Recommended Posts

I'm going to buy a DVD recorder in the next few days, but need some help deciding which one. I'm not a big fan of Sony, but theirs looks pretty good. The 2 models I have been looking at are the RDR-GX300 and the RDR-VX500 . $399 and $499 respectively. The VX500 has a VCR also, wich is nice to do VHS to DVD, and it has some other features like i.Link for camcorders. But what I need the most, is DVD Recording performance, and quality. Top I'm willing to spend is $500, unless there is something so special, that I should invest a bit more.

Let me know what you know, and what you think, heh.

Thanks.

Link to comment
https://www.neowin.net/forum/topic/288680-dvd-recorder/
Share on other sites

You want to spend 500$, buy this one Panasonic

I personally bought the one with 120gb HDD HDD+DVD

All I have to say is this is such better to have the HDD. Otherwise, you always have to burn tv program on dvd

I love to record a tv series completly and then burn all the shows on a dvd.

also, panasonic supports dvd-ram

Link to comment
https://www.neowin.net/forum/topic/288680-dvd-recorder/#findComment-585517790
Share on other sites

well, so far im leaning towards the Sony RDR-VX500 ...  It can also play CDRW MP3s, so its pretty cool, and has the i.Link for Camcoders, plus easy VHS Dubbing. :) ... I'll read more about others.

585518489[/snapback]

One other unit you may wan tto look at is the LG LGXBR446 . Has 7 in 2 mem card reader built in also.

Link to comment
https://www.neowin.net/forum/topic/288680-dvd-recorder/#findComment-585518556
Share on other sites

and doesn't support dvd-rw, dvd+r, dvd+rw. I'd say go with the 500 if you want easy vhs dubbing, however, if you don't mind working a little bit, save the cash and get the 300.

585518357[/snapback]

who need dvd+rw or dvd-rw when you have dvd-ram which you can delete the part you want on the disk to rewrite anything else... which dvd-rw and dvd+rw don't

You have to erase the entire dvd!

Also at the highest quality on the panasonic, you need a dvd-ram 8.5gb to record a 2h movie. Want quality? it's there

and from a couple of review I saw, panasonics are the highest rates

Link to comment
https://www.neowin.net/forum/topic/288680-dvd-recorder/#findComment-585518641
Share on other sites

who need dvd+rw or dvd-rw when you have dvd-ram which you can delete the part you want on the disk to rewrite anything else... which dvd-rw and dvd+rw don't

You have to erase the entire dvd!

Also at the highest quality on the panasonic, you need a dvd-ram 8.5gb to record a 2h movie.  Want quality? it's there

and from a couple of review I saw, panasonics are the highest rates

585518641[/snapback]

Incorrect. There are recorders out there that do not require you wipe the disc clean. For instance, one Toshiba model will take the second show off a dvd-rw and move it to the beginning of the disc (if you delete the first show) so that you can record from where the second show leaves off instead of being confied to the same recording length of the first show/

Also, dvd-ram lacks compatibility. Try to play your discs in a Sony, Toshiba, Magnavox, Philips, Samsung, etc dvd player. Most models simply will not play it.

Link to comment
https://www.neowin.net/forum/topic/288680-dvd-recorder/#findComment-585518888
Share on other sites

I'm no t a bit sony fan either finalcut, but they seem to be prety good, and got good reviews. Also, it says in the sony manual that to record a widescreen, 16:9, you need to use a DVD-R or DVD-RW, wich I think some models out there dont even bother having compatibillity for DVD+R and DVD+RW

Most likely, I'm going to get it from online, cuz its cheaper, but I have to get it before March 1st, F1 season starts the first weekend of March, and I need it. :p

Link to comment
https://www.neowin.net/forum/topic/288680-dvd-recorder/#findComment-585519768
Share on other sites

Juguard: I've shopped sony too because I was a hufe fan in the past. All I wanted is something with dvd-ram support for the only reason that when you record a movie to a dvd-r or anything else, to have decent quality, you will need 2-3 dvds

dvd-ram 2 sides can record only 2hours at highest quality on my panasonic

So if you have a big screen tv, think about it!

Personally, the format compatibility wasnt an issue compared to quality. My panasonic has 213h storage at lowest quality and around 23h at highest!

I wont bother you if you have 32" and less tv but when you have bigger... ugh

Sony are great and I've been a fan for over 20 years now but their dvd-recorder didnt impress me at all. Maybe you have models and prices I dont have where I live

About the 16x9 on dvd-r and dvd-rw, im really not sure from where you know that. I'd like to see some articles.

