe it uses the RPM database on all distros that use apt-get/apt-get port. Type apt-get dist-upgrade and it will upgrade everything else including your distribution's core files.

Some other distros have Apt-get as well with their own APT repositories for that distribution, such as Fedora Core 2 and 3.

Windows isn't even that easy.

You have YUM as well, or even just normal RPM installation and a bunch of other package managers.

Any linux distro will most likely fit your needs for a server. It doesn't make much difference. Its all about freedom and choice.

I'm surprised nobody mentioned: White Box. Its just RedHat Enterprise Linux recompiled without RedHat's trademarks.

I'm surprised nobody mentioned: White Box. Its just RedHat Enterprise Linux recompiled without RedHat's trademarks.

585273277[/snapback]

But, doesn't that make it not Open Source? :rofl:

(sorry, inside joke...) ;)

Back on-topic: That is probably the best solution for handling enterprise types of apps. I think almost any flavor of Linux will work well, or the BSD option may be a worthy platform to build from, too! :yes:

But, doesn't that make it not Open Source? :rofl:

(sorry, inside joke...)  ;)

Back on-topic:  That is probably the best solution for handling enterprise types of apps.  I think almost any flavor of Linux will work well, or the BSD option may be a worthy platform to build from, too! :yes:

585273398[/snapback]

hahahaha. Yeah it doesn't matter that the source is open, because it isn't open source!

-

BSD is always a good option, especially being arguably the most secure OS on the planet.

Thanks.. I have never been able to install any BSD or Debian on my test server both had hardware incompatibilities, I believe. Although, I'm sure they would have no issues on the server but I'm not installing any server solution that I can't have on my test server. I never had any issues installing any RedHat product. I'll have to check out Whitebox, Thanks.

Most distros come with package managers that already make it easier to install. One of the most popular is APT-get for Debian.

You type apt-get install <program> and it searches the APT repositories online, finds it, downloads and then installs it for you. That's it. Type apt-get upgrade and it will search through your apps and update them (I believe it uses the RPM database on all distros that use apt-get/apt-get port. Type apt-get dist-upgrade and it will upgrade everything else including your distribution's core files.

Some other distros have Apt-get as well with their own APT repositories for that distribution, such as Fedora Core 2 and 3.

Windows isn't even that easy.

You have YUM as well, or even just normal RPM installation and a bunch of other package managers.

Any linux distro will most likely fit your needs for a server. It doesn't make much difference. Its all about freedom and choice.

I'm surprised nobody mentioned: White Box. Its just RedHat Enterprise Linux recompiled without RedHat's trademarks.

585273277[/snapback]

I'm partial to FreeBSD :-)

The main reason I like it is because it's easy to administer, and it's stable. Ports allows you to compile from source (more versatile than using binaries) while still making updating your software an easy process. The stability means that I rarely have to do anything at all once the server is up and running. Just a few updates here and there and watch the uptime. I guess I'm lazy :p

Arch linux, I'm not convinced. I use it on my desktop and it's not as stable as FreeBSD. Things tend to break too often when updating the OS. It's nice to have a workstation with the latest and greatest, but one wouldn't do the same for a server. And arch tends to be a distro that lives on the bleeding edge. Using arch is kind of like using FreeBSD-CURRENT (you'd want to use FreeBSD-STABLE for your server). I'm not saying that you can't make an arch box stable. It's just that it seems to take more work to achieve that.

Thanks.. I have never been able to install any BSD or Debian on my test server both had hardware incompatibilities, I believe. Although, I'm sure they would have no issues on the server but I'm not installing any server solution that I can't have on my test server. I never had any issues installing any RedHat product. I'll have to check out Whitebox, Thanks.

585273559[/snapback]

Debian "stable" tends to use two year old kernels for those that want something that has been tested under every possible condition. It is very conservative. A bit too conservative for my tastes.

Debian "testing" (i.e. Sarge) uses still a somewhat older kernel but it has far better hardware support than "stable". Personally, I'd consider Debian "testing" to use as a server for most operations.

Debian also has an "unstable" branch that is good for desktop use. I even find that to be rather stable but it's probably too cutting edge for something important.

If you use a debian based distro, I would go with Ubuntu. My company currently uses Ubuntu on most of our servers. The packages in the Ubuntu repository seem better and it is a little bit easier I think. The plus side of Ubuntu is that it has great auto detection of hardware and best of all, it's debian based.

If you use a debian based distro, I would go with Ubuntu.? My company currently uses Ubuntu on most of our servers.? The packages in the Ubuntu repository seem better and it is a little bit easier I think.? The plus side of Ubuntu is that it has great auto detection of hardware and best of all, it's debian based.

