[HOW TO] Get back your Windows XP Bootloader


Recommended Posts

If for some reason you find the need to get back to your Windows XP bootloader instead of the one installed by your Linux distro, simply follow these instructions:

1. Boot up with your Windows XP disc.

2. Select the option Recovery Console.

3. At the prompt, type "fdisk /mbr" (without the quotes of course)

4. Restart your computer.

Edited with correct info from the following posts...

For me and some others you might need to type "fdisk /mbr" instead of "fixmbr"

just thought I'd add that before people start saying it doesn't work

585566261[/snapback]

Hahaha, you beat me to it!

Yeah, Fixmbr and Fixboot both don't work. I know, I've tried several times. All they do is jack up the NTLoader.

Edited by Jstphish
is there a way to recover the winlogin.exe

585566297[/snapback]

Of course there is :) Boot into the recovery console and use this command.

expand d:\i386\winlogon.ex_ c:\windows\system32\winlogon.exe

D: = drive Xp cd is in

C: = drive Xp is installed on

Edited by Mr. Dick C. Normous
Jeez, leave it to me to have a typo in my very first HOW TO.  Mark, fix that would ya?

585566188[/snapback]

Not a problem. Done.

You should always be able to go back and edit your first post. All members are able to do this. At least that is how I understand it to work. :unsure:

And, by the way, thanks for the quick write-up! This gets asked an awful lot.

  • 3 weeks later...
Hahaha, you beat me to it!

Yeah, Fixmbr and Fixboot both don't work.  I know, I've tried several times.  All they do is jack up the NTLoader.

585566400[/snapback]

Agreed with that.

It always mess with the NTLoader.....arghhhhhh...gotta hate windows.

  • 5 weeks later...
fdisk /mbr does not work for me. I've even ran a search on my XP box for 'fdisk'...and it's not on here.

Is there a way that actually works? shall I try the 'fixmbr' command and see if that works - because I really don't wanna' mess up my system.

585823046[/snapback]

I have always used fdisk /mbr, but I pretty much stopped using Windows right about the start of the XP days, so I can't say for sure which command is supported in XP. Both are equivalent commands, so they are both safe (and set the MBR back to the MS default)

I have always used fdisk /mbr, but I pretty much stopped using Windows right about the start of the XP days, so I can't say for sure which command is supported in XP.  Both are equivalent commands, so they are both safe (and set the MBR back to the MS default)

585830160[/snapback]

If you have MS Windows 95/98/ME installed, click on Start >> Run. Type in "command", without the quotes, and press Enter. At the command prompt, type in the command "fdisk /mbr" to reinstall the Windows bootloader into the MBR.

If you have MS Windows 2000/XP installed, you will need to have the Windows Installation CD. Insert the Installation CD into your CD-ROM drive and reboot your computer. When Windows Setup loads up, follow the onscreen instructions to open the Recovery Console. At the Recovery Console command prompt, type in the command "fixmbr" to reinstall the Windows bootloader into the MBR.

Slight difference in the OS's.

Ok folks.

Fixmbr and fixboot are not working for me. It says it has revised the boot sector etc, but when I restart the computer it still says the hard drive is not bootable. Tried from the Windows XP CD. The options are limited - it won't let you run anything but what is listed under help (so, no fdisk, sys, etc).

I'm getting very frustrated. I tried reinstalling XP, but it simply copies files over to the HD, resets the computer and then tries to boot from the hard drive (which it cannot do).

I'm lost for a solution.

Ok folks.

Fixmbr and fixboot are not working for me.  It says it has revised the boot sector etc, but when I restart the computer it still says the hard drive is not bootable.  Tried from the Windows XP CD.  The options are limited - it won't let you run anything but what is listed under help (so, no fdisk, sys, etc).

I'm getting very frustrated.  I tried reinstalling XP, but it simply copies files over to the HD, resets the computer and then tries to boot from the hard drive (which it cannot do).

I'm lost for a solution.

585845486[/snapback]

I am not sure why your XP is refusing to boot. Really, all that needs to be done is get Windows to restore the MBR and you are done.

What I would recommend at thsi point (you did try a Win98 boot disk from http://www.bootdisk.com/ right?) is that you back up whatever data you can - use a Knoppix LiveCD if you must to get access to your data. Then fdisk and remove all partitions and reinstall XP completely from scratch. You may have some bad data in your partition table that prevents it from accessing the correct Microsoft data outside the MBR.

  • 3 months later...

The easiest way to fix this problem (I know, ive had to do it quite a few times) is to go on and start the installion, and format the drive. THEN go into the recovery console and in this order type fixmbr then fixboot and reinstall windows. I have not yet figured out how to keep windows on a seperate partition and have it still boot

I am not sure why your XP is refusing to boot.  Really, all that needs to be done is get Windows to restore the MBR and you are done.

What I would recommend at thsi point (you did try a Win98 boot disk from http://www.bootdisk.com/ right?) is that you back up whatever data you can - use a Knoppix LiveCD if you must to get access to your data.  Then fdisk and remove all partitions and reinstall XP completely from scratch.  You may have some bad data in your partition table that prevents it from accessing the correct Microsoft data outside the MBR.

585847112[/snapback]

dont need to start fdisk. just use the windows xp or 2000 cd and format there then reboot.

about people not getting this to work. not taking you all for stupid or anything like that, i would say check if the error says ntloader missing, if so you have to copy it from the xp cd. that is a whole other operation i dont have at hand rigth now. *there work houres are done, driving home*

If for some reason you find the need to get back to your Windows XP bootloader instead of the one installed by your Linux distro, simply follow these instructions:

1.  Boot up with your Windows XP disc.

2.  Select the option Recovery Console.

3.  At the prompt, type "fixmbr" (without the quotes of course)

4.  Restart your computer.

585565400[/snapback]

Better hope u only have on partition, or you will trash them all (well, they will exist, but u won't be able to boot them)!!! You should warn people ahead of tyme....

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
    • I still use HexChat! Not really as ancient as the 1994 AutoCAD above my post, but I have never found anything better to replace it. Yes we still operate an IRC server https://www.neowin.net/irc/ 😛 
    • At work we still have a couple of people that use a version of AutoCAD LT purchased in 1994. This predates Windows 95 and works fine on versions of Windows up to XP. Its long since run in an locked down isolated XP VM, accessible via RDP. I did install LibreCAD for them, however they said it was just too different to get to grips with. In all fairness one of them is now 75 and the other is almost 60.
    • On my music making (non internet) PC Sony Acid Pro 7.0 Adobe Audition 2015 Korg Legacy Collection Windows 7 SP1
    • Anyway to download these versions without being on the Experimental builds?
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!