[HOW TO] Installing Wireless Networking


Recommended Posts

Introduction

I would like to thank Bliksem who helped getting me connected to the Internet.

This tutorial was written using Blkisem's help, and the help of google. This works with a variety of wireless cards, but for the sake of things I'm going to explain preciesly how I installed this using a Linksys WMP54G Wireless Network Card (V2). I know this looks like a long tutorial because it's as detailed as I can get it (because it's all extremely fresh in my mind).

My Relevant Specs & Info

- Fedora Core 3 (aka Red Hat 12)

- Kernel 2.6.10-1.760 (works with previous kernels, including *.770 and 2.6.11)

- Linksys WMP54G Wireless Network Card (Version 2)

- Username: djmuk (/home/djmuk/) <-- change this to your own login name where appropriate.

Step 1: Downloading & Saving

1.) Download ndiswrapper and the Linksys WinXP Drivers

2.) Do NOT extract anything at this point unless specified

3.) Save the ndiswrapper-[version_number].tar.gz file onto a Floppy, CD-R/RW or DVD+-R/RW (or other storage mediums)

3.) Open up the WinXP Driver's .zip file and save the 2 files (bcmwl5.sys & bcmwl5.inf) onto a Floppy, CD-R/RW or DVD+-R/RW (or other storage mediums)

4.) You should have 3 files on your Floppy, CD-R/RW or DVD+-R/RW (or other storage mediums) [ndiswrapper-1.0.tar.gz, bcmwl5.sys & bcmwl5.inf]

Step 2: Installation (Part 1/2)

1.) Extract the 3 files (ndiswrapper-[version_number].tar.gz, bcmwl5.sys and bcmwl5.inf) to /home/djmuk/

2.) Open up your terminal (Shortcut: F4 - if you're in the /home/djmuk/ folder)

3.) Type: su (super-user)

4.) Type your 'root account' password

5.) Type: tar -zxvf ndis (hit tab to auto-complete file name, and hit enter)

6.) Type: cd ndis (hit tab to auto-complete folder name, and hit enter)

7.) Type: make (hit enter)

8.) Type: make install

Step 3: Verification & Installation (Part 2/2)

1.) Type: ls -l /lib/modules/`uname -r`/misc/ (hit enter). This verifies the installation of the kernel module

2.) Type: whereis ndiswrapper loadndisdriver wlan_radio_averatec_5110hx (hit enter). This verifies the installation of user space utilities

3.) Type: /usr/sbin/ndiswrapper -i /home/djmuk/BCMWL5.INF (Case sensitive, if file: 'BCMWL5.INF' is in capitals in /home/djmuk/ then use capitals here)

4.) Type: ndiswrapper -l <-- That's the letter 'L' by the way (not the number one). This verifies the installation of the Windows driver

5.) Type: /sbin/modprobe ndiswrapper (hit enter)

6.) Type: ndiswrapper -m (hit enter)

7.) Type: /sbin/dhclient wlan0 (This activates the wireless connection - FINALLY!)

ALL DONE!

* There is no encryption being used at the moment. I haven't ventured that far yet ;) (but I will do when I get some sleep)

You should also note, that if you reboot your machine, you might notice there's no Internet connection.

To fix this, when you log in to the system, immediately open up the terminal and type the last command (Step 3: Part 7): (/sbin/dhclient wlan0). I'm sure there's a way to initiate this upon Start Up - but I'm still a n00b at Linux.

I hope this becomes useful for someone :)

Edited by markjensen

Enabling Encryption

Introduction

Alrighty then, Part 2 of this tutorial. The first part has no encryption (meaning, your Wireless Access Point has all security features disabled. Now it's time to enable them (after a few hours of research on google).

I'm going to write this tutorial based upon my own settings (feel free to change them).