585283461[/snapback]

It's also from the unstable branch. Much like Knoppix, Mepis and the other Debian children.

Ubuntu is Debian. You can use whatever repositories you want. They are usually just mirrors of one another anyway. You can configure Debian to look like Ubuntu and you can configure Ubuntu to look like Debian. It's just a matter of apt-get installing a few packages or apt-get removing a few packages.

Edit:

I know this is an old post (it came up on a Google search) but now that Ubuntu uses Hoary you can't necessarily use non-Ubuntu repositories. Earlier versions of Ubuntu (that used xfree86 rather than x.org) weren't as picky.

Edited by fred666
I'm no Linux guru but Mandrake and Suse have always been great to me.  They've got nice administration tools built in and they run rock solid.

That's just me though.  I use them as a compliment to many networks.  I like Mandrake for schools because it looks nice and friendly for others to use.  I use Squid Proxy most times on Mandrake.  Nice app!

I still want to try out Gentoo but haven't had time yet.

585268351[/snapback]

Mandrake is one of the worst OS's for Server use. Its insecure and horrible.

Just my opinion.

However i have to say Redhat enterprise is good for production use, as it has a large support medium.

However, there are other distros such as freebsd and debian which are great for production use.

For a server? I'd go with debian or slackware, or even ditch linux and go with FreeBSD.

585268720[/snapback]

Good choices. I'm using Slackware at the moment. I started not to long ago using the distro, and its pretty easy to configure and to use.

Mandrake is one of the worst OS's for Server use. Its insecure and horrible.

Just my opinion.

However i have to say Redhat enterprise is good for production use, as it has a large support medium.

However, there are other distros such as freebsd and debian which are great for production use.

585300488[/snapback]

Mandrake is geared towards the desktop user and its not really insecure, no more than most distros. I wouldn't personally use Mandrake for a server. Many people use Fedora as a server distro all though its geared towards the desktop just like Mandrake.

