:( Need Immediate Assistance! :(


Recommended Posts

I was looking inside my computer today and noticed it was dusty. Sooo i took it outside and blew it out with an air compressor and the computer would not start. The only thing that would turn on was the power supply and everything else not touching the mother board in anyway. I was wondering if i had messed up my mother board or what not and wether this is a minor or serious problem. If you need any more details just ask me and thx u for helping.

:no:

Edit: Also before this the computer would constantly restart. I scanned for viruses and none were found and this was the reason as to why i blew out the computer thinking it was overheating or soemthing.

Link to comment
https://www.neowin.net/forum/topic/311035-need-immediate-assistance/
Share on other sites

You've probablly just got a loose card or cable.

585804531[/snapback]

I undid all the cords and wires and put them back again and nothing new happened and the problem seems to be getting worse and now the power supply stays on even when i press the off button for the pc.

hmm.

I'm guessing you did all of the obvious then.

What type of mobo is it?

Edit : Oh did you check your softpower 2 pin connector?

They come loose, or they get dirty from time to time. Who knows when you blew that out.

hmm.

I'm guessing you did all of the obvious then.

What type of mobo is it?

Edit : Oh did you check your softpower 2 pin connector?

They come loose, or they get dirty from time to time. Who knows when you blew that out.

585804600[/snapback]

:blush: what is mobo? and 2 pin connector? :blush:

lol mobo = Motherboard(the biggest board there, attached to the back of your case :D)

The connectors i'm talking about are little black rectangle 2-3 pin connectors from the front part of your case(where the led lights are..and the case power button.

Also I would grab the book or have somebody reset the CMOS on the board like BigDave Suggested.

lol mobo = Motherboard(the biggest board there, attached to the back of your case :D)

The connectors i'm talking about are little black rectangle 2-3 pin connectors from the front part of your case(where the led lights are..and the case power button.

Also I would grab the book or have somebody reset the CMOS on the board like BigDave Suggested.

585804646[/snapback]

i tried the pins and how do i reset the cmos?

and the mobo model is a lomita MBEM1673LMTL

anyone? got any ideas?

and? could this be a case of static shock to the board?

585804957[/snapback]

Well, did you touch anything on the motherboard, video card, etc., while you were cleaning it? If not, then I doubt you shocked it to death.

To clear/reset the CMOS, look around on your motherboard for three pins, with a small piece of plastic covering two of them (pins 1 & 2) that says CMOS near it. This is usually located somwhere in the bottom right-hand corner of the motherboard. After you find it, make sure all power is disconnected from your machine, then remove the small piece of plastic (this is called a "jumper" by the way) and put it over pins 2 & 3 instead. Wait about ten seconds or so, then once again remove the jumper and put it back over pins 1 & 2.

Also, one more thing: from what you've described, I think your power supply unit (PSU) might be dead. It would be one heck of a coincedence for this to happen at the same time you decided to clean your PC, but it does sound like a dead PSU to me. That would also explain the random restarts you were mentioning earlier. Try the CMOS reset thing, and anybody's else suggestions, but if none of that works, I would start searching for a new PSU.

Well, did you touch anything on the motherboard, video card, etc., while you were cleaning it? If not, then I doubt you shocked it to death.

To clear/reset the CMOS, look around on your motherboard for three pins, with a small piece of plastic covering two of them (pins 1 & 2) that says CMOS near it. This is usually located somwhere in the bottom right-hand corner of the motherboard. After you find it, make sure all power is disconnected from your machine, then remove the small piece of plastic (this is called a "jumper" by the way) and put it over pins 2 & 3 instead. Wait about ten seconds or so, then once again remove the jumper and put it back over pins 1 & 2.

Also, one more thing: from what you've described, I think your power supply unit (PSU) might be dead. It would be one heck of a coincedence for this to happen at the same time you decided to clean your PC, but it does sound like a dead PSU to me. That would also explain the random restarts you were mentioning earlier. Try the CMOS reset thing, and anybody's else suggestions, but if none of that works, I would start searching for a new PSU.

585805059[/snapback]

Im almost 100% sure i didnt touch anything inside the pc till it died and even then i touched some kind of metal to lose any static built up but theres always a chance and i reset the cmos and it didnt do anything. I thought it was the power supply but the thing is that everything else works except things on the mother board

Since you have full power. You've checked and rechecked the obvious.

Out of everything here the only thing that would make it not post would be the CPU itself... Now I can't see static reaching it because the metal inside your basic case(which is what i'm thinking you have) gounds everything out. (Not some of the lan-li cases obviously because of the aluminum).

Unless you touched one of the boards directly(it doesn't take much, your arm hair will do it.).

I'd really take a look at the CPU. As unlucky as it is. That would be the ONLY thing now since you tried

A) The memory(course you could try putting the sticks in a different machine and see if they work for sure.).