My Relevant Specs & Info

- Fedora Core 3 (aka Red Hat 12)

- Kernel 2.6.10-1.760 (works with previous kernels, including *.770 and 2.6.11)

- Linksys WMP54G Wireless Network Card (Version 2)

- Linksys WAP54G Wireless-G Access Point (IP Address example used in browser: 192.168.2.2)

Step 1: Setup and Auto-Start on Reboot

1.) Copy & Paste the text below into a text editor (eg, "gedit"):

# NDIS Wrapper Configuration: Linksys WMP54G
 DEVICE=wlan0
 ONBOOT=yes
 BOOTPROTO=dhcp
 TYPE=Wireless
 MODE=Managed
 SSID="DjmUK_54G"
 CHANNEL=11
 USERCTL=yes
 PEERDNS=no
 KEY=xxxxxxxxx
 RATE=Auto
 NICK=wlan0

2.) Save the file to: /etc/sysconfig/network-scripts/ with the filename: ifcfg-wlan0.

Step 2: Editing File: ifcfg-wlan0

1.) Editing the file. Firstly open up your Access Point into a browser http://192.168.2.2 (I used my WinXP box to do this). The important settings to change (just copy the settings you see in your browser):

- SSID="DjmUK_54G"

This is the name of your wireless network which MUST match your Access Points SSID

- CHANNEL=11

Depends on your location, I use 11 because I'm in Europe

- KEY=XXXXXXXXXX

Take a look at your 'Security Settings', I'm using a 'Security Mode of WEP @ 64-bits / 10 hex digits' (because 128-bit slows down the network). Type in your key here, NOT the passphrase! the generated key. I had four to choose from, so I made sure I was broadcasting the chosen key

- RATE=Auto

You can change this to your actual bandwidth (eg, 54G), but auto is the easiest method that works just fine with me

Step 3: Network Settings and Network Restart

1.) In Fedora, go to "Start > System Settings > Network", and in the DNS Tab:

- Hostname: localhost Unless you're a web server

- Primary DNS: 192.168.1.1 Your Gateway address (your Access Point via a browser will tell you this)

- Secondary DNS:

- Tertiary DNS:

- DNS Search Path:

* I left some fields blank above because I'm not running a web server so I don't need to worry about those.

2.) Restart your network, and you have two options to do this.

-- In 'Terminal' you can type: service network restart

-- Network Configuration (Decativate device, Activate device).

3.) Now test it all. Load up any web page ;)

ALL DONE!

The above works for me, so hopefully it will work for someone else out there and hopefully with little to no modifications.

Kernel Updates Broke My Network Connections

Introduction

Okay, this is my last article on this subject (all this Linux is a nice learning curve, and I'm still learning).

Basically, I just upgraded my kernel (via yums rpm):

From: 2.6.10-1.760

To: 2.6.10-1.770

However, on reboot the Internet was broken. But don't worry, you don't need to go through all these steps again because the hardware is installed and configured correctly.

My Relevant Specs & Info

- Fedora Core 3 (aka Red Hat 12)

- Kernel 2.6.10-1.770 <-- NEW VERSION BABY!

- Linksys WMP54G Wireless Network Card (Version 2)

- Linksys WAP54G Wireless-G Access Point

Step 1: Why Is It Broken?

1.) Because that ndiswrapper module you compiled and installed was for the previous kernel, so you're gonna' have to recompile a new one - and that's all there is to it.

2.) "Step 2: Installation (Part 1/2)" needs to be followed - but not in so much detail, so here goes.

Step 2: Recompiling

Let's say you've kept the ndiswrapper folder in your user space /home/djmuk/ (if not, then go sort it out by un-tar'ing it etc.)

01.) Load up the terminal

02.) Type: su

03.) Type: cd /home/djmuk/ndiswrapper-1.0/ Or wherever you've un-tar'ed the ndiswraper module

04.) Type: make

05.) Type: make install

06.) Type: ndiswrapper -l Note the name of the driver (in my case 'bcmwl5')

07.) Type: ndiswrapper -e bcmwl5 This removes that driver (so watch your spelling)

08.) Type: /usr/sbin/ndiswrapper -i /home/djmuk/BCMWL5.INF reinstalls the driver

09.) Type: ndiswrapper -l Verification

10.) Type: /sbin/modprobe ndiswrapper

11.) Type: ndiswrapper -m

12.) Type: /sbin/dhclient wlan0

13.) Type: service network restart

ALL DONE!

