[HOW TO] Get back your Windows XP Bootloader


Recommended Posts

If for some reason you find the need to get back to your Windows XP bootloader instead of the one installed by your Linux distro, simply follow these instructions:

1. Boot up with your Windows XP disc.

2. Select the option Recovery Console.

3. At the prompt, type "fdisk /mbr" (without the quotes of course)

4. Restart your computer.

Edited with correct info from the following posts...

For me and some others you might need to type "fdisk /mbr" instead of "fixmbr"

just thought I'd add that before people start saying it doesn't work

585566261[/snapback]

Hahaha, you beat me to it!

Yeah, Fixmbr and Fixboot both don't work. I know, I've tried several times. All they do is jack up the NTLoader.

Edited by Jstphish
is there a way to recover the winlogin.exe

585566297[/snapback]

Of course there is :) Boot into the recovery console and use this command.

expand d:\i386\winlogon.ex_ c:\windows\system32\winlogon.exe

D: = drive Xp cd is in

C: = drive Xp is installed on

Edited by Mr. Dick C. Normous
Jeez, leave it to me to have a typo in my very first HOW TO.  Mark, fix that would ya?

585566188[/snapback]

Not a problem. Done.

You should always be able to go back and edit your first post. All members are able to do this. At least that is how I understand it to work. :unsure:

And, by the way, thanks for the quick write-up! This gets asked an awful lot.

  • 3 weeks later...
Hahaha, you beat me to it!

Yeah, Fixmbr and Fixboot both don't work.  I know, I've tried several times.  All they do is jack up the NTLoader.

585566400[/snapback]

Agreed with that.

It always mess with the NTLoader.....arghhhhhh...gotta hate windows.

  • 5 weeks later...
fdisk /mbr does not work for me. I've even ran a search on my XP box for 'fdisk'...and it's not on here.

Is there a way that actually works? shall I try the 'fixmbr' command and see if that works - because I really don't wanna' mess up my system.

585823046[/snapback]

I have always used fdisk /mbr, but I pretty much stopped using Windows right about the start of the XP days, so I can't say for sure which command is supported in XP. Both are equivalent commands, so they are both safe (and set the MBR back to the MS default)

I have always used fdisk /mbr, but I pretty much stopped using Windows right about the start of the XP days, so I can't say for sure which command is supported in XP.  Both are equivalent commands, so they are both safe (and set the MBR back to the MS default)

585830160[/snapback]

If you have MS Windows 95/98/ME installed, click on Start >> Run. Type in "command", without the quotes, and press Enter. At the command prompt, type in the command "fdisk /mbr" to reinstall the Windows bootloader into the MBR.

If you have MS Windows 2000/XP installed, you will need to have the Windows Installation CD. Insert the Installation CD into your CD-ROM drive and reboot your computer. When Windows Setup loads up, follow the onscreen instructions to open the Recovery Console. At the Recovery Console command prompt, type in the command "fixmbr" to reinstall the Windows bootloader into the MBR.

Slight difference in the OS's.

Ok folks.

Fixmbr and fixboot are not working for me. It says it has revised the boot sector etc, but when I restart the computer it still says the hard drive is not bootable. Tried from the Windows XP CD. The options are limited - it won't let you run anything but what is listed under help (so, no fdisk, sys, etc).

I'm getting very frustrated. I tried reinstalling XP, but it simply copies files over to the HD, resets the computer and then tries to boot from the hard drive (which it cannot do).

I'm lost for a solution.

Ok folks.

Fixmbr and fixboot are not working for me.  It says it has revised the boot sector etc, but when I restart the computer it still says the hard drive is not bootable.  Tried from the Windows XP CD.  The options are limited - it won't let you run anything but what is listed under help (so, no fdisk, sys, etc).

I'm getting very frustrated.  I tried reinstalling XP, but it simply copies files over to the HD, resets the computer and then tries to boot from the hard drive (which it cannot do).

I'm lost for a solution.

585845486[/snapback]

I am not sure why your XP is refusing to boot. Really, all that needs to be done is get Windows to restore the MBR and you are done.

What I would recommend at thsi point (you did try a Win98 boot disk from http://www.bootdisk.com/ right?) is that you back up whatever data you can - use a Knoppix LiveCD if you must to get access to your data. Then fdisk and remove all partitions and reinstall XP completely from scratch. You may have some bad data in your partition table that prevents it from accessing the correct Microsoft data outside the MBR.

  • 3 months later...

