• 0

Cherry OS Trial Available!


Question

Recommended Posts

  • 0
thats a fat lie. it works flawlessly on a clean system (as everyone else has stated here so far)

(edit: works means that it actually starts. i didnt say that it was successful booting panther, or that it was fast while running it)

what you are claiming is that the software wont even start on your three computers. the little sidenote about you formatting one of them is a more obvious lie, or the formatted computer just doesnt have what it takes. who formats a computer just to try out cherryOS? it mustve been one which you didnt care about, which means that its specs are lower than the requirements (which means that it likely wont work because of that)

anyways, im sure that out of the 20-some-odd-thousand people who tried it out, maybe a handful got the same error you did. maybe.

and to end on a stern note: your comment was repulsive, unnecessary, and downright rude.

585590646[/snapback]

oh , im am so sorry. when you assume you make an ass of u and me.

3.2 HT P4 1 gig pc400 ram, 250 sata hard drive. btw. yea, those specs suck huh ?

hmm...

people on this forum can be quite sensetive. didnt know i had to wear my gloves when i type responses. ill be nicer next time.... asshat

  • 0

Networking works fine on my machine. You need to do as the readme says in regards to ICS and assigning an ipaddress to the virtual Cherry OS network adapter.

You also need to enable networking in your profile.

Will post a screenshot when I get home from work. :ninja:

  • 0
Networking works fine on my machine. You need to do as the readme says in regards to ICS and assigning an ipaddress to the virtual Cherry OS network adapter.

You also need to enable networking in your profile.

Will post a screenshot when I get home from work. :ninja:

585593713[/snapback]

Yes same here. Just follow the Cherry OS readme file regarding the networking and you should be fine.

  • 0

anyone tried the cherry on a non-english windows xp sp2 because my korean xp does not seem to work with the cherry

it installs then when i run the program it comes with an error - the one many had but fixed by changning the compatibility to win 2000 but i tried but still seems to not work on my laptop

i use a centrino 1.5 512mb

anyone have solution?

  • 0

Posting from safari in Mac OS X here ! bypassed the install with my PearPC .img because i'm a warez monkey

The speed (or lack of) is bearable.

For me its about 50% faster than PearPC 0.3.1 was

It feels like using a 333 MHz with 96 MB ram in Windows XP

I have a Athlon XP 2200+ with 512 MB ram

Faster than PearPC ?

yes

80% of my 2200+ equivalent to a PowerPC ?

oh no

worth 50$ ?

not with this speed. I'm not saying they're stupid and shouldd make it faster, because I guess this is just as much as an emulator can do, espacially from a x86 to a G4.

excuse the typos, the text that I type appears like 3 seconds after I type it

  • 0
According to the PearPC developer's mailing list, the guy who created the AltiVec (G4) patch is already contacting the EFF to ask for legal advice since they have used his code without permission.

585591478[/snapback]

Good news :) Maybe I'll make a donation later tonight

  • 0

Ok so really this is aimed at devolpers and not for everyday use? Or people interested in buying a mac? Sounds like good news as it could boost sales for Apple, but I don't think they will be too happy. Either bought over by Apple or shut down just like Y'z Dock was...

Interesting piece of software though, I had never heard of it :alien:.

BTW any ideas if Tiger will run on it? Or is it only designed to run Panther?

Edited by PlainLazy
  • 0

Quote from: http://www.artworxinn.com/alex/arben.htm

"So, Arben finally released his "emulator". Now he's also ripping off OpenVPN's license as well, and from what I hear he's also ripped off the explorer application for his drag/drog feature. Amazing, simply amazing. You'd think that Arben has something pathological about his lying, wouldn't you? Anyway, just for ****s and giggles I decided to put together a Visual Basic 6.0 app that does exactly the same thing that Arben does, using his CherryOS (read: PearPC with all the ppc references replaced with cos) replaced. Grab the Exe and the source here: You'll need to have CherryOS in C:\CherryOS and also you'll have to place the "hijack" file in C:\CherryOS as well. The hijack file is just his doctored ppcconf file. Modify it to fit your configuration. Get my version of CherryBS here:

http://www.artworxinn.com/alex/CherryBS.zip

Finally, have I mentioned how I discovered that Arben has simply replaced all the meaningful <error> and <warning> messages with simply that and oopps::? Pretty retarded. In what little time I had, I restored there meaning and discovered that CherryOS still boots up exactly the same way, with MAC/IO errors (specifically mine from my sound code) included. Now its personal!"

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft admits one of the most crucial Outlook features is currently broken by Sayan Sen Microsoft is making some decent progress when it comes to Windows 11. Recently we have confirmed reports of some rather useful improvements landing in the next version of the OS, 26H2, wherein GPU driver TDR crashes may finally be fixed, plus the company is also allowing users to disable web content on the Search. On the Outlook front though things have not been so rosy. Last month in May we reported several problems affecting basic functionalities on the app. These included a problem where documents would open blank or corrupt themselves. Following that, Quick Steps, a very useful feature, would no longer work correctly, and finally, Microsoft acknowledged a problem wherein images would fail to load up properly inside the email. Microsoft had resolved those bugs later and almost exactly a month after we reported on them, the company has now admitted a new similarly basic issue, this time on Macs. Users recently started noticing that Outlook would no longer display email threads properly as the original message itself was not displayed. An affected user Tsoumpas, C (ngmb) nicely described the problem in a forum post they made on Microsoft's site. They wrote: "Description of the issue: After updating Outlook for Mac [Version 16.110 (26061317)] on 18/6/2026, replying to any email no longer includes the original message in the reply window. Prior to the update, replies correctly contained the original email text below my response. Expected behavior: The original message should be included in the reply, as in previous Outlook versions and according to the configured reply settings. Actual behavior: The reply window contains only a blank composition area (or only my response), with none of the original email text included." Obviously this must be a highly frustrating for users as noted by several in that thread. The post, at the time of writing, has also been upvoted by more than 40 users indicating that is a fairly widespread bug. Thankfully Microsoft seems to have acknowledged the problem right around that time as it opened a new issue on its official website. In the support article, the company recommends switching to Outlook for Mac from the legacy app, where the problem appears to be happening.
    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!