• 0

Diskeeper or PerfectDisk


Diskeeper or PerfectDisk  

330 members have voted

  1. 1. Diskeeper or PerfectDisk

    • Diskeeper
      155
    • PerfectDisk
      175


Question

I have tried both Diskeeper and PerfectDisk and I must say they both took over 24 hours to defragmentate my 130gb partition and I never really noticed much of a speed difference.

Now however I have formatted my computer and I am looking to try either Diskeeper of PerfectDisk again. So which one do you think I should go for?

Feedback would be appreciated.

P.S. This is an independant thread from the "best defrager" as I only want feedback on the above mentioned two products. So dont be giving me stick about how this question is asked at least 10 times a week.

Thanks

Martyn

Edited by Martyn
Link to comment
https://www.neowin.net/forum/topic/284633-diskeeper-or-perfectdisk/
Share on other sites

Recommended Posts

  • 0

I have tried them all and every program puts an extra active process...

For a while now I have only been using the windows defragmenter and it does enough for me.

have this little bat file that I run from time to time.

Rundll32.exe advapi32.dll,ProcessIdleTasks

Defrag C:

Defrag D:

Defrag E:

Defrag F:

And why not use the functions that exist...

http://www.microsoft.com/windowsxp/using/s..._october08.mspx

  • 0

i have a 120 gb drive and it takes less than 3 hours to defrag it with perfect disk,i once was a diskeeper guy but switched to perfect disk.

here are the pros and cons of both.

Perfect disk:

Pros:does not require 30% space that diskeeper does to defrag properly(it can work with as little as 5% disk space),you don't need to defrag as often with perfect disk,does not need to be running in background to defrag thus saving resources

Cons:the defrag takes a very long time the first time but it gets faster with every defrag.you cannot resize the MFT.

Diskeeper:

Pros:the scan does not take forever.you can resize the MFT but with perfect disk you cannot.it replaces the windows defrag

Cons:on windows 2000 or earlier if you tried to reinstall it it would be unable to,it requires a min of 20% space to work but 30% is minimum for it to defrag properly,you cannot repair it like with perfect disk you can without having to remove it then reinstall it.it runs everytime you boot up windows and in the background thus taking up resources.

  • 0

diskeeper made the one that comes with xp so if you like that one i guess you can't go wrong with diskeeper. its fast and has frag shield. it shows performance improvements as well as adjusting the amount of space for mtl files.

perfectdisk is however different in most areas. now being not as fast doesn't necessary mean you are slower in doing defraging, it could well mean it defrags better and does a better job. i feel that way but thats my opinion. i doesn't allow me to defrag my small hdd mp3 player which i guess isn't much point to defrag to perfectdisk but diskeeper does it. boot defrags for both work great. i find with perfectdisk management of boot files on its own does a really good arrangement for a faster smoother bootup. the settings are there for almost ever type of anal defragger there is. the really fussy to the speed is everything people. smart defrag + extension space management works really well. i also think that offline defrag that allows me to defrag my sata hdd offline is great.

  • 0
Glad it worked out for you :)

Thanks. Me too. I like to learn things.

I do wish it had the advanced settings enabled by default in order to make the process more effective right from the start. It would be great if the Agressive setting was checked and they indicated to the user that the best results can likely be found after an offline defrag has been completed.

Why not go hardcore right out of the box? It might just blow away the others in the comparisons of defraggers in their default config.

One thing I'd like to have the option of in all apps is to have NOTHING loaded into memory until I specifically activate the program. I would prefer not to have anything waiting in the background, monitoring and scheduling and the like. I don't mind doing it manually. In fact, I prefer it. I like having the OPTION of doing it auto if desired, but I also would like the option not to. Doesn't seem too much to ask. :)

i also think that offline defrag that allows me to defrag my sata hdd offline is great.

So far that is the feature that seems to put Perfect Disk in a nice light for me. Norton Speed Disk, Windows Defrag and Diskeeper all seem less effective in their offline / boot time defrags than Perfect Disk, at least in my tests.

