Gapless Winamp output without the use of a plugin.


Recommended Posts

I am a very big Pink Floyd fan. I pretty much listen to them everyday of the week.

They are also the only band that has more than 1 album that I love every song on.

The only problem is that most audio players have a small gap between songs, and when you're listening to Pink Floyd it can ger really annoying.

I tried many plugins but all of them didn't work too well and they didn't allow me to use my other DSP plugins.

I then started messing around with Winamp and found the trick to doing this without a plugin.

I only did this in Winamp 5 but it should work on just plain old 2.

Lets get on with the guide now.

1)Open Winamp and right click "Options>Prefrences" or just press ctrl+p

2)In the treeview on the side look for the group titled Plug-Ins. In that group there should be an Output selection. Click it.

3)You should now see a box in the area next to the treeview. In that box there should be things that say "Nullsoft Disk Writer plug-in" and "waveOut output". Look for one that says "Direct Sound output". Click it and then press the configure button at the bottom of the window.

4)A new window should've popped up. Look on the top of it and click the tab "Buffering". This is the final part. all you need to do is Adjust the Buffer-Ahead on Track change to a high number.

There are 3 slider bars that allow you to adjust the Buffer settings.

Buffer Length

This adjusts the length of the buffer. This also limits the Prebuffer and Buffer-ahead.

Example: If I had a Buffer Length of 2400 ms then my Prebuffer and Buffer-Ahead could only go from a range of 0 ms - 2400 ms.

Prebuffer on start/seek/underrun

This tell Winamp how much data to eat before it outputs sound. I don't really understand what that means, so I can't inform you on this.

The suggested amount for this is 500 ms - 1000 ms.

Buffer-Ahead on track change

This is what we want to change. This tells Winamp when to start reading the next song to get a gapless transition. For me, I just set it to 5000 ms (5 seconds) but that is a bit to high for some people. I'd say anywhere from 1000 ms to 5000 ms is a good range. If you have low memory, a slow computer, or and outdated one, then set it lower, but not to low, or else it'll still have gaps.

The way this works is like this.

Example: If I set the Buffer-Ahead to 5000 ms, then Winamp will start reading the next song where the current song had 5 seconds left until it ends. This make it so winamp can trnasition them smoothly.

After that is all done, click the apply button on the window and then close the propterites window. Try it out! open two songs and set it near the end. If it worked then there should be no gap.

Waluha!

You know, I was wondering the same thing as you were and I too decided to fiddle around with those settings, because I have alot of Game soundtracks that loop. When I did it though I didnt think it was the best way to it though. Seems I was wrong.

Good stuff.

Oh, Ill also point out, It should be fairly obvious, but you cannot set the Buffer-Ahead any higher than the max amount winamp is allowed to buffer tracks. :D

which is what Dazza said.

OK folks, let's get this right:

When you get to the buffering tab, Whatever the value for "Buffer length" is is going to be the *MAX* you can make the "Buffer-ahead on track change" setting. So, if you leave "Buffer length" at 2000 you can't set "Buff-ahead ..." to any higher than 2000.

That is what Kenta meant when writing

  "Kenta" said:
Buffer Length

This adjusts the length of the buffer. This also limits the Prebuffer and Buffer-ahead.

Example: If I had a Buffer Length of 2400 ms then my Prebuffer and Buffer-Ahead could only go from a range of 0 ms - 2400 ms.

HTH

Hmmmm - RIO Karma - =costs money = I have to spend money

WinAmp = free = I can listen to it through my 210 Watt Receiver in my AV system which I have my computer routed through and add effects, set EQ, etc.... - And I don't have to pay for it.

Guess which one *I* am going for.

What's funny is that you're still using a plugin.

It's just that they plugin you're using *comes* with Winamp. =)

What you mean to say is that you're not downloading *another* plugin.

Just about *everything* in Winamp is plugin based. Input plugins, output plugins, DSP plugins, visualization plugins...

If you didn't have any plugins, Winamp wouldn't do very much...

Dazza: I daid it, but it wasn't in a very good position to read it from.

