Macintosh and Linux


Recommended Posts

I've been wanting to put Linux on my iMac for a while now, but I get confused with all the distro options out there, and I've heard that not all of them will run on my computer.

Hardware Overview:

Machine Model: iMac

CPU Type: PowerPC G4 (2.1)

Number Of CPUs: 1

CPU Speed: 800 MHz

L2 Cache (per CPU): 256 KB

Memory: 512 MB

Bus Speed: 100 MHz

Boot ROM Version: 4.4.5f3

Serial Number: W824628KN0S

Any suggestions on a distro, considering I have no Linux experience.

Link to comment
https://www.neowin.net/forum/topic/298885-macintosh-and-linux/
Share on other sites

macs arent the bet place to start using linux in. the ppc distros arent as mature as most of the x86 ones.

there is yellowdog, and i think there is also ubuntu. there is gentoo for macs as well, but probably not a very good idea for a noob. yellowdog is probably the best choice at the moment.

if you have vmware/virtualpc(although i dont htink virtual pc runs linux too well), you can try some of hte x86 distros like mandrake and fedora to get your feet wet.

macs arent the bet place to start using linux in. the ppc distros arent as mature as most of the x86 ones.

there is yellowdog, and i think there is also ubuntu. there is gentoo for macs as well, but probably not a very good idea for a noob. yellowdog is probably the best choice at the moment.

if you have vmware/virtualpc(although i dont htink virtual pc runs linux too well), you can try some of hte x86 distros like mandrake and fedora to get your feet wet.

585644433[/snapback]

wtf are you talking about ?? most distro have a ppc port which is just as uptodate as their x86 conterpart (mandrake has a ppc version)

almost all good distros have PPC support. yellowdowlinux is the most famous for getting MAC hardware things working (almost all ) and others do good too.

again i will suggest ubuntu ( as i do on other threads) if you are new to this and Gentoo if you have time and enthusiasm for linux.

Edit :- linus is doing same with his G5 .. running linux on it.. but which distro is TOP SECRET.

Edited by kyro

All distros (that i know of) have an optimized version to run on ppc. Not

just the kernel but all of the apps that come with it. Those hardware specs are pretty

fine to run any distribuiton of linux with the full set of apps WM's and all you need to

make that machine a Linux desktop (guessing here you intend to use it as a desktop). In

fact the G5 processor (well the latest ones) are known to run graphical tasks faster

(due to their design and optimized architecture) when compared to the standard X86 or even

64-bit processor. So go ahead and pic a distro of yor choice :)

I have some experience with running Linux on Mac. I have gentoo running on a beige g3 desktop (266mhz) and a 8600 w/g4 400mhz upgrade. I must say Gentoo was the best I could get for those machines. Gentoo does not get in the way, and you got whatever application you need in portage (and that is a real savior when ppc patches are needed and such). It may initially take some time to set up, but it is worth it.

Linus has stated in the past that he has used a few distros. These usually depend on his work environment. Although he has mentioned that he uses SuSE at home.

Why on earth would anyone want to put Linux on a Mac

A number of reasons. Perhaps, oh, I dunno, prolong the lifespan of the hardware? Not all Macs can run OSX.

Why would you wanna run it on an Xbox or PS2 (w/HDD)? Same reason(s).

I've tried getting Gentoo, but all the sites I try to download it from are unavailable and I can't tell which BiTorrent link I need, any suggestions, I want to try and avoid buying the CDs myself.

585650356[/snapback]

http://www.gentoo.org/main/en/mirrors.xml

None of these work for you?

He should have his own distro  :)

585646596[/snapback]

first, he doesnt have enough time.

second, it goes against the whole idea of linux. everyone would use LinusOS just because he made it, killing choice.

"That would own"

^proof. hes already switched to an OS that doesnt even exist :p

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
    • Seems like Neowin has transitioned into being simps for the white house. I can't find a review for the last UFC games that came out.
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!