I really wish that we could have a bootable command-line environment for Windows XP that would support fully the FAT / FAT32 / NTFS file systems natively.(so when you do DIR you get a real list, and when you copy / move, etc. you did not have to worry about the 8.3 equivalent getting things goofed - maybe even a Norton Commander type app to help with file management. Heck, Linux has Midnight Commander and it works flawlessly with long file names)

We could run things like Ghost, Defrag, Diskfix and other command-line or character driven menu / UI systems for things when needed. Norton Commander even had that Serial or LPT1 port connection where you could copy files between machines and the like, plus built in ZIP support.

I honestly think that would be a very cool option to have. It could be done fairly easily if Microsoft chose to, I think.

Just my continued wish for such an item that sadly may never quite come in that config. If I understand it, the scripting command drop-in would only work inside of a full-on Longhorn boot, is that right?

Edited by Bearded Kirklander
  • 0
i have a 120 gb drive and it takes less than 3 hours to defrag it with perfect disk,i once was a diskeeper guy but switched to perfect disk.

My 160gb hardrive only takes about 15 minutes at the most to defrag, and I defrag it once every week. I think the trick to get a drive to defrag fast is as soon as you have installed windows then defrag it.

  • 0

^No, the trick is to defrag consistently, causing fragmentation to stay at low lvls before it goes beyond that and cause high file access times and also take a long time to defrag. Defragging after an OS Installation should be a good practise of anyone.

  • 0

now it takes maybe 30 mins for mine or less but thats pretty good,it also depends on the settings you have applied like if you do the smart placement and or use the agressive free space consolidation then that adds up,i defrag maybe 1nce every few weeks depending on what perfect disk recommends.i always use the smart placement and agressive free space colsolidation settings.

  • 0

o&o > perfectdisk > *

and that's all you really need to know. diskeeper may be alright for people who want regular, 'tolerable' defrags, but for anyone who really wants things cleaned up and packed tightly, you've gotta look at o&o or pd. their 'modified' defrag options blow diskeeper out of the water.

  • 0
o&o > perfectdisk > *

and that's all you really need to know.  diskeeper may be alright for people who want regular, 'tolerable' defrags, but for anyone who really wants things cleaned up and packed tightly, you've gotta look at o&o or pd.  their 'modified' defrag options blow diskeeper out of the water.

I wish that Perfect Disk had all of the high powered options enabled by DEFAULT And also recommended / ran an OFFLINE defrag with all the options checked by DEFAULT as well, to ensure that the user got the best initial defrag foundation possible.

Should not have to poke around in the options and set a variety of things in order to get the most effective defrag, I think.

At the very least, have a Wizard that had an option for a "Maximum Performance" defrag that does all that when asked. :)

  • 0

iv used both and i actually noticed a difference between diskkeeper and pdisk, after one month of fragmentation the slow down with perfect disk was clearly fixed, a month later tried with diskeeper and it remained. I later used perfect disk and it was gone, all in all its prefrence but thats just my 0.02

  • 0

Never even heard of Perfect Disk before this thread, I think.

None of these main ones seem to be crap. Not fair to say that. Some may be a bit more capable if you configure them right, but to each his/her own. No reason to bash the competition like video fanboys are known for doing! :p

Edited by Bearded Kirklander
  • 0
o&o > perfectdisk > *

and that's all you really need to know.  diskeeper may be alright for people who want regular, 'tolerable' defrags, but for anyone who really wants things cleaned up and packed tightly, you've gotta look at o&o or pd.  their 'modified' defrag options blow diskeeper out of the water.

586340448[/snapback]

I like O&O for its nice, clean interface, its 5 different defrag methods, and a set-and-forget feature similar to Diskeeper's. But for some reason it created numerous disk errors on my hard drive. Could've been plain old bad luck, but I've stayed with Perfectdisk. The thing's very effective in defragmenting. Thus, it gets my vote.

