Gapless Winamp output without the use of a plugin.


Recommended Posts

I am a very big Pink Floyd fan. I pretty much listen to them everyday of the week.

They are also the only band that has more than 1 album that I love every song on.

The only problem is that most audio players have a small gap between songs, and when you're listening to Pink Floyd it can ger really annoying.

I tried many plugins but all of them didn't work too well and they didn't allow me to use my other DSP plugins.

I then started messing around with Winamp and found the trick to doing this without a plugin.

I only did this in Winamp 5 but it should work on just plain old 2.

Lets get on with the guide now.

1)Open Winamp and right click "Options>Prefrences" or just press ctrl+p

2)In the treeview on the side look for the group titled Plug-Ins. In that group there should be an Output selection. Click it.

3)You should now see a box in the area next to the treeview. In that box there should be things that say "Nullsoft Disk Writer plug-in" and "waveOut output". Look for one that says "Direct Sound output". Click it and then press the configure button at the bottom of the window.

4)A new window should've popped up. Look on the top of it and click the tab "Buffering". This is the final part. all you need to do is Adjust the Buffer-Ahead on Track change to a high number.

There are 3 slider bars that allow you to adjust the Buffer settings.

Buffer Length

This adjusts the length of the buffer. This also limits the Prebuffer and Buffer-ahead.

Example: If I had a Buffer Length of 2400 ms then my Prebuffer and Buffer-Ahead could only go from a range of 0 ms - 2400 ms.

Prebuffer on start/seek/underrun

This tell Winamp how much data to eat before it outputs sound. I don't really understand what that means, so I can't inform you on this.

The suggested amount for this is 500 ms - 1000 ms.

Buffer-Ahead on track change

This is what we want to change. This tells Winamp when to start reading the next song to get a gapless transition. For me, I just set it to 5000 ms (5 seconds) but that is a bit to high for some people. I'd say anywhere from 1000 ms to 5000 ms is a good range. If you have low memory, a slow computer, or and outdated one, then set it lower, but not to low, or else it'll still have gaps.

The way this works is like this.

Example: If I set the Buffer-Ahead to 5000 ms, then Winamp will start reading the next song where the current song had 5 seconds left until it ends. This make it so winamp can trnasition them smoothly.

After that is all done, click the apply button on the window and then close the propterites window. Try it out! open two songs and set it near the end. If it worked then there should be no gap.

Waluha!

You know, I was wondering the same thing as you were and I too decided to fiddle around with those settings, because I have alot of Game soundtracks that loop. When I did it though I didnt think it was the best way to it though. Seems I was wrong.

Good stuff.

Oh, Ill also point out, It should be fairly obvious, but you cannot set the Buffer-Ahead any higher than the max amount winamp is allowed to buffer tracks. :D

which is what Dazza said.

OK folks, let's get this right:

When you get to the buffering tab, Whatever the value for "Buffer length" is is going to be the *MAX* you can make the "Buffer-ahead on track change" setting. So, if you leave "Buffer length" at 2000 you can't set "Buff-ahead ..." to any higher than 2000.

That is what Kenta meant when writing

  "Kenta" said:
Buffer Length

This adjusts the length of the buffer. This also limits the Prebuffer and Buffer-ahead.

Example: If I had a Buffer Length of 2400 ms then my Prebuffer and Buffer-Ahead could only go from a range of 0 ms - 2400 ms.

HTH

Hmmmm - RIO Karma - =costs money = I have to spend money

WinAmp = free = I can listen to it through my 210 Watt Receiver in my AV system which I have my computer routed through and add effects, set EQ, etc.... - And I don't have to pay for it.

Guess which one *I* am going for.

What's funny is that you're still using a plugin.

It's just that they plugin you're using *comes* with Winamp. =)

What you mean to say is that you're not downloading *another* plugin.

Just about *everything* in Winamp is plugin based. Input plugins, output plugins, DSP plugins, visualization plugins...

If you didn't have any plugins, Winamp wouldn't do very much...

Dazza: I daid it, but it wasn't in a very good position to read it from.

Superkicky: I could send you the updated Direct Sound output plugin to see if that works.

If you want it just PM me.

semifamous: Yes your right, but it's the way out language developed.

Think of it this way. If you had hot coffie and let it set on the counter for a few hours and then drank it, you'd say it's cold.

Then you do the same thing, but with an ice cold soda. When you go to drink it, you say it's warm, even though the soda and coffie are about the same tempature.

The same can be said with the included plugins and the 3rd Party plugins. But if we got technical, yes, they are just plugins.

I still notice one "little" gap in live recordings, to fix it, choose "remove silence at the beginning / end of track" in "other" tab.....

Use this trick, plus Kenta Guide, and you will no hear gaps between songs.

Edited by retri
  • 1 year later...
  • 1 month later...
  • 2 years later...
  • 2 months later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I would suggest Ubiquiti Cloud Gateway Fiber + U7 Pro XGS   https://store.ui.com/us/en/category/all-cloud-gateways/collections/cloud-gateway-fiber/products/ucg-fiber https://store.ui.com/us/en/category/wifi-flagship/products/u7-pro-xgs?variant=u7-pro-xgs-us I have been using this combo for 3 months now.
    • YouTube app is no longer compatible with several iPhones by Taras Buria Google is rolling out a new update for the YouTube app on iOS, and it is bad news for those still using an old iPhone. Starting with version 20.22.1, the latest release in the App Store, YouTube for iPhone now requires iOS 16 and newer. Previously, the app required a device with iOS 15 and newer. The new hardware requirement makes several iPhones incompatible with the latest version of the YouTube app. Those include the iPhone 6S / 6S Plus, iPhone 7 / 7 Plus, and the original iPhone SE. The seventh-generation iPod touch is also no longer compatible. On the iPad side, the update kicks out the second-generation iPad Air and the fourth-generation iPad mini. Although old iPhones can no longer install YouTube version 20.22.1 and newer, old versions continue working just fine. However, going forward, users will not receive new features and improvements. Also, at some point in the future, the app will stop working altogether. Another workaround is to use the web version of the app, but that also provides a limited experience compared to the up-to-date client. Google is not the only service that kicks out old and now unsupported Apple devices. Recently, WhatsApp developers dropped iPhones that cannot run iOS 15.1 or newer. The news is clearly a bummer for those who are still using their old iPhones, which, to Apple's credit, have a solid lifespan (as long as you are happy with the battery life). However, it is also worth keeping in mind that the iPhone 6S series was released almost a decade ago. Having ten years of support is impressive, but it is clearly time to move on. Perhaps my friend with his day-one iPhone 7 Black can finally consider buying something less ancient.
    • Guys have already appeared saying that Windows 11 ruined their lives, stole their bank password, killed their dog, kidnapped their mother and that's why they will never install Windows 11 again.
    • I think they start to use AI in Robots but in very early stage. I think in less than 20 years we will see these movies in real life
  • Recent Achievements

    • Reacting Well
      Cryptecks earned a badge
      Reacting Well
    • Week One Done
      primussolicitors798 earned a badge
      Week One Done
    • First Post
      nothin earned a badge
      First Post
    • Enthusiast
      Epaminombas went up a rank
      Enthusiast
    • Posting Machine
      Fiza Ali earned a badge
      Posting Machine
  • Popular Contributors

    1. 1
      +primortal
      188
    2. 2
      snowy owl
      134
    3. 3
      ATLien_0
      130
    4. 4
      Xenon
      119
    5. 5
      +FloatingFatMan
      97
  • Tell a friend

    Love Neowin? Tell a friend!