Superkicky: I could send you the updated Direct Sound output plugin to see if that works.

If you want it just PM me.

semifamous: Yes your right, but it's the way out language developed.

Think of it this way. If you had hot coffie and let it set on the counter for a few hours and then drank it, you'd say it's cold.

Then you do the same thing, but with an ice cold soda. When you go to drink it, you say it's warm, even though the soda and coffie are about the same tempature.

The same can be said with the included plugins and the 3rd Party plugins. But if we got technical, yes, they are just plugins.

I still notice one "little" gap in live recordings, to fix it, choose "remove silence at the beginning / end of track" in "other" tab.....

Use this trick, plus Kenta Guide, and you will no hear gaps between songs.

Edited by retri
  • 1 year later...
  • 1 month later...
  • 2 years later...
  • 2 months later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BurnAware 18.7 by Razvan Serea Free burning software to create CDs, DVDs, and Blu-ray discs of all types. BurnAware is a full-fledged, easy-to-use burning software which allows users to write all types of files such as digital photos, archives, documents, music and videos to CDs, DVDs and Blu-ray Discs, including BDXL and M-Disc. With BurnAware, you also be able to create boot or multisession discs, high-quality Audio CDs and Video DVDs, make and burn ISO images, copy and backup discs, extract audio tracks, verify and recover data from multisession or unreadable discs. BurnAware is available in three editions - Free, Premium and Professional. Compare and pick edition which is suitable for you. Features Burn files and folders to CD, DVD or Blu-ray Discs. Append or update multisession discs. Burn standard or boot disc images. Burn ISO files to multiple recorders simultaneously. Create boot CDs or DVDs. Create Audio CDs. Create DVD-Video discs. Create MP3 CD / DVD / Blu-ray Discs. Make standard or boot disc images. Copy CD, DVD or Blu-ray Discs to ISO images. Copy from discs to discs. Verify discs byte by byte. Recover files from damaged discs or different sessions. Extract audio tracks from Audio CDs. Erase and format re-writable discs. View detailed disc and drive information. Supports All media types (CD/DVD/Blu-ray Disc) including Double Layer All current hardware interfaces (IDE/SCSI/USB/1394/SATA) including AHCI UDF/ISO9660/Joliet file systems (any combination) On-the-fly writing (no staging to hard drive first) Verification of written files Multisession DVD-RW/DVD+RW Unicode CD-Text (tracks and disc) Compatible with Windows Vista 7, 8, 10, 11 (32-bit or 64-bit) BurnAware 18.7 changelog: Updated translations. Updated disc burning SDK. Improved indirect disc copying (CD <-> DVD). Optimized overall performance on 64-bit systems. Download: BurnAware Free 18.7 | 11.8 MB (Freeware) View: BurnAware Free Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yeah, as a general rule I prefer standard XBox-like controllers that work like usual out-of-the-box. additional software tends to be overkill. p.s. even my 8BitDo Ultimate 2C wired, while I had to tweak something (setup a udev rule) on Linux for it to work 'out-of-the-box' (which is required for Xinput mode to work in kernels prior to 6.12), I can slightly tweak a small amount of additional buttons/features on the controller itself, no software needed.
    • Are you saying that you don’t think they will be adding the “.” versioning? They definitely will.
    • What will you find out about me?? Are you not going to answer this question as well? Empty threats for just asking questions😂
    • My Alexa Show is just a glorified Alarm clock and weather reporter.
  • Recent Achievements

    • Apprentice
      Adrian Williams went up a rank
      Apprentice
    • Reacting Well
      BashOrgRu earned a badge
      Reacting Well
    • Collaborator
      CHUNWEI earned a badge
      Collaborator
    • Apprentice
      Cole Multipass went up a rank
      Apprentice
    • Posting Machine
      David Uzondu earned a badge
      Posting Machine
  • Popular Contributors

    1. 1
      +primortal
      535
    2. 2
      ATLien_0
      265
    3. 3
      +Edouard
      193
    4. 4
      +FloatingFatMan
      183
    5. 5
      snowy owl
      135
  • Tell a friend

    Love Neowin? Tell a friend!