Now for Diskeeper... ugh. Last time I tried it (version 7 or 8) it barely made a difference, and it had a God-awful interface. :x

  • 0

lol wow, my 250GB (about half full) defrags with diskeeper in about 5-10 minutes. Even the first time I ever did it, wasn't much if at all longer.

between the two, I doubt there's much if anything between the two performance wise so, choose depending on the features and settings you'll use.

  • 0

I have had a look over at the Diskeeper's website and it's a big download, and then went over to PerfectDisk's site and have found that it's a small download. I downloaded PerfectDisk and to my amazement it did what it was advertised to do. I have the demo installed with 8 more days. PerfectDisk intergrates nicely into the Computer Management app (right-click My Computer, click Manage...). It can defrag my 80GB drive, even when I am doing other computer stuff, quickly.

  • 0

I have also tried both Diskeeper and PerfectDisk. Diskeeper was a fine tool, but first time with it I ran an offline defrag to clean up folders and the page-file. Afterwards, Windows began to complain about corrupt files, but this problem strangely just 'disappeared' later that day. I also didn't like the fact that Diskeeper completely took over Windows XP's Defragmenter.

PerfectDisk on the otherhand, I am quite impressed with. The Smart Placement feature is great. I also like the boot files management settings which does shave a couple seconds booting. I usually schedule PerfectDisk to run every night on my main 80gig HD. Only thing I think is missing in PerfectDisk is the ability to resize the MFT. Maybe they will include this in a new version...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • ...but you're Johnny, from Australia?    
    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DWARF mini review: the world's smallest smart telescope for night and day sky captures by Steven Parker DWARFLAB reached out to me asking if I was interested in checking out the DWARF mini, which is a portable astronomy telescope designed for amateur astronomers. Why do I say it's for amateurs? Well, for starters, it's not what you'd call "high end"; it's more of a professional-grade starting point for amateurs serious about capturing what's up there in our night and day skies. A typical amateur astronomer is most likely thousands of dollars deep into the hobby, and I will make no claims that this DWARF mini (at a fraction of the cost) could replace it all, okay? Well, if you read on, it will be clearer what I am trying to convey. Disclosure: DWARFLAB provided a free sample without any editorial input or review pre-approval. I have always been interested in looking up and observing the night sky. I see satellites crossing the sky above my garden most nights, and I am always looking at the moon. Yeah, I have a 200MP camera on my phone, but at 200X zoom, AI takes over and makes the pretty moon pictures that I snap, the DWARF mini does not, you get an actual true picture of what you can barely see with the naked eye. Before we start, let's share the highlights of the DWARF mini in bite-sized format: Pocket-Sized & Ultra-Lightweight Weighing just 1.85 lbs (840g), the DWARF mini easily fits into a backpack or large pocket. Its all-in-one, compact design makes it the ultimate grab-and-go digital telescope for hiking, camping, or traveling to dark-sky locations. Intuitive App Control & Built-in Sky Atlas Go from unboxing to your first shot in just 3 minutes! The DWARFLAB App provides a seamless experience with an interactive star map. Simply select your target and start exploring without the steep learning curve of traditional setups. Auto GOTO & 360° Pivot Freedom Enjoy pinpoint automated tracking with full 360° rotation. Powered by a high-sensitivity Sony IMX662 sensor (1/2.8-inch, 2.9μm pixels), it captures amazing, low-noise astro details, bringing faint nebulas and star clusters to life with stunning clarity. Pro-Level EQ Mode & Long Exposure Unlock advanced deep-space imaging with Equatorial (EQ) Mode. Supporting impressive single-frame exposures up to 90 seconds and featuring built-in light pollution filters, it easily cuts through city glow to reveal intricate celestial structures. Smart Cloud Processing & All-Ages Fun Effortlessly enhance