B) I'm a hands on person, since i'm not there to look at it. This is all I can tell you apart from the obvious.

Oh and one more thing. Don't ever use a air compressor to blow out any electronics again. Unless the one you had, had a variable setting. Even then it needs to be very low or you risk damaging something.

Just buy one can of compressed air next time you want to blow out your computer.

Since you have full power. You've checked and rechecked the obvious.

Out of everything here the only thing that would make it not post would be the CPU itself... Now I can't see static reaching it because the metal inside your basic case(which is what i'm thinking you have) gounds everything out. (Not some of the lan-li cases obviously because of the aluminum).

Unless you touched one of the boards directly(it doesn't take much, your arm hair will do it.).

I'd really take a look at the CPU. As unlucky as it is. That would be the ONLY thing now since you tried

A) The memory(course you could try putting the sticks in a different machine and see if they work for sure.).

B) I'm a hands on person, since i'm not there to look at it. This is all I can tell you apart from the obvious.

Oh and one more thing. Don't ever use a air compressor to blow out any electronics again. Unless the one you had, had a variable setting. Even then it needs to be very low or you risk damaging something.

Just buy one can of compressed air next time you want to blow out your computer.

585805544[/snapback]

:( well im prolly gonna get a new comp since i cant move the F'in heat sink on this comp and its like stuck on there pretty good and now im sick of worrying about and so... if it doesnt fix itself in a few day :p i quit on it

WOW.. this is really dumb lol.

i have compressed air at work.. 100PSI, and i would NEVER blow my PC out with that. clean it for christ sakes.. it only takes 15min.

i bet you got something loose you don't see. compressed air (under 50psi) wouldn't have too much of an effect

WOW.. this is really dumb lol.

i have compressed air at work.. 100PSI, and i would NEVER blow my PC out with that.  clean it for christ sakes.. it only takes 15min.

i bet you got something loose you don't see.  compressed air (under 50psi) wouldn't have too much of an effect

585805660[/snapback]