The easiest way to fix this problem (I know, ive had to do it quite a few times) is to go on and start the installion, and format the drive. THEN go into the recovery console and in this order type fixmbr then fixboot and reinstall windows. I have not yet figured out how to keep windows on a seperate partition and have it still boot

I am not sure why your XP is refusing to boot.  Really, all that needs to be done is get Windows to restore the MBR and you are done.

What I would recommend at thsi point (you did try a Win98 boot disk from http://www.bootdisk.com/ right?) is that you back up whatever data you can - use a Knoppix LiveCD if you must to get access to your data.  Then fdisk and remove all partitions and reinstall XP completely from scratch.  You may have some bad data in your partition table that prevents it from accessing the correct Microsoft data outside the MBR.

585847112[/snapback]

dont need to start fdisk. just use the windows xp or 2000 cd and format there then reboot.

about people not getting this to work. not taking you all for stupid or anything like that, i would say check if the error says ntloader missing, if so you have to copy it from the xp cd. that is a whole other operation i dont have at hand rigth now. *there work houres are done, driving home*

If for some reason you find the need to get back to your Windows XP bootloader instead of the one installed by your Linux distro, simply follow these instructions:

1.  Boot up with your Windows XP disc.

2.  Select the option Recovery Console.

3.  At the prompt, type "fixmbr" (without the quotes of course)

4.  Restart your computer.

585565400[/snapback]

Better hope u only have on partition, or you will trash them all (well, they will exist, but u won't be able to boot them)!!! You should warn people ahead of tyme....

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • HONOR Robot Phone unveils first Cinematic Video at Shanghai International Film Festival by Steven Parker Global AI device ecosystem company HONOR announced on June 13 that its revolutionary HONOR Robot Phone made its professional imaging debut at the 28th Shanghai International Film Festival (SIFF), demonstrating the result of its mobile videography capabilities for the first time. As the official mobile photography and videography partner of the 28th Shanghai International Film Festival, HONOR empowers this premier cinematic event with cutting-edge mobile imaging technology. Marking the global debut of the first cinematic video it captured, Robot Phone breaks down the boundaries between mobile imaging and professional filmmaking, ushering in a new paradigm for the deep integration of technology and cinematic art. In the video published on HONOR’s official channel (above), Robot Phone was used byELLEMEN to capture cinematic video portraits for the SIFF jury members. With its exceptional stability and cinema-grade imaging capabilities, the device redefines the art of portrait filmmaking, faithfully reproducing the rich tonal gradations and nuanced color transitions associated with film photography. The result is a new level of visual sophistication, creating high-end cinematic imagery that seamlessly blends atmosphere with narrative tension. The video released for the Robot Phone showcases the powerful stabilization capabilities of its built-in gimbal system, delivering exceptionally smooth handheld camera movement while preserving full image quality. By minimizing reliance on electronic image stabilization, the device effectively avoids the image cropping and quality loss typically associated with digital stabilization methods. Representing an innovative leap in form factor, the HONOR Robot Phone features the industry's smallest titanium alloy gimbal, delivering ultra-precision, extreme flexibility, and superior stability. Driven by high-performance motors, the gimbal rises dynamically, breaking free from the physical limitations of traditional camera modules. Combined with advanced AI algorithms that enable intelligent object tracking and various movements with stable shots, the device significantly simplifies video creation and reshapes both the equipment choices and creative habits of modern users. Notably, the Robot Phone will be the first product that features the results of HONOR's strategic technological partnership with ARRI, the world-renowned designer and manufacturer of professional camera technology for cinematic storytelling. From Cannes to Shanghai, the HONOR Robot Phone continues to lead the mobile imaging industry into an entirely new stage of development. Moving forward, HONOR will leverage cutting-edge AI and mobile imaging technologies to unlock new creative possibilities and extend cinematic standards for visual expression from the world of high-end filmmaking to the next generation of content creators. Learn more about the HONOR Robot Phone here: https://www.honor.com/global/events/honor-robot-phone/
    • I'll wait for the root cause analysis. Looks like it's HP, Lenova, and certain configurations that are askew, hardly "all of windows." Time will tell.
    • Loading Topaz Photo AI freezes my system since this update...
    • I had issues with my NVME, it was running really slow (like 2/3 mb bandwidth) ... had to reverted via System Restore and all is fine now.
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      510
    2. 2
      +Edouard
      200
    3. 3
      PsYcHoKiLLa
      137
    4. 4
      ATLien_0
      91
    5. 5
      Steven P.
      83
  • Tell a friend

    Love Neowin? Tell a friend!