Car Cleaning / Detailing


Recommended Posts

Everyone post your car cleaning procedure here :D We might be able to salvage some handy tips from each other. Mine is as follows:

1) Rinse off car with trigger hose to remove loose dirt and crap.

2) Fill one bucket with water and one capful of car shampoo, then start to clean car with car cleaning brush, starting at the top and working my way down putting extra effort near the bottom of the doors where most of the grime accumulates.

3) Rinse off car again with trigger hose.

4) Dry immediately with Turtle Wax car drying squeegie to prevent streaking/spotting.

5) Doing one at a time, I spray my allow wheels with TW extreme wheel cleaner, wipe with sponge then rinse with trigger hose.

6) I then use Carplan Back to Black on my exterior trim and bumpers, rubbing it in with a cloth.

7) I then apply TW Wet and Black to my tyre walls.

8) Once all the exterior is done, I then hoover my interior, giving my mats a shake outside first, then hoovering them, and the floor underneath them.

9) Once all the hoovering is done I will dust my dashboard, steering wheel etc if necessary.

10) I then give my dash a wipe over with a dashboard polish pad to make it gleam.

Thats about it! It takes me between 1 hour and 1 hour 45mins to complete all this.

Link to comment
https://www.neowin.net/forum/topic/271327-car-cleaning-detailing/
Share on other sites

i do it the other way around to you.

wheels, interior then exterior. Doesnt make much difference though.

One thing i would like to point out is i dont trust "soft brushes", can do some damage if you buy a cheap one.

One other thing i find, every time i wash my car there seems to be another dent of scratch on it! so im washing it on a yearly basis now :D

Ok here is what I do, and it works great!

I get one of those cottony mitts. I use the Mr Clean auto washing thing. You spray water over the spot you are going to clean. Then switch it to soap mode, then soap the spot, then hand wash it with the mitt, then rinse it off, then switch to the ionized water and respray the washed area. No water spots, no drying!

Mr. Clean Auto washer. I won't use anything else.

http://www.homemadesimple.com/mrcleanautodry/index.shtml

Oh and then I use a bucket and sponge to do the wheels afterwards.

Ok here is what I do, and it works great!

I get one of those cottony mitts. I use the Mr Clean auto washing thing. You spray water over the spot you are going to clean. Then switch it to soap mode, then soap the spot, then hand wash it with the mitt, then rinse it off, then switch to the ionized water and respray the washed area. No water spots, no drying!

Mr. Clean Auto washer. I won't use anything else.

http://www.homemadesimple.com/mrcleanautodry/index.shtml

Oh and then I use a bucket and sponge to do the wheels afterwards.

585292326[/snapback]

Dont think we can get that in the UK, but i do have a pressure washer i use to loosen the dirt.

I used a sponge the first couple of times, but found it just didnt shift the muck, especially the stuff that lingers near the bottom of my doors. Its like baked-on crap :p

585292327[/snapback]

I got a "dirty" sponge for those bits, also a "fly sponge" but i use if for the minging bits. works a treat.

  • 2 weeks later...

I think some of your ways are not good for your car. First, always use a microfiber cloth to both wash and dry your vehicle. Using anything else will result in scratches that are minor, but overtime will ruin your clearcoat.

Secondly, use more than a capful of soap in your bucket. Sometimes less is more but not in this case.

When washing, make sure to rinse your washing cloth with your hose so that dirt and grime does not come off inside of the bucket and everytime you dip back into it, you're scrubbing your paint with foreign, dirty particles.

When drying, do NOT use a scrapper of any kind no matter what the manufacturer suggests. All of those will scratch your paint, again, minorly but overtime will look horrible.

Just a few tips for you car washers! :)

1. Wash the entire car with a cotton mitt and the good ol car soap, avoiding the front bumper and headlights, tires and wheels.

2. Wash wheels with remaining soap water and special tire brush.

3. Dry car and wheels with terry cloths.

4. Return to the front bumper and head lights. I drive in the country a lot, so I always come home to a bug covered bumper. But I found a solution. Get some clean fresh motor oil, and stick it in a spray bottle. Shake the bottle up so the oil gets frothy, and spray on the bumper and headlights, avoiding the paint. Wait 5 minutes and run a dry rag over the bumper. You'll notice that it removes almost all the bugs very easily, because the bugs absorb the oil, and want to slide off. Then I wash the bumper 2-3 times, and dry it. (This oil treatment also makes it very easy to get bugs off the second time around, and you don't even notice the thin oil on the bumper.)

5. Windex mirrors and windows, inside and out.

6. Clean out car.

7. Run dust buster and vacuum all inside the car. (Dust buster for hard to get places).

8. Shampoo the carpets with industrial car detailers shampoo and a brush. Run the wet/dry vac over the wet carpet to suck out excess moisture.

9. Condition leather with leather conditioning treatment.

10. Armor-all the interior.

11. Spray a squirt of air freshener in the air vent.

12. Finish up with some tire shine around the tires.

And that doesn't include waxing. If I haven't waxed in a few months, my car gets a clay bar treatment. Otherwise, cleaner wax once every couple of weeks.

Normal detail happens every two weeks, and takes me about 4 hours to complete everything.

Clay bar treatment can take up to 3-4 hours by yourself, and helps big time to have a friend to help.

I'm a clean freak when it comes to my car. :D

1. Wash the entire car with a cotton mitt and the good ol car soap, avoiding the front bumper and headlights, tires and wheels.

2. Wash wheels with remaining soap water and special tire brush.

3. Dry car and wheels with terry cloths.

4. Return to the front bumper and head lights. I drive in the country a lot, so I always come home to a bug covered bumper. But I found a solution. Get some clean fresh motor oil, and stick it in a spray bottle. Shake the bottle up so the oil gets frothy, and spray on the bumper and headlights, avoiding the paint. Wait 5 minutes and run a dry rag over the bumper. You'll notice that it removes almost all the bugs very easily, because the bugs absorb the oil, and want to slide off. Then I wash the bumper 2-3 times, and dry it. (This oil treatment also makes it very easy to get bugs off the second time around, and you don't even notice the thin oil on the bumper.)

5. Windex mirrors and windows, inside and out.

6. Clean out car.

7. Run dust buster and vacuum all inside the car. (Dust buster for hard to get places).

8. Shampoo the carpets with industrial car detailers shampoo and a brush. Run the wet/dry vac over the wet carpet to suck out excess moisture.

9. Condition leather with leather conditioning treatment.

10. Armor-all the interior.

11. Spray a squirt of air freshener in the air vent.

12. Finish up with some tire shine around the tires.

And that doesn't include waxing. If I haven't waxed in a few months, my car gets a clay bar treatment. Otherwise, cleaner wax once every couple of weeks.

Normal detail happens every two weeks, and takes me about 4 hours to complete everything.

Clay bar treatment can take up to 3-4 hours by yourself, and helps big time to have a friend to help.

I'm a clean freak when it comes to my car.  :D

585366508[/snapback]

nice :D

My car is that weird colour where it shows up the dirt and muck REALLY bad, but by the same token it scrubs up really well, and looks mint when clean :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
    • It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!