There we go, just a simple case of recompiling the ndiswrapper module for your new kernel, and reinstalling the module. All your previous settings and configurations (including encryption) are still intact.

Edited by markjensen
  • 2 weeks later...

I would like to offer another alternative to using ndiswrapper, called madwifi. I find it is much faster and more convenient especially when theres security keys involved.

It *should* work on any card that uses an atheros chipset.

This worked for me on fedora core 3 770 with a WPC55AG card:

1. get the madwifi drivers and libradies:

http://dl.atrpms.net/production/packages/f...fc3.at.i686.rpm

http://download.atrpms.net/production/pack...fc3.at.i386.rpm

2. install the rpms:

at terminal:

cd /download_location/

su

rpm -i madwifi-kmdl-2.6.10-1.770_FC3-0.9.4.12-15.rhfc3.at.i686.rpm

rpm -i madwifi-0.9.4.12-15.rhfc3.at.i386.rpm

cd /sbin

./modprobe ath_pci

3. configure your card the way you want it:

most configurations can use the built-in network config utility:

-open it up, and click to create a new device config.

-select you options for ip, dhcp, etc

-select "managed" mode

-select any othe config you need, like WEP key, if you use one.

-save

-restart "network" from applications>system settings>server settings>services

if you use a WEP key in an open system, i have found that the built in configurator has problems since it specifies "restricted" as the authentication mode, so you can do this:

-go to a terminal:

su

cd /sbin

./ifconfig ath0 up

./iwconfig ath0 key open [1] 7E0355BA7E

./dhclient ath0

you can stick all this stuff in a script or something if you want.

This config gives me fast authentication and good speed (it correctly uses 54Mb/s when available)

Here is a nice guide on how to get ndiswrapper working with *all* linux distros \

You must have the wireless tools installed

1: extract tar (kernel 2.4.* or lower needs ndiswrapper .12)

2: cd /path/to/ndiswrapper/source

3: make

4: su

5. make install

6. modprobe nidwrapper

7. ndiswrapper -i /path/to/win/driver

8. ndiswrapper -l [check that hardware is present]

9. iwconfig (make sure you see the card)

10. ndiswrapper -m

11. iwlist wlan0 scan (shows wireless networks (essid))

12. iwconfig wlan0 mode [network mode usually] managed

13. Then run dhcpcd wlan0

key [encription key] 48143525698

essid [network name] DLink

so you might have

iwconfig wlan0 mode managed

iwconfig wlan0 key 4812534656

iwconfig wlan0 essid DLink

How to get ndiswrapper working on startup:

There are many ways but theres nothing that exact. Different Distros have their way, but you can make a script in /etc/rc.d/rc.wlan0 and then have a some file call it

My /etc/rc.d/wlan0 looks like

#!/bin/sh
#/etc/rc.d/wlan0
echo "Starting Wireless Networking....."
modprobe ndiswrapper
sleep 1
iwconfig wlan0 mode Managed
iwconfig wlan0 essid DLink
sleep 1
dhcpcd wlan0
echo "Wireless Networking Started!"

At this time I'm working on remaking my script work better like to search for a network before it sets the essid etc...

Hope you found this useful

Didn't I already do this :huh:

Slightly more detailed and specifically for FC3, but reports show that it works on a lot of distros out there:

[HOW TO] Fedora 3: Installing Wireless Networking

Well, we now have two tutorials - if one doesn't work then the other's bound to :rolleyes:

  DjmUK said:
Didn't I already do this :huh:

Slightly more detailed and specifically for FC3, but reports show that it works on a lot of distros out there:

[HOW TO] Fedora 3: Installing Wireless Networking

Well, we now have two tutorials - if one doesn't work then the other's bound to  :rolleyes:

585656664[/snapback]

Well kinda mine short a sweet

and it tells how to load the connection at startup using a script important to gentoo, slack, arch, maybe debian

Both of those procedures could be useful, and since they augment and compliment each other, let me merge them into one larger thread for people to go to when they are looking for a guide. (Y)

  wicker_man said:
Nice guide, thanks a lot. Shame though we have to go through all this - a regular user won't be able to handle that  :no:

585689939[/snapback]

Well it's all about the 1st, 5th & 6th posts. The 2nd & 3rd are optional extras. Just follow either #1, #5 or #6 and that's all you'll need to get online (as long as basic security isn't an issue).