Which sense this is a sticky I'll mention Fedora is a more bleeding edge distro than most. And it tries to be. That's good for the desktop market, not for the server market, because the apps aren't as thoroughly tested. I haven't ran into many instability issues though, but I've seen people who have from FC1 - 3.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Dopamine 3.0.6 by Razvan Serea Dopamine is an awesome free audio player which tries to make organizing and listening to music as simple and pretty as possible. Dopamine has been designed for Windows 7, Windows 8.x and Windows 10 and plays mp3, ogg vorbis, flac, wma and m4a/aac music formats quite well. The best part? It's created by long-time Neowin member, Raphaël Godart. If you’re looking for a music player to handle a large music collection, you should definitely give Dopamine a try. Dopamine 3.0.6 changelog: Fixed Manually edited album covers are overwritten on the next collection refresh Fixed AppImage package not working on modern GNU/Linux distributions Deleting song from playlist sometimes fails Playback controls only work when clicking on upper half of the buttons It's unclear that files must be tagged with an external ReplayGain scanner (for example rsgain) before normalization can take effect. Change to Artist or Album tags is not reflected in the song list view nor in the Now Playing information ReplayGain issues Smart playlist filters ignore text containing accents or other special characters Some MP3 files trigger an "MPEG header not found" error due to a too-narrow initial MPEG header scan range Changed Updated the Vietnamese translation Download: Dopamine 3.0.6 | 122.0 MB (Open Source) Links: Home Page | Forum Discussion | Screenshot | Other OSes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • BleachBit 6.0.1 Beta by Razvan Serea When your computer is getting full, BleachBit quickly frees disk space. When your information is only your business, BleachBit guards your privacy. With BleachBit you can free cache, delete cookies, clear Internet history, shred temporary files, delete logs, and discard junk you didn't know was there. Designed for Linux and Windows systems, it wipes clean thousands of applications including Firefox, Microsoft Edge, Google Chrome, Opera, Safari, and more. Beyond simply deleting files, BleachBit includes advanced features such as shredding files to prevent recovery, wiping free disk space to hide traces of files deleted by other applications, and vacuuming Firefox to make it faster. Better than free, BleachBit is open source. BleachBit has many useful features: Delete your private files so completely that "even God can't read them" according to South Carolina Representative Trey Gowdy. Simple operation: read the descriptions, check the boxes you want, click preview, and click delete. Multi-platform: Linux and Windows Free of charge and no money trail Free to share, learn, and modify (open source) No adware, spyware, malware, browser toolbars, or "value-added software" Translated to 64 languages besides American English Shred files to hide their contents and prevent data recovery Shred any file (such as a spreadsheet on your desktop) Overwrite free disk space to hide previously deleted files Portable app for Windows: run without installation Command line interface for scripting and automation CleanerML allows anyone to write a new cleaner using XML Automatically import and update winapp2.ini cleaner files (a separate download) giving Windows users access to 2500+ additional cleaners Frequent software updates with new features Going beyond standard deletion of files, BleachBit has several advanced cleaners: Clear the memory and swap on Linux Delete broken shortcuts on Linux Delete the Firefox URL history without deleting the whole file—with optional shredding Delete Linux localizations: delete languages you don't use. More powerful than localepurge and available on more Linux distributions. Clean APT for Debian, Ubuntu, Kubuntu, Xubuntu, and Linux Mint Find widely-scattered junk such as Thumbs.db and .DS_Store files. Execute yum clean for CentOS, Fedora, and Red Hat to remove cached package data Delete Windows registry keys—often where MRU (most recently used) lists are stored Delete the OpenOffice.org recent documents list without deleting the whole Common.xcu file Overwrite free disk space to hide previously files Vacuum Firefox, Google Chrome, Liferea, Thunderbird, and Yum databases: shrink files without removing data to save space and improve speed Surgically remove private information from .ini and JSON configuration files and SQLite3 databases without deleting the whole file Overwrite data in SQLite3 before deleting it to prevent recovery (optional) BleachBit 6.0.1 Beta release notes: BleachBit 6.0.1 beta is now available for testing. This maintenance-focused release includes bug fixes, updated translations, and a range of safe enhancements. This release fixes a Windows security issue that could allow arbitrary file deletion during privileged cleaning (reported by Zeze with TeamT5). It also adds new cleaners (including a DNS cache cleaner, Claude Code, and Visual Studio Code forks), support for multiple Chrome and Edge profiles, new deep scan options for developer directories like node_modules and venv, and safer, faster file shredding. All Platforms Added cleaners for Claude Code, DNS cache, and many Visual Studio Code forks. Added support for multiple Chrome and Edge profiles. Chrome can now clean downloaded AI models. Deep Scan can optionally remove venv, __pycache__, node_modules, and .angular directories. Deep Scan is faster by skipping directories on the keep list. File shredding is safer, faster, and leaves fewer recoverable traces. Improved handling of cookies, symlinks, Unicode filenames, external processes, and configuration files. Improved Expert Mode warnings and long warning dialogs. Fixed crashes related to cleaner detection, invalid Unicode, and malformed cleaner data. Clipboard is now cleared automatically after shredding files via paste operations. Linux Added AppImage support. Added cleaners for Visual Studio Code, Codeium, Librewolf (.deb), Transmission (Flatpak), and Profanity. Improved Linux trash detection, including Snap-installed applications and mounted drives. Fixed Wayland root CLI issues and several Snap-related problems. Improved package dependencies, AppStream metadata, and desktop file handling. Fixed startup crashes when Python Requests is unavailable. Windows Fixed a security vulnerability that could allow arbitrary file deletion when cleaning with elevated privileges. Added %WindowsSystem% variable support. Improved clipboard clearing using native Windows APIs. Improved installer experience on unsupported Windows versions. Reduced installer size and improved application robustness. Fixed Unicode handling, filename anonymization, Git revision reporting, and splash screen stability. [full release notes] Download: BleachBit 6.0 | Portable | ~20.0 MB (Open Source) View: BleachBit Home page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DriversCloud 12.1.6 by Razvan Serea With DriversCloud (formerly My-Config.com), you can explore your computer easily, safely and free. The application quickly scans your PC and identifies the hardware and software components. DriversCloud then establishes a list of the different drivers compatible with your OS and hardware. Download the drivers needed for the proper functioning of your computer. To detect your drivers, DriversCloud also displays a detailed summary of your hardware and software configuration, analyzes your BSOD, monitors in real-time your PC voltages and temperatures and lets you share your configuration online. Once the hardware components have been detected, you will be able to obtain with just a few clicks the latest drivers corresponding to the identified hardware. You can record your configuration on the site for free, and can get the corresponding URL to post the configuration to technical forums, e-mail and social networks. You can also download the detection result (the configuration) as a PDF file. To protect the user's privacy and data confidentiality, a 4-level confidentiality system was created that filters the XML marks and gives control to the user. The default level can be modified in the preferences. Using the maximum level will prevent the user from publishing his configuration and generating a corresponding PDF file. In non-connected mode, each XML configuration is stored on the server for one day (for practical reasons). However, you are given the opportunity to manually delete it. Created in 2004, and continually improved, My-Config.com has established itself on the web as a free service to PC users running Windows and Linux operating systems. The service is designed to work with the most common Internet browsers (Edge, Firefox, Chrome, Safari). Download: DriversCloud 64-bit | 20.0 MB (Freeware) Download: DriversCloud 32-bit | 18.9 MB Link: DriversCloud Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      193
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      96
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!