your raw data with integrated cloud processing for professional-grade results. Perfect for beginners, kids, and adults, this telescope makes exploring and sharing the wonders of the universe an exciting, family-friendly adventure. The packaging is a pretty minimal affair with the outer box opening like a flap to reveal the plastic mould of the DWARF mini sitting in it. Below, the Sun filter, charging cable, cleaning cloth, and documentation can be found. DWARFLAB also provided a Mini Hydraulic Tripod ($89.99), and I highly recommend getting it if you plan on purchasing the DWARF mini, as it fully supports the motorized tracking feature of the telescope; plus, at 840g, the weight of the telescope, you will need a tripod that supports more than the weight of a smartphone anyway. What's in the box DWARF Mini Smart Telescope × 1 Sun Filter x 1 Type-C to Type-C Cord x 1 Cleaning Cloth x 1 User Guide With that out of the way, here are the full specs: DWARF mini Dimensions (DWH): 60.70 mm x 100.38 × 183.61 (2.39" x 3.95" x 7.23") Weight: 840g (1.85lbs) Aperture diameter: 30 mm (telephoto), 3.4 mm (wide angle) Image Sensor: SONY IMX662 1/2.8" (Telephoto) OmniVision OS02K10 1/2.8" (Wide-angle) Focal length: 150 mm (telephoto), 6.7 mm (wide-angle) Equivalent focal length: 1016 mm (telephoto), 45 mm (wide-angle) Shutter Speed: Tele - 1/10000-90s, Wide - 1/10000-30s Maximum exposure time: 90s (telephoto & wide-angle), Both in EQ mode Rotation range: Lens: 225°, Base: 360° Effective Pixels: 2.07M Maximum Resolution: 1920 × 1080 (Telephoto & Wide-angle) Built-in filters: Astro, Dark, Duo-Band (Telephoto), Astro (Wide-angle) Output: JPG, FITS, TIFF, MP4 Shooting Mode: Photos, Videos, Astronomy, Burst Shooting, Time-lapse Photography Storage: 64 GB Battery: Built-in 7000 mAh, supports external USB charging Charging Port: Type-C NPU: 1 TOPS Features: WiFi, NFC NFC One-Touch Connection Astronomy Post-Processing/Appointment Shooting/Astronomy Mosaic Wi-Fi Transmission Range: 15m (open environment) Color: Black Compatibility: iOS & Android smartphones/tablets Warranty: 2-years (24-months) MSRP: $399 Design Charge port On/off button Lens On the DWARF mini itself, it is a pretty minimal affair. On one side, there is a Type-C USB port to charge the non-removable 7000 mAh battery, and on the other side, a large button to power on or off the telescope. The button is flanked by an LED that is green when connected via the DWARFLAB app, or lights up red when being powered off. Below the button, there are four LEDs that indicate battery power. The DWARF mini does not have any sharp edges as all sides are rounded off; it has a good heft to it, but the weight of it feels quite balanced in the hand, so it isn't top or bottom-heavy. On the front there is the DWARFLAB logo which is quite small and there are no other markings on it. The tripod offers full 360° rotation of the motorized base, which allows for tracking for the time-lapse mode, but also for the 90-second captures of nearer objects in the sky, such as the Sun or the moon. Usage To get started, simply power on the DWARF mini and open the DWARFLAB app, tap on Connect, and it will scan for the DWARF mini over the Wi-Fi network. The device supports both 2.4 GHz and 5 GHz Wi-Fi, as well as Bluetooth for discovery, so connection issues were minimal in my experience with it. As previously noted in the specs, the DWARF mini will stay connected with a phone or tablet up to 15 meters in an open environment, such as a backyard. Lighting status Powering on: The green circular light will rotate and breathe in turn Powering off: The red circular light is gradually extinguished Connecting: Green light strip rotating Connected: Green light strip solid/always on 4 lights 1= 0-25%, 2= 25-50%, 3= 50-75%, 4= 75-100% battery power To view the full lighting status, such as tracking mode and connection failure, you can check the user guide on the official DWARFLAB page. DWARFLAB app Above, you can see the steps undertaken to connect the DWARFLAB app to my Galaxy S26 Ultra. Weirdly, I got an alert that a firmware update failed to get uploaded to the DWARF mini the first time, but upon retrying, it worked. Then place the DWARF mini outside, make sure your smartphone or tablet is connected to it, and then head back inside, because