  Jayzee said:
What about WPA encryption settings!? This guide bases on WEP encryption, which anybody can crack within 5 hours..  :pinch:

585690394[/snapback]

Some drivers are supported by wpa-supplicant, which is configured through a separate config file.

  Jayzee said:
What about WPA encryption settings!? This guide bases on WEP encryption, which anybody can crack within 5 hours..  :pinch:

585690394[/snapback]

WPA - hmm, never looked into that. I've always gone with WEP (because I know how to), but I'll have to look into WPA encryption sometime, once I've researched into 'which is more secure'.

  tsukikage said:
I would like to offer another alternative to using ndiswrapper, called madwifi.  I find it is much faster and more convenient especially when theres security keys involved.

It *should* work on any card that uses an atheros chipset.

This worked for me on fedora core 3 770 with a WPC55AG card:

1. get the madwifi drivers and libradies:

http://dl.atrpms.net/production/packages/f...fc3.at.i686.rpm

http://download.atrpms.net/production/pack...fc3.at.i386.rpm

2. install the rpms:

at terminal:

cd /download_location/

su

rpm -i madwifi-kmdl-2.6.10-1.770_FC3-0.9.4.12-15.rhfc3.at.i686.rpm

rpm -i madwifi-0.9.4.12-15.rhfc3.at.i386.rpm

cd /sbin

./modprobe ath_pci

3. configure your card the way you want it:

most configurations can use the built-in network config utility:

-open it up, and click to create a new device config.

-select you options for ip, dhcp, etc

-select "managed" mode

-select any othe config you need, like WEP key, if you use one.

-save

-restart "network" from applications>system settings>server settings>services

if you use a WEP key in an open system, i have found that the built in configurator has problems since it specifies "restricted" as the authentication mode, so you can do this:

-go to a terminal:

su

cd /sbin

./ifconfig ath0 up

./iwconfig ath0 key open [1] 7E0355BA7E

./dhclient ath0

you can stick all this stuff in a script or something if you want.

This config gives me fast authentication and good speed (it correctly uses 54Mb/s when available)

585637315[/snapback]

Thank you so much for this. This made my wireless work flawlessly on my Toshiba laptop! GREAT JOB!

  • 4 weeks later...
  • 4 weeks later...

One thing that ive never figured out ( until recently )how to get working was WPA Supplicant with NDIS Wrapper to load automatically on boot.

Open up the interfaces file in

/etc/network/interfaces

Make sure you have these lines in there

auto wlan0
iface wlan0 inet dhcp
pre-up /usr/sbin/wpa_supplicant -Bw -Dndiswrapper -iwlan0 -c/etc/wpa_supplicant.conf
post-down killall -q wpa_supplicant

Just thought I'd add that, would have made my life soo much freaking easier if I knew how to set that up from the start.

  • 1 month later...

I think I figured out how to get my WLAN working, but not set for automatic startup and was setup with the native drivers instead of ndiswrapper. I noted that quite a few WLAN cards include the Linux drivers, but arc4 and/or crc32 are required. Those crypto modules can be found in /lib/modules/(your kernel version)/kernel/crypto. But if only I could find out how to get it to work for automatic startup and find a GUI WLAN monitor, I'd be all set and then, I'd be able to post a HOWTO on that.