As my panasonic records on dvd-r, I wont have that supposly issue

cheers

Link to comment
https://www.neowin.net/forum/topic/288680-dvd-recorder/#findComment-585520895
Share on other sites

well, what type of quality can you record on a DVD-R? The Sony RDR-VX500 supports: Recording Hours on DVD: 1H(HQ)/1.5H(HSP)/2H(SP)/3H(LP)/4H(EP)/6H(SLP) The only way to see the quality is to try it. Yea, I'm taking a risk buying either unit, but I really dont want to edit everything I record. I just want to recorde, name the DVD to whatever I recorded, and Store it. Whats going to suck, is I bet in a year from now, they will have Dual Layer DVD Recorders, or maybe even Blue Ray, or HDVD, or whatever its called. Wich is gona suck spending money for the current DVDs.

I might look at DVD-RAM so I can record at higher quality, so I can fit more on a single DVD-Ram, then in about 2 years get a new recorder and convert everything to Blue Ray. If they are availale in 2 years. We'll see.

Link to comment
https://www.neowin.net/forum/topic/288680-dvd-recorder/#findComment-585522231
Share on other sites

like bangbang is saying, just buy what you need

We would be always waiting on new stuff thinking about new upcoming technology...

the sony HQ quality is probably the same as my highest too, 1h on a single dvd 4.7gb

Below that on big screen, the image is bad :/

for the price of dvd-ram, its true they are expensive, but I get em as same price of dvd-r from a friend :)

