Recommended Posts

I was traveling in Peru for the past 2 weeks and had my Ipod with me. For some reason when I got into higher altitudes like 8000 to 10000 feet the ipod would not be able to find songs on the hard disk. You could hear the hard disk spining but it would just freeze up sooner later. Once I got up to about 13000 feet in Puno the Ipod just wouldnt boot up at all. Has anyone had any problems with the Ipod at high altitudes? The Ipod works fine now back at home. And it worked fine the second the plane took off once the cabin pressurized. By the way I have the 60gb Ipod photo, and I also brought a sony vaio laptop with me that worked perfectly fine the whole time.

Link to comment
https://www.neowin.net/forum/topic/270447-ipod-and-peru/
Share on other sites

Environmental requirements

* Operating temperature: 32? to 95? F (0? to 35? C)

* Non operating temperature: -4? to 113? F (-20? to 45? C)

* Relative humidity: 5% to 95% non-condensing

* Maximum operating altitude: 10,000 feet (3000 m)

on the apple site

well i was up 36,000 feet in a plan and it worked....maybe because i was in a different environment

Link to comment
https://www.neowin.net/forum/topic/270447-ipod-and-peru/#findComment-585280654
Share on other sites

This is what I got from another forum

This is from the IBM support site:

The Microdrive does need "AIR" to float the heads and typically above 10,000 ft the mass of the air is too low and the drive requires a pressurized environment similar to an aircraft or spacecraft. At high altitude the air bearings begin to loose support from the air molecules needed to provide the "air bearing" for the Negative Air Bearing Surface (NABS) design of the head. If this "air bearing" is removed or lowered (as is the case with low density air at high altitudes) the head damages the media and you could have loss of data. The drive is vented to maintain equal pressure inside and outside to provide the air and to maintain the same pressure. This eliminates the need for sealed and rigid covers that can tolerate pressure differences.

The OEM Functional specification defines the warranty range for operating altitude as 3,000 M or 9,000 ft (3ft/M). If the customer is mountain climbing with a GPS or digital camera above 9,000 ft the drive might have problems. (Mt Fuji ~ +13,000ft, Mt Raineer ~ +14,000 ft). Please note, this is the operating environment. Non operation at high altitudes, including vacuum, have no ill effects on the microdrive. Within passenger aircraft, the cabin is pressurized to 9-10,000 feet hence the drive would experience no difficulty operating in an aircraft cruising at 35-45,000 ft !

Link to comment
https://www.neowin.net/forum/topic/270447-ipod-and-peru/#findComment-585280738
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It is silly there is no simple way to check whether this profile has been activated. CFRs are normal, but trying to even hide the fact if it's on / off seems silly, especially for something so user-facing. Surely Microsoft is "proud" of their engineering efforts on this one and ought to display it somwhere in the GUI.
    • Many Linux distros are not known for excellent battery life, so I'm not sure that is the best example. A more apt example may be Apple, but Apple's CPUs are simply far more efficient than Intel & AMD at single-threaded tasks like these, so "boosting" is not as power-hungry and less heat-inducing. Not to mention Apple will hardly engage P-cores for basic UI tasks; they use a pretty complicated QoS scheme to only activate P-cores for more serious workloads like HTML / JS execution or decompression or application launch. Microsoft is (smartly) doing it for launch, but also for UI tasks, which is the more nonsensical part: why ... do Windows 11's UIs need modern CPUs to boost? It should load so quickly that there's not even time for the CPU to boost.
    • I've not seen any controlled testing and, judging by Microsoft's mentality, within a year, they'll have added so much more bloat, it'll undo any perceptible latency benefit and we'll have boosted the CPU clocks for nothing.
    • It depends: heat soak is a thing. Initially on cold boot-up, the heatsinks & heatpipes are at ambient temp. After heatsinks & heatpipes warm up (through normal usage), they don't immediately cool to ambient temp when the load goes away. So their baseline is higher and the trigger point for fans is much less stress. Add a few more CPU spikes → it's too hot to stay at the same fan RPM → fans get triggered to start up up much sooner / get triggered to ramp much more quickly.
    • Can LibreOffice just shut up and worry about themselves and stop comparing themselves? Do we see Microsoft complaining about euro office?
  • Recent Achievements

    • One Year In
      slackerzz earned a badge
      One Year In
    • One Year In
      highriskpaym earned a badge
      One Year In
    • One Month Later
      highriskpaym earned a badge
      One Month Later
    • Week One Done
      highriskpaym earned a badge
      Week One Done
    • Week One Done
      FBSPL earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      501
    2. 2
      PsYcHoKiLLa
      198
    3. 3
      +Edouard
      156
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      71
  • Tell a friend

    Love Neowin? Tell a friend!