Recommended Posts

Hi

Just after a quick bit of help. I've been given a Compaq Armada M300. Its a P3 somthing or other, only problem is there is a bios start up password, which means its pretty much useless (hence why it was given).

I've tried searching round the net and the only thing i've come up with it removing the bios battery and shorting the 2 pins; which didn't work. I've also seen on some toshibas it can be done by shorting various pins on the parallell port, but found northing for the compaq. So if anyone have any ideas, I'd be most greatful :)

Cheers

Huw

Link to comment
https://www.neowin.net/forum/topic/270482-bios-password/
Share on other sites

Taken from another forum.

I know that this will work with a M300 because I have done it successfuly.

Unplug the power cord. Remove the main laptop battery, if any. Look at the bottom of the laptop you will see a small, almost round door. Open it and find the little battery with two wires soldered on each side.
disconnedt the battery, only the positive one will suffice. Now short the wires, connect them together for a few seconds and release. Then hold the power button down while you pull the reset key (on the edge of the laptop) a few times. ( You have not connected the power cord yet). Now wait about 15 minutes. Connect the power cord and turn the laptop on. Wait for the complete boot. Success will show by a blinking cursor at the top right hand side.
The CMOS that holds the power on password is clear now. Turn off the laptop, put the friggin' little battery together, connect the power cord and reboot. While you are tapping on F10 key to get into bios. Set it to factory default and exit.
You are done. If windows starts to load but it asks you for another password it is another story. You need to format the hard drive and reinstal windows.
Enjoy the lil laptop now, dude.
Babak

Dunno if that will help.

Link to comment
https://www.neowin.net/forum/topic/270482-bios-password/#findComment-585281155
Share on other sites

Well, taking the battery out etc, worked :) so the password is removed. just one more problem now, it seems if i turn the laptop off after it being on for more than a few minutes it will refuse to turn back on. However if i come back the next morning the process is repeated :s and the laptop springs to life as soon as i plug the power cord in. Annoying, so close, yet so far. Ideas? :blink:

Cheers

Link to comment
https://www.neowin.net/forum/topic/270482-bios-password/#findComment-585291757
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Not such a great deal, Ultimate, which gives you full 5080 features is $181.99 CAD per month, that's $2183.88 per year, I can buy the 5080 for $1809.99 CAD, then it goes up to $279.99 per month after the first billing cycle. Typical cloud rental, costs more than buying the hardware.
    • Wow, spoken like a true blind hater, you don't even provide arguments. Please, go check my comment above to @seacaptain and you'll find out why what you say doesn't make sense in this context...
    • Get used to this, with AI tooling now uncovering new vulns and getting them exploitable far faster than has ever been possible before software is going to need to be updated far more frequently. Back in the day it may take reseachers weeks or months to do what AI can now do in hours. Once its a threat is discovered it's weaponsized far more quickly, meaning you simply can't be waiting 2, 3, 4 weeks to deploy a patch, it needs to be patched immediately. Going to be interesting handling this in the enterprise space where traditionally patching has been steady, but very staged (and rightly so up until now), that is going to have to change.
    • You don't need to "close all browser sessions constantly" or wait for updates to install. The updates download in the background while you use the browser, without interrupting you, they install automatically the next time you launch the app. And they install very fast (depending on your storage speeds, of course), you have to wait at most 2-3 extra seconds, if any. Seems like you haven't used Edge in a loooooooong time...
    • Segra 1.6.0 by Razvan Serea Segra is a free, open-source OBS-powered game recorder offering fast gameplay capture, instant clips, AI highlights, deep game integration, and seamless uploads—perfect for gamers, streamers, and content creators. Lightweight, fast, zero bloat. Segra key features: Automatic Game Recording: Begin capturing gameplay the moment your game launches, with zero manual setup. Instant Clipping: Save important moments instantly using a customizable hotkey—perfect for highlights, montages, or quick shares. Segra AI Highlights: Let Segra automatically detect kills, assists, deaths, and key events to generate polished highlight reels without manual editing. Gameplay Uploads: Upload recordings and clips directly to Segra.tv for fast sharing and cloud access. Deep Game Integration: Enjoy advanced game-data tracking across hundreds of supported titles, enabling smart highlight generation and stat-informed clipping. High-Performance Capture: Record up to 4K at 144 FPS using OBS-powered technology with minimal performance impact, supporting NVENC, AMD VCE, and custom quality controls. Segra Editor: Edit recordings easily with timeline controls, segment management, and event-based navigation to build the perfect clip. Customization Options: Adjust hotkeys, output formats, storage paths, codecs, capture quality, and performance settings for a tailored recording experience. Segra 1.6.0 changelog: Recording: Added HDR support. Grand Theft Auto: Added game integration for deaths (FiveM and RAGE MP supported). Highlights: Added customizable padding for highlights. Replay Buffer: Added a shockwave visual effect when a replay buffer clip is saved. Audio: Increased the maximum sound effects volume from 100% to 200%. Hotkeys: Fixed hotkeys not triggering while unrelated keys were held. Installer: Added code signing to verify publisher identity, branded the installer, and reduced OS security warnings. OBS: Updated the supported OBS version to 32.1.2. Download: Segra 1.6.0 | 74.4 MB (Open Source) View: Segra Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      175
    3. 3
      +Edouard
      163
    4. 4
      Steven P.
      86
    5. 5
      ATLien_0
      80
  • Tell a friend

    Love Neowin? Tell a friend!