take your pick and send us your impression

good luck

Link to comment
https://www.neowin.net/forum/topic/288680-dvd-recorder/#findComment-585523181
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • One of the strangest galaxies in our Universe could help answer some long overdue questions by Sayan Sen Image by Pixabay via Pexels | Not representative An international team of astronomers led by the Department of Astronomy at Tsinghua University has discovered an unusually metal-poor galaxy that may contain signs of first-generation star formation. The galaxy, named Metal-Pristine Galaxy COSMOS Redshift 3 (MPG-CR3), or CR3, was identified using observations from the James Webb Space Telescope (JWST), the Very Large Telescope (VLT), and the Subaru Telescope. The findings, published in The Astrophysical Journal Letters, describe CR3 as the most metal-poor galaxy known from the period known as "cosmic noon," around 11.5 billion years ago. Cosmic noon refers to a period when the universe was producing stars at its highest rate and galaxies were growing rapidly. In astronomy, "metals" refers to all elements heavier than helium, including oxygen, carbon, and iron. Because CR3 contains so few of these heavier elements, researchers say it closely resembles what scientists expect the earliest galaxies in the universe may have looked like. The discovery is significant because it could offer clues about Population III (Pop III) stars, the first generation of stars thought to have formed after the Big Bang. These stars are believed to have formed from gas made almost entirely of hydrogen and helium, before heavier elements were created inside stars and spread across the universe through supernova explosions. Hence this is why CR3 has been referred to as a "living fossil." Scientists have long believed that Population III stars existed only in the very early universe. As more generations of stars formed and died, they enriched surrounding gas with heavier elements, making the conditions needed for metal-free star formation increasingly rare. Because of this, researchers expected the formation of such stars to have largely ended after the epoch of reionization, a period when radiation from the first stars and galaxies transformed the neutral hydrogen filling the universe and made it largely transparent to ultraviolet light. CR3 appears to challenge that idea. The galaxy was observed at a redshift of z = 3.193 ± 0.016. Redshift measures how much light from a distant object has been stretched as the universe expands and helps astronomers determine how far back in time they are looking. In this case, the redshift corresponds to roughly 11.5 billion years ago during cosmic noon. Although the universe was already several billion years old by that point, CR3 shows characteristics more commonly associated with much earlier galaxies. Observations revealed exceptionally strong emissions from hydrogen and helium, including Lyα, Hα, and He I λ10830. Lyα, or Lyman-alpha emission, is a specific wavelength of light produced by hydrogen and is widely used to study distant galaxies. Hα emission is another hydrogen signature commonly used to trace active star formation, while He I λ10830 is produced by helium and can indicate the presence of very hot, young stars. The measured equivalent widths of EW₀(Lyα) = 822 ± 101 Å and EW₀(Hα) = 2814 ± 327 Å are among the highest ever observed in star-forming galaxies. Equivalent width is a measure of the strength of an emission line relative to the surrounding light, and such large values are typically associated with intense and very recent star formation. At the same time, researchers found no statistically significant detections of metal emission lines, including [O III] λλ4959, 5007 and C IV λλ1548, 1550. Emission lines act as chemical fingerprints that reveal which elements are present in a galaxy. Oxygen and carbon lines are commonly seen in galaxies that have already undergone significant chemical enrichment. Their absence in CR3 suggests an unusually pristine environment. Using abundance calibration methods developed with JWST observations, the team placed a 2σ upper limit on the galaxy's gas-phase metallicity of 12+log(O/H)<6.52, corresponding to less than 0.7% of the Sun's metallicity (Z < 7 × 10⁻³ Z⊙). Gas-phase metallicity measures the abundance of heavy elements in a galaxy's gas. A 2σ upper limit indicates that the true value is very unlikely to be higher than the quoted threshold. Even when accounting for uncertainties in the calibration methods, the most conservative limit remains 12+log(O/H)<6.95, making CR3 the most metal-poor galaxy identified at cosmic noon. The galaxy also appears to contain very little dust. Researchers measured a Lyα/Hα flux ratio of 13.9 ± 2.5, a result that suggests negligible dust attenuation, meaning very little of the galaxy's light is being absorbed or scattered by cosmic dust. Because dust is usually produced by earlier generations of stars, this finding further supports the idea that CR3 has experienced very little chemical enrichment. Further analysis using spectral energy distribution modelling, a technique that compares observed light with theoretical models, suggests that CR3 contains an extremely young stellar population only around 2 million years old. The modelling, which used Population III stellar templates, also indicates the galaxy has a stellar mass of approximately 6.1 × 10⁵ M⊙. The symbol M⊙ represents one solar mass, or the mass of the Sun. One of the key questions raised by the discovery is how such a chemically primitive galaxy could exist in a universe that had already spent billions of years producing heavier elements. To investigate this, the researchers examined CR3's surroundings. Their analysis suggests the galaxy may lie in a slightly underdense environment, with a density contrast of roughly δ ≈ −0.12. An underdense region contains less matter and fewer galaxies than average. The team suggests that this relative isolation may have helped preserve pockets of pristine gas. Metal-rich material expelled from nearby galaxies may never have reached CR3, while the lower rate of galaxy mergers and interactions could have slowed the mixing of enriched gas into the system. If future observations confirm these findings, CR3 could provide some of the strongest evidence yet that first-generation star formation continued well after the epoch of reionization. Such a result would challenge the conventional view that pristine star formation ended by z ≳ 6 and suggest that small pockets of metal-free gas survived much longer than previously thought. Researchers stress that more observations will be needed to determine the galaxy's true nature. Future spectroscopic studies with higher resolution and better signal quality could help confirm whether CR3 is genuinely hosting Population III star formation. The discovery is also expected to encourage searches for other similar galaxies, which could help astronomers better understand how the first stars formed and how galaxies evolved in the early universe. Source: Tsinghua University, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • "I think in the immediate absence of a partner to apply relief" In the words of Sterling Archer... "Phrasing!"
    • For me, the fundamental problems with these "smartglasses" is that they really don't work well for people with significant prescriptions and massively up the price if you use attached lenses if they have displays, and if they don't, then they're not actually "smart" anything, rather just connecting to your phone and relaying voice to an AI. In a few cases like this, they throw in small cameras to feed video to the AI. All around, these feel like both a solution looking for a problem, and the problems it tries to solve seem more easily solved by different approaches and designs. Oddly, if the rumours are true, Apple may actually have invented something for once and it kind of does this right: put cameras in ear buds and manage the interface to AI exactly as most of us do: tapping on an ear bud and saying "Hey Google" or "Hey Siri." That makes them compatible with almost everyone, can double up as a hearing assist device, an impaired vision assist device, a "smart" device... and answer your phone and play music. That just seems like a better solution all around.
    • Usually the bigger ones with many fixes/changes take a few, theyre an exception to the rule most likely
    • If you don’t get lucky with Valve’s Steam Machine reservation system, you can make your own Steam Machine instead. Valve says that “starting with the SteamOS 3.8 release, you can put together your own Steam Machine using whatever PC parts you want.” SteamOS 3.8.10 launched last week with a slew of updates, including “improved compatibility with recent Intel and AMD platforms.” Alongside that improved compatibility, Valve is giving gamers the green light to install SteamOS on their own desktops. In an interview with The Verge, Valve’s Pierre-Loup Griffais said Valve has been “rolling out improvements to [SteamOS] so it’s more compatible with desktop hardware,” including eventual support for Nvidia graphics. Griffais says Valve has “a growing team” working on Nvidia driver support for SteamOS, adding, “We’re collaborating with Nvidia very closely.” While he mentioned that Nvidia support might not come this year, Griffais emphasized that “it’s certainly something that we’re working on in the background.”     Subscription not needed: https://archive.fo/Tssfc Subscription needed: https://www.theverge.com/games/953411/valve-steamos-desktop-nvidia
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      454
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      84
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!