you can manage it from the comfort of your home. Simply enter the Atlas tab in the app and search for what you want to capture, and then tap on the camera icon; the DWARF mini will then attempt to track the object and give you a live view right on your connected device. Results I've had the DWARF mini since April, but even though my garden is south-facing, I had a lot of trouble trying to capture a good image of the moon. In the end, it was possible after I took it with me on a trip to my parents in Southend, UK, at the end of May. Here is a capture of the moon, resulting from 20 stacked images over a 90-second exposure. What you are seeing here is not AI-assisted. A good example of what I mean is the latest flagships with their 200MP cameras claiming to capture things like closeups of the moon, and while they are not as good as the above example on the DWARF mini, the resulting image on smartphones is actually AI-assisted above 30X zoom. Here is an example of a similar shot at the moon at 200X zoom using an HONOR Magic8 Pro. The difference is clear. Next, here we have a shot of the daytime moon. Here is a shot of Arcturus, the red giant star, which is the fourth brightest in the night sky. As previously mentioned, it could be a bit clearer, but clouds passing in front of it muddied the shot a bit. The Sun The DWARF mini also ships with a sun filter, meaning you can take great shots of the sun as well. Tracking Sun Resulting (stacked) shot Live zoom The pictures themselves are limited to Full HD, and some of the examples actually came out in HD (1280x720), but this is because the standard telescopic result is in 720p while "Wide" is in 1080p. Above you can see how in the app the Sun is tracked, the resulting capture, and Live zoom. I have only scratched the surface of what is possible with this telescope; I found several examples online of shots of the Milky Way, among others, such as nebulae and galaxies. All of this requires patience and knowledge, although if you know what you are looking for, simply enter it in the Atlas tab in the DWARFLAB app, tap the camera icon, and the telescope will attempt to track it. Conclusion The good The DWARF mini definitely places itself in a price point that makes astrology accessible to anyone looking to get started in the hobby. Say you want to have a closer look at the moon, simply enter it in the Atlas, and the Live view also lets you zoom in and snap pictures. The bad Some issues I came across while operating the DWARF mini were that it sometimes failed to connect unless I held my smartphone right next to it, and finding and tracking sometimes took several attempts to get it calibrated. I discovered that it helped if I sort of positioned and pointed the telescope in the general area it was supposed to detect, but this obviously wouldn't work with objects you can't see with the naked eye; more testing is required for that. Another bit of advice is to ensure that the lens is clean. While making the examples of live zooming on the sun, I discovered that the telescope lens and sun filter were not completely clean, and only after cleaning with a microfiber cloth was I able to get a decent shot of the sun. Where to buy and a coupon Okay, $399 is not cheap for a side hobby, but nor is a $1,500 smartphone flagship that you'll most likely have for a couple of years. This is a one-time entrance into astrology, and it won't become obsolete in one year like a smartphone. It's a thumbs up from me. The DWARF mini is available to buy right now in the U.S. and U.K. at the links below. DWARF mini for $399 on the official site DWARF mini for $399 on Amazon U.S. Use the NEOWIN5OFF coupon code for an additional 5% off at checkout (expires June 21) As an Amazon Associate, I earn from qualifying purchases.
    • Adobe Acrobat Reader Dis Continued
    • The name, you mean? If so, it's actually the objects common name. There's another one called NGC 7293 which is also known as Helix Nebula (because we're looking at a helix structure top down) but other times also known as the Eye of God. You'll understand when you see it
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      PsYcHoKiLLa
      272
    3. 3
      Skyfrog
      75
    4. 4
      +Edouard
      71
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!