Car Cleaning / Detailing


Recommended Posts

Everyone post your car cleaning procedure here :D We might be able to salvage some handy tips from each other. Mine is as follows:

1) Rinse off car with trigger hose to remove loose dirt and crap.

2) Fill one bucket with water and one capful of car shampoo, then start to clean car with car cleaning brush, starting at the top and working my way down putting extra effort near the bottom of the doors where most of the grime accumulates.

3) Rinse off car again with trigger hose.

4) Dry immediately with Turtle Wax car drying squeegie to prevent streaking/spotting.

5) Doing one at a time, I spray my allow wheels with TW extreme wheel cleaner, wipe with sponge then rinse with trigger hose.

6) I then use Carplan Back to Black on my exterior trim and bumpers, rubbing it in with a cloth.

7) I then apply TW Wet and Black to my tyre walls.

8) Once all the exterior is done, I then hoover my interior, giving my mats a shake outside first, then hoovering them, and the floor underneath them.

9) Once all the hoovering is done I will dust my dashboard, steering wheel etc if necessary.

10) I then give my dash a wipe over with a dashboard polish pad to make it gleam.

Thats about it! It takes me between 1 hour and 1 hour 45mins to complete all this.

Link to comment
https://www.neowin.net/forum/topic/271327-car-cleaning-detailing/
Share on other sites

i do it the other way around to you.

wheels, interior then exterior. Doesnt make much difference though.

One thing i would like to point out is i dont trust "soft brushes", can do some damage if you buy a cheap one.

One other thing i find, every time i wash my car there seems to be another dent of scratch on it! so im washing it on a yearly basis now :D

Ok here is what I do, and it works great!

I get one of those cottony mitts. I use the Mr Clean auto washing thing. You spray water over the spot you are going to clean. Then switch it to soap mode, then soap the spot, then hand wash it with the mitt, then rinse it off, then switch to the ionized water and respray the washed area. No water spots, no drying!

Mr. Clean Auto washer. I won't use anything else.

http://www.homemadesimple.com/mrcleanautodry/index.shtml

Oh and then I use a bucket and sponge to do the wheels afterwards.

Ok here is what I do, and it works great!

I get one of those cottony mitts. I use the Mr Clean auto washing thing. You spray water over the spot you are going to clean. Then switch it to soap mode, then soap the spot, then hand wash it with the mitt, then rinse it off, then switch to the ionized water and respray the washed area. No water spots, no drying!

Mr. Clean Auto washer. I won't use anything else.

http://www.homemadesimple.com/mrcleanautodry/index.shtml

Oh and then I use a bucket and sponge to do the wheels afterwards.

585292326[/snapback]

Dont think we can get that in the UK, but i do have a pressure washer i use to loosen the dirt.

I used a sponge the first couple of times, but found it just didnt shift the muck, especially the stuff that lingers near the bottom of my doors. Its like baked-on crap :p

585292327[/snapback]

I got a "dirty" sponge for those bits, also a "fly sponge" but i use if for the minging bits. works a treat.

  • 2 weeks later...

I think some of your ways are not good for your car. First, always use a microfiber cloth to both wash and dry your vehicle. Using anything else will result in scratches that are minor, but overtime will ruin your clearcoat.

Secondly, use more than a capful of soap in your bucket. Sometimes less is more but not in this case.

When washing, make sure to rinse your washing cloth with your hose so that dirt and grime does not come off inside of the bucket and everytime you dip back into it, you're scrubbing your paint with foreign, dirty particles.

When drying, do NOT use a scrapper of any kind no matter what the manufacturer suggests. All of those will scratch your paint, again, minorly but overtime will look horrible.

Just a few tips for you car washers! :)

1. Wash the entire car with a cotton mitt and the good ol car soap, avoiding the front bumper and headlights, tires and wheels.

2. Wash wheels with remaining soap water and special tire brush.

3. Dry car and wheels with terry cloths.

4. Return to the front bumper and head lights. I drive in the country a lot, so I always come home to a bug covered bumper. But I found a solution. Get some clean fresh motor oil, and stick it in a spray bottle. Shake the bottle up so the oil gets frothy, and spray on the bumper and headlights, avoiding the paint. Wait 5 minutes and run a dry rag over the bumper. You'll notice that it removes almost all the bugs very easily, because the bugs absorb the oil, and want to slide off. Then I wash the bumper 2-3 times, and dry it. (This oil treatment also makes it very easy to get bugs off the second time around, and you don't even notice the thin oil on the bumper.)

5. Windex mirrors and windows, inside and out.

6. Clean out car.

7. Run dust buster and vacuum all inside the car. (Dust buster for hard to get places).

8. Shampoo the carpets with industrial car detailers shampoo and a brush. Run the wet/dry vac over the wet carpet to suck out excess moisture.