DjmUK:

I'm having a problem with Part 7 on Step 2 of the first post of this topic. I'm extremely new to Linux and have Fedora Core 4. I'm trying to get my Linux card to work on this thing. I do an lspci and come up with the following (just for the sake of having posted as much info as possible)

  Quote
00:0a.0 Network controller: Broadcom Corporation BCM4306 802.11 b/g Wireless LAN Controller (rev03)

So I go to do this install on my nix box and get to this part

  Quote
[root@localhost ndiswrapper-1.2]#

and type in the word 'make' to get something along the following output (I had to write it down seeing as how I have no net connection).

  Quote
make -C driver

make [1]: Entering directory /root/Desktop/ndiswrapper-1.2/driver'

Can't find kernel sources in /lib/modules/2.6.11-1.1369_FC4/build;

give the path to kernel sources with KSRC=<path> argument to make

make[1]: *** [prereq_check] Error 1

make[1]: Leaving directory '/root/Desktop/ndiswrapper-1.2/driver'

make: ***[all]Error 2

[root@localhost ndiswrapper-1.2]#

Someone please tell me what this means? Why am I getting an error?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • LibreOffice 25.2.4 by Razvan Serea LibreOffice is the free power-packed Open Source personal productivity suite for Windows, Macintosh and Linux, that gives you six feature-rich applications for all your document production and data processing needs: Writer, Calc, Impress, Draw, Math and Base. Support and documentation is free from our large, dedicated community of users, contributors and developers. You, too, can also get involved! Choosing Between LibreOffice Still and LibreOffice Fresh: LibreOffice Still is a good choice if you value stability, a longer support cycle, and a more conservative approach to software updates. It's suitable for businesses and organizations where reliability and compatibility are crucial. LibreOffice Fresh is ideal if you're an enthusiast or an early adopter who wants to stay on the cutting edge of LibreOffice development and is willing to accept more frequent updates and occasional minor issues. Features: Writer is the word processor inside LibreOffice. Use it for everything, from dashing off a quick letter to producing an entire book with tables of contents, embedded illustrations, bibliographies and diagrams. The while-you-type auto-completion, auto-formatting and automatic spelling checking make difficult tasks easy (but are easy to disable if you prefer). Writer is powerful enough to tackle desktop publishing tasks such as creating multi-column newsletters and brochures. The only limit is your imagination. Calc tames your numbers and helps with difficult decisions when you're weighing the alternatives. Analyze your data with Calc and then use it to present your final output. Charts and analysis tools help bring transparency to your conclusions. A fully-integrated help system makes easier work of entering complex formulas. Add data from external databases such as SQL or Oracle, then sort and filter them to produce statistical analyses. Use the graphing functions to display large number of 2D and 3D graphics from 13 categories, including line, area, bar, pie, X-Y, and net - with the dozens of variations available, you're sure to find one that suits your project. Impress is the fastest and easiest way to create effective multimedia presentations. Stunning animation and sensational special effects help you convince your audience. Create presentations that look even more professional than the standard presentations you commonly see at work. Get your collegues' and bosses' attention by creating something a little bit different. Draw lets you build diagrams and sketches from scratch. A picture is worth a thousand words, so why not try something simple with box and line diagrams? Or else go further and easily build dynamic 3D illustrations and special effects. It's as simple or as powerful as you want it to be. Base is the database front-end of the LibreOffice suite. With Base, you can seamlessly integrate into your existing database structures. Based on imported and linked tables and queries from MySQL, PostgreSQL or Microsoft Access and many other data sources, you can build powerful databases containing forms, reports, views and queries. Full integration is possible with the in-built HSQL database. Math is a simple equation editor that lets you lay-out and display your mathematical, chemical, electrical or scientific equations quickly in standard written notation. Even the most-complex calculations can be understandable when displayed correctly. E=mc2. LibreOffice also comes configured with a PDF file creator, meaning you can distribute documents that you're sure can be opened and read by users of almost any computing device or operating system. LibreOffice also comes configured with a PDF file creator, meaning you can distribute documents that you're sure can be opened and read by users of almost any computing device or operating system. Download: LibreOffice 64-bit | LibreOffice 32-bit ~300.0 MB (Open Source) View: LibreOffice Website | Screenshot | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I'm not sure why, but for some reason I think that if they are deciding to use the year for the version history they should use the whole year (i.e. iOS 2026).