my compressor is set on 40 psi

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • One of the strangest galaxies in our Universe could help answer some long overdue questions by Sayan Sen Image by Pixabay via Pexels | Not representative An international team of astronomers led by the Department of Astronomy at Tsinghua University has discovered an unusually metal-poor galaxy that may contain signs of first-generation star formation. The galaxy, named Metal-Pristine Galaxy COSMOS Redshift 3 (MPG-CR3), or CR3, was identified using observations from the James Webb Space Telescope (JWST), the Very Large Telescope (VLT), and the Subaru Telescope. The findings, published in The Astrophysical Journal Letters, describe CR3 as the most metal-poor galaxy known from the period known as "cosmic noon," around 11.5 billion years ago. Cosmic noon refers to a period when the universe was producing stars at its highest rate and galaxies were growing rapidly. In astronomy, "metals" refers to all elements heavier than helium, including oxygen, carbon, and iron. Because CR3 contains so few of these heavier elements, researchers say it closely resembles what scientists expect the earliest galaxies in the universe may have looked like. The discovery is significant because it could offer clues about Population III (Pop III) stars, the first generation of stars thought to have formed after the Big Bang. These stars are believed to have formed from gas made almost entirely of hydrogen and helium, before heavier elements were created inside stars and spread across the universe through supernova explosions. Hence this is why CR3 has been referred to as a "living fossil." Scientists have long believed that Population III stars existed only in the very early universe. As more generations of stars formed and died, they enriched surrounding gas with heavier elements, making the conditions needed for metal-free star formation increasingly rare. Because of this, researchers expected the formation of such stars to have largely ended after the epoch of reionization, a period when radiation from the first stars and galaxies transformed the neutral hydrogen filling the universe and made it largely transparent to ultraviolet light. CR3 appears to challenge that idea. The galaxy was observed at a redshift of z = 3.193 ± 0.016. Redshift measures how much light from a distant object has been stretched as the universe expands and helps astronomers determine how far back in time they are looking. In this case, the redshift corresponds to roughly 11.5 billion years ago during cosmic noon. Although the universe was already several billion years old by that point, CR3 shows characteristics more commonly associated with much earlier galaxies. Observations revealed exceptionally strong emissions from hydrogen and helium, including Lyα, Hα, and He I λ10830. Lyα, or Lyman-alpha emission, is a specific wavelength of light produced by hydrogen and is widely used to study distant galaxies. Hα emission is another hydrogen signature commonly used to trace active star formation, while He I λ10830 is produced by helium and can indicate the presence of very hot, young stars. The measured equivalent widths of EW₀(Lyα) = 822 ± 101 Å and EW₀(Hα) = 2814 ± 327 Å are among the highest ever observed in star-forming galaxies. Equivalent width is a measure of the strength of an emission line relative to the surrounding light, and such large values are typically associated with intense and very recent star formation. At the same time, researchers found no statistically significant detections of metal emission lines, including [O III] λλ4959, 5007 and C IV λλ1548, 1550. Emission lines act as chemical fingerprints that reveal which elements are present in a galaxy. Oxygen and carbon lines are commonly seen in galaxies that have already undergone significant chemical enrichment. Their absence in CR3 suggests an unusually pristine environment. Using abundance calibration methods developed with JWST observations, the team placed a 2σ upper limit on the galaxy's gas-phase metallicity of 12+log(O/H)<6.52, corresponding to less than 0.7% of the Sun's metallicity (Z < 7 × 10⁻³ Z⊙). Gas-phase metallicity measures the abundance of heavy elements in a galaxy's gas. A 2σ upper limit indicates that the true value is very unlikely to be higher than the quoted threshold. Even when accounting for uncertainties in the calibration methods, the most conservative limit remains 12+log(O/H)<6.95, making CR3 the most metal-poor galaxy identified at cosmic noon. The galaxy also appears to contain very little dust. Researchers measured a Lyα/Hα flux ratio of 13.9 ± 2.5, a result that suggests negligible dust attenuation, meaning very little of the galaxy's light is being absorbed or scattered by cosmic dust. Because dust is usually produced by earlier generations of stars, this finding further supports the idea that CR3 has experienced very little chemical enrichment. Further analysis using spectral energy distribution modelling, a technique that compares observed light with theoretical models, suggests that CR3 contains an extremely young stellar population only around 2 million years old. The modelling, which used Population III stellar templates, also indicates the galaxy has a stellar mass of approximately 6.1 × 10⁵ M⊙. The symbol M⊙ represents one solar mass, or the mass of the Sun. One of the key questions raised by the discovery is how such a chemically primitive galaxy could exist in a universe that had already spent billions of years producing heavier elements. To investigate this, the researchers examined CR3's surroundings. Their analysis suggests the galaxy may lie in a slightly underdense environment, with a density contrast of roughly δ ≈ −0.12. An underdense region contains less matter and fewer galaxies than average. The team suggests that this relative isolation may have helped preserve pockets of pristine gas. Metal-rich material expelled from nearby galaxies may never have reached CR3, while the lower rate of galaxy mergers and interactions could have slowed the mixing of enriched gas into the system. If future observations confirm these findings, CR3 could provide some of the strongest evidence yet that first-generation star formation continued well after the epoch of reionization. Such a result would challenge the conventional view that pristine star formation ended by z ≳ 6 and suggest that small pockets of metal-free gas survived much longer than previously thought. Researchers stress that more observations will be needed to determine the galaxy's true nature. Future spectroscopic studies with higher resolution and better signal quality could help confirm whether CR3 is genuinely hosting Population III star formation. The discovery is also expected to encourage searches for other similar galaxies, which could help astronomers better understand how the first stars formed and how galaxies evolved in the early universe. Source: Tsinghua University, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • "I think in the immediate absence of a partner to apply relief" In the words of Sterling Archer... "Phrasing!"
    • For me, the fundamental problems with these "smartglasses" is that they really don't work well for people with significant prescriptions and massively up the price if you use attached lenses if they have displays, and if they don't, then they're not actually "smart" anything, rather just connecting to your phone and relaying voice to an AI. In a few cases like this, they throw in small cameras to feed video to the AI. All around, these feel like both a solution looking for a problem, and the problems it tries to solve seem more easily solved by different approaches and designs. Oddly, if the rumours are true, Apple may actually have invented something for once and it kind of does this right: put cameras in ear buds and manage the interface to AI exactly as most of us do: tapping on an ear bud and saying "Hey Google" or "Hey Siri." That makes them compatible with almost everyone, can double up as a hearing assist device, an impaired vision assist device, a "smart" device... and answer your phone and play music. That just seems like a better solution all around.
    • Usually the bigger ones with many fixes/changes take a few, theyre an exception to the rule most likely
    • If you don’t get lucky with Valve’s Steam Machine reservation system, you can make your own Steam Machine instead. Valve says that “starting with the SteamOS 3.8 release, you can put together your own Steam Machine using whatever PC parts you want.” SteamOS 3.8.10 launched last week with a slew of updates, including “improved compatibility with recent Intel and AMD platforms.” Alongside that improved compatibility, Valve is giving gamers the green light to install SteamOS on their own desktops. In an interview with The Verge, Valve’s Pierre-Loup Griffais said Valve has been “rolling out improvements to [SteamOS] so it’s more compatible with desktop hardware,” including eventual support for Nvidia graphics. Griffais says Valve has “a growing team” working on Nvidia driver support for SteamOS, adding, “We’re collaborating with Nvidia very closely.” While he mentioned that Nvidia support might not come this year, Griffais emphasized that “it’s certainly something that we’re working on in the background.”     Subscription not needed: https://archive.fo/Tssfc Subscription needed: https://www.theverge.com/games/953411/valve-steamos-desktop-nvidia
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      454
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      84
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!