9. Condition leather with leather conditioning treatment.

10. Armor-all the interior.

11. Spray a squirt of air freshener in the air vent.

12. Finish up with some tire shine around the tires.

And that doesn't include waxing. If I haven't waxed in a few months, my car gets a clay bar treatment. Otherwise, cleaner wax once every couple of weeks.

Normal detail happens every two weeks, and takes me about 4 hours to complete everything.

Clay bar treatment can take up to 3-4 hours by yourself, and helps big time to have a friend to help.

I'm a clean freak when it comes to my car. :D

1. Wash the entire car with a cotton mitt and the good ol car soap, avoiding the front bumper and headlights, tires and wheels.

2. Wash wheels with remaining soap water and special tire brush.

3. Dry car and wheels with terry cloths.

4. Return to the front bumper and head lights. I drive in the country a lot, so I always come home to a bug covered bumper. But I found a solution. Get some clean fresh motor oil, and stick it in a spray bottle. Shake the bottle up so the oil gets frothy, and spray on the bumper and headlights, avoiding the paint. Wait 5 minutes and run a dry rag over the bumper. You'll notice that it removes almost all the bugs very easily, because the bugs absorb the oil, and want to slide off. Then I wash the bumper 2-3 times, and dry it. (This oil treatment also makes it very easy to get bugs off the second time around, and you don't even notice the thin oil on the bumper.)

5. Windex mirrors and windows, inside and out.

6. Clean out car.

7. Run dust buster and vacuum all inside the car. (Dust buster for hard to get places).

8. Shampoo the carpets with industrial car detailers shampoo and a brush. Run the wet/dry vac over the wet carpet to suck out excess moisture.

9. Condition leather with leather conditioning treatment.

10. Armor-all the interior.

11. Spray a squirt of air freshener in the air vent.

12. Finish up with some tire shine around the tires.

And that doesn't include waxing. If I haven't waxed in a few months, my car gets a clay bar treatment. Otherwise, cleaner wax once every couple of weeks.

Normal detail happens every two weeks, and takes me about 4 hours to complete everything.

Clay bar treatment can take up to 3-4 hours by yourself, and helps big time to have a friend to help.

I'm a clean freak when it comes to my car.  :D

585366508[/snapback]

nice :D

My car is that weird colour where it shows up the dirt and muck REALLY bad, but by the same token it scrubs up really well, and looks mint when clean :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, It would appear so, according to https://finance.yahoo.com/news/how-to-hide-your-home-on-google-maps-apple-maps-204146687.html. Regards, Aryeh Goretsky      
    • Hello, The Nvidia Founders Edition 3080 video card is approximately six years old, correct? Have you looked into whether replacement fans are available for it? Perhaps replacing those will improve cooling, especially when combined with cleaning the card's heatsink and replacing the thermal interface materials. Regards, Aryeh Goretsky  
    • Hello, While ~104 GB of space may seem generous (at least compared to other e-readers which have 8-32GB), I feel at this price point the device should have a Micro SDXC card slot for expansion, particularly if it allows audio books to be installed and played. I hope to see more reviews of 6" phone-sized e-readers on Neowin in the future. It will be interesting to see how they compare. Regards, Aryeh Goretsky
    • Sandboxie Plus 1.17.8 / Classic 5.72.8 by Razvan Serea Run programs in a sandbox to prevent malware from making permanent changes to your PC. Sandboxie allows you to run your browser, or any other program, so that all changes that result from the usage are kept in a sandbox environment, which can then be deleted later. Sandboxie is a sandbox-based isolation software for 32- and 64-bit Windows NT-based operating systems. It is being developed by David Xanatos since it became open source, before that it was developed by Sophos (which acquired it from Invincea, which acquired it earlier from the original author Ronen Tzur). It creates a sandbox-like isolated operating environment in which applications can be run or installed without permanently modifying the local or mapped drive. An isolated virtual environment allows controlled testing of untrusted programs and web surfing. Sandboxie is available in two flavors Plus and Classic. Both have the same core components, this means they have the same level of security and compatibility. What's different is the user interface the Plus build has a modern Qt based UI which supports all new features that have been added since the project went open source. The Classic build has the old no longer developed MFC based UI, hence it lacks support for modern features, these features can however still be used when manually configured in the Sandboxie.ini. Sandboxie Plus 1.17.8 / Classic 5.72.8 release notes: Added added DisableCustomTitleOpt=[process,][y|n] to allow [#] sandboxie title markers on custom-titlebar windows (Delphi VCL, Qt, Electron) that were previously skipped to prevent DWM repaint CPU loops #5387 Changed updated bundled ImDisk driver to 3.0.2 #5419 Fixed fix Suppress logs for expected non-user SIDs #5422 SbieSvc.exe: SBIE2218/2219 error when run program as administrator #5417 fixed explorer.exe crashes in Application Compartment when Huorong Security is installed #5423 Download: Sandboxie Plus (64-bit) | 23.5 MB (Open Source) Download: Sandboxie Classic (64-bit) | 3.0 MB Links: Sandboxie Website | GitHub | ARM64 | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!