    • Here's why it makes sense to name it iOS 26 and why it doesn't by Aditya Tiwari It has been almost 18 years since Apple launched the first version of its popular mobile operating system alongside the original iPhone. Recent reports and rumors circulating on the web suggest that the company is all set to unveil a major overhaul for iOS 19 at this year's WWDC keynote. There is something that baffled many when they found that the Cupertino giant is reportedly planning to rename iOS 19 to iOS 26. Yes, a company like Apple skipping eight versions for iOS is enough to leave users with a "why?" expression on their face. However, even if Apple pulls it off, there are two sides to the coin. Why it makes sense to call it iOS 26 There are several reasons why calling it iOS 26 instead of iOS 19 isn't as weird as it sounds. To begin with, it's something that has been done in the past. Samsung is a well-known example when we think about renaming device lineups and skipping version numbers. Samsung launched the Galaxy S20 series in 2020. But what was its predecessor? Galaxy S19? No, it was the Galaxy S10. The South Korean giant renamed its device lineup and aligned it with the year of launch, jumping ten versions in the process. So, someone viewing a Galaxy S23 can easily determine that the device was launched in 2023. It also gives them a feeling that they are using the 'latest and greatest' product. On the flip side, a device from the previous year may feel outdated, potentially motivating them to upgrade. Skipping version numbers isn't fun and games for everyone. Microsoft became the butt of jokes when it skipped Windows 9 and announced that Windows 8.1 will be upgraded to Windows 10 (that too in 2015). Windows 10 was thought to be "the last version of Windows", but things turned out differently. Apple's case would be a bit different, where the iOS version number is one year ahead. So, iOS 26 will release in 2025, iOS 27 in 2026, and so on. This approach is similar to how game companies like Electronic Arts name their gaming titles. Although it may seem off track, the naming scheme aligns with Apple's development schedule. The company typically announces new iOS versions at WWDC in June and rolls them out to the public in the fall season. After that, it continues to push incremental updates through the following year. In other words, a particular iOS version lives on your iPhone for a quarter of the launch year and about nine to ten months in the following year. Meanwhile, Samsung releases new Galaxy S devices at the start of the year, so it makes more sense to align their name with the current year. Not just iOS 26, reports said that Apple will streamline its confusing software naming system by renaming almost all of its operating systems to a single version. So, there will be iPadOS 26, macOS 26, tvOS 26, and watchOS 26 instead of iPadOS 19, macOS 16, tvOS 12, and so on. While the big move will make things easier for users, it will also highlight the work Apple has been doing to unify its software experience across devices. iOS and iPadOS have been related to each other from the beginning, but macOS gained ARM support in 2020 and began incorporating iOS-like UI elements. Apple has already developed a suite of Continuity features that enable different Apple devices to work together. macOS 14 Sonoma further bridged the gap between iPhone and Mac in 2023 with a revamped widgets picker UI, which allows access to and syncing with widgets stored on your iPhone. New widgets introduced in macOS 14 are interactive, similar to those on iPhone. They let you do stuff like checking off reminders, playing or pausing media, accessing smart home controls, and more. Apple's iOS 26/iOS 19 would be the second major naming shake-up in the history of iOS. The first one was when Apple renamed the operating system from iPhone OS to iOS in June 2010. iOS 26 is expected to be the biggest update in years, reportedly featuring a 'dramatic' glass-like UI overhaul, a revamped Camera app, live translation for AirPods, a new gaming app, and a new set of accessibility features. The glass-like design, first introduced on Apple's Vision Pro headset, is expected to make its way to tvOS and watchOS. Why doesn't it make sense to call it iOS 26 It already feels a bit awkward when you realize that the iPhone 16 runs iOS 18, for whatever reason, when the first iterations of both iPhone and iOS arrived in the same year. Adding eight more digits to the iOS version number will make it sound even weirder. The 19th generation of iPhone's operating system will be called iOS 26. Imagine buying an iPhone 17 later this year, and it runs iOS 26 out of the box. However, there are a couple of things Apple can do to tone down the awkwardness. Perhaps Apple can rename the iPhone series and start calling it iPhone 26 to match its software counterpart. A far-fetched and even more unlikely option is to drop version numbers from the iPhone's name entirely. Apple is already doing it for its tablets (iPad, iPad Pro, and iPad Air) and its Mac computers. Therefore, it won't be an issue once the users absorb the initial shock of the announcement. But we can't ignore that not having a version number tied to a product has its downsides. These are all speculations anyway. Whatever happens, Apple fans will get over it and learn to live with it, like they are living with the hopes of an upgraded Siri and AirPower to charge their Apple devices together.
    • I'd prefer the disclaimer being more transparent by putting it above the article.
    • dBpoweramp Music Converter 2025-06-05 by Razvan Serea Audio conversion perfected, effortlessly convert between formats. dBpoweramp contains a multitude of audio tools in one: CD Ripper, Music Converter, Batch Converter, ID Tag Editor and Windows audio shell enhancements. Preloaded with essential codecs (mp3, wave, FLAC, m4a, Apple Lossless, AIFF), additional codecs can be installed from [Codec Central], as well as Utility Codecs which perform actions on audio files. After 21 days the trial will end, reverting to dBpoweramp Free edition (learn the difference between Reference and dBpoweramp Free, here). dBpoweramp is compatible with Windows 10, 8, 7, Vista, both 32 and 64 bit. dBpoweramp Music Converter features: Convert audio files with elegant simplicity. mp3, mp4, m4a (iTunes / iPod), Windows Media Audio (WMA), Ogg Vorbis, AAC, Monkeys Audio, FLAC, Apple Lossless (ALAC) to name a few! Multi CPU Encoding Support Rip digitally record audio CDs (with CD Ripper) Batch Convert large numbers of files with 1 click Windows Integration popup info tips, audio properties, columns, edit ID-Tags DSP Effects such as Volume Normalize, or Graphic EQ [Power Pack Option] Command Line Encoding: invoke the encoder from the command line DSP Effects - process the audio with Volume Normalize, or Sample / Bit Rate Conversion, with over 30 effects dBpoweramp is a fully featured mp3 Converter dBpoweramp integrates into Windows Explorer, an mp3 converter that is as simple as right clicking on the source file >> Convert To. Popup info tips, Edit ID-Tags are all provided. dBpoweramp Music Converter 2025.06.05 changelog: Darkmode added Core Converter Debug log dumps ID Tags written VST Effect Folders dialog fixed missing InitCommonControls would not show correctly FLAC/Ogg/Opus/etc - allows editing of CDTOC ID Tag CD Ripper secure ripping log where shows TOC was not showing CD Extra correctly CD Ripper was incorrectly setting data track length on main display (for certain drives) CD Ripper internally better handling of corrupt TOCs CD TOC to Tag was incorrectly adding 150 to CD Extra disc CD Ripper shows "AccurateRip Unconfigured" in rip status rather than "not in accuraterip" if unconfigured CD Ripper art paste accepts https CueSheet added as standard - log file written to same folder as cue and folder.jpg AIFF internal code merge (macos >> windows) Download: dBpoweramp Music Converter R2025.06.05 | 82.2 MB (Shareware) View: dBpowerAMP Music Converter Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      abortretryfail earned a badge
      Week One Done
    • First Post
      Mr bot earned a badge
      First Post
    • First Post
      Bkl211 earned a badge
      First Post
    • One Year In
      Mido gaber earned a badge
      One Year In
    • One Year In
      Vladimir Migunov earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      snowy owl
      255
    3. 3
      +FloatingFatMan
      252
    4. 4
      ATLien_0
      227
    5. 5
      +Edouard
      191
  • Tell a friend

    Love Neowin? Tell a friend!