Could my iPod be dangerous?


Recommended Posts

A quick question.

Today I'm at work with my 3g iPod. Because the battery is next to useless on this thing, I've got it charging whilst I listen to it at my desk. I noticed something when I first started doing this (which was in fact today), that when the iPod is charging, a mild electrical current runs through the metal backing (and sides). It's not enough to sting but it is certaintly noticable when you rub your fingers on it.

It's of course no harm to me as is, but is there a potential that this could possibly get worse, and hurt me? Or is this just another normal iPod quirk?

Link to comment
https://www.neowin.net/forum/topic/311155-could-my-ipod-be-dangerous/
Share on other sites

On your advise I gave them a call. They think that firewire cable is slightly damaged and relaying a small arc onto the metal backing, and suggested I try another one. As my 3g iPod is out of warranty by a couple months they weren't interested in taking the iPod and having a look unless I pay $300 (which is $100 shy of a brand spanking new 4g iPod).

They we're very friendly and they took me seriously, but still, I'm a bit disappointed. I'm skeptical about it being the cable, though I will test their theory.

Maybe I should sell it on eBay as a special electrocution edition iPod!

On your advise I gave them a call. They think that firewire cable is slightly damaged and relaying a small arc onto the metal backing, and suggested I try another one. As my 3g iPod is out of warranty by a couple months they weren't interested in taking the iPod and having a look unless I pay $300 (which is $100 shy of a brand spanking new 4g iPod).

They we're very friendly and they took me seriously, but still, I'm a bit disappointed. I'm skeptical about it being the cable, though I will test their theory.

Maybe I should sell it on eBay as a special electrocution edition iPod!

585811377[/snapback]

that used to happen to me when i would travel with the ipod out of the country and use an adaptor with it. I never really thought much of it though.

that used to happen to me when i would travel with the ipod out of the country and use an adaptor with it. I never really thought much of it though.

585811384[/snapback]

I'm guessing this is happening because the international adapter (and my Australian adapter) has no connection for earth and is therefore earthing through whatever comes it contact with the metal plate (which must clearly be in contact with an electrical component).

I'm not worried about the amount of electricity going through the metal backing now (though the sensation is not pleasant), I'm worried that it may suddenly get worse and cause harm to myself or someone else.

They wanted $300 to work on it!!! They might as well should of said: we won't work on it. Thats the feeling I get, anyway.

Kind of reminds me of the time my iPaq's screen busted. I had it for less then a month, and it broke while in my pocket. I called up HP support and they said I could send it to them. So i did, and they didn't want to fix the screen for free, they wanted $180. I was like: forget that! The unit only cost $240 (after student discount). I told them the device was defective because it was called a PocketPC, so it should be able to survive in ones pocket. After a week of going back and forth with them, they finally replaced the screen for free.

Hehe..i still carry the thing around in my pocket. Its been a year and 6+ months since I got the replacement, and have had no problems.

But in your situation: they probably wouldn't see it as a "safety risk" even if it is a safety risk for you. They judge safety risks by how many people are affected. If you do get hurt you can always sue.

i don't think you have anything to worry about.

I've looked at my iPod power adapter, and it says it has a 12V output. combining the voltage of the iPod itself, which i think is about 3.7V like on a cell phone, the maximum voltage you could feel on the back panel is less than 16V. it shouldn't be dangerous AFAIK.

i don't think you have anything to worry about.

I've looked at my iPod power adapter, and it says it has a 12V output. combining the voltage of the iPod itself, which i think is about 3.7V like on a cell phone, the maximum voltage you could feel on the back panel is less than 16V. it shouldn't be dangerous AFAIK.

585832575[/snapback]

That's a really good explanation - thank you. I'm still not overly impressed that my iPod is zapping me but it's reassuring to know that there is no possible way that this problem could get worse to the point of it being dangerous.

You shouldnt feel anything on the exterior case when the iPod is charging.? Call Apple on this one, even if the unit is out of warranty as this is a possible "safety issue"

585808274[/snapback]

I work at a well known technology retailer in Sydney, and about six months ago I did a return/exchange on a brand-new Microsoft Wireless Desktop. The mouse had melted around the top and bottom (we realised that it was the customers fault for putting the batterys in the wrong way), however she said that she "hurt her hand badly".

If aMicrosoft IntelliMouse can melt and hurt someone>, then I wonder what the iPod could do.:pp

Btw, I use a Microsoft Wireless Desktop and it's never harmed me. lol:happy::

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Surprise! We still can't get it right. With the current state of AI, the crappy software, the huge mega-corporations that back all of these idiot things, I think we are a very long way away from SAE Level 5. I, for one, will never get in one.
    • Nice. September/October GA?! I'll keep following it, but won't install any preview or beta versions.
    • Wow, that could have been dangerous, certainly not ready for these things. They have to be 100% or pretty well close to it. Not that I will see one i doubt, never mind ride in one, they may have them in London, but I doubt they will come to where I live.
    • Nothing kills CMF Phone 2 Pro's successor due to rising memory prices by Hamid Ganji Storage and RAM prices have been rising over the past year, leading to a significant increase in the cost of electronics for customers around the world. Many companies are now revising their plans for upcoming devices due to higher component costs and overall production expenses. CMF is the latest company to cancel the successor to one of its best-selling phones due to rising memory prices. CMF is a sub-brand of Nothing and focuses on making budget smartphones for growing markets. The brand launched the CMF Phone 2 Pro last year with some eye-catching specifications and an affordable price. While many customers may have been waiting for a successor this year, one of the company’s executives has announced that CMF will not release a new smartphone this year. And AI is to blame. As Nothing co-founder Akis Evangelidis announced on X, the company has been working on a successor to the CMF Phone 2 Pro, but with current memory prices, it cannot “build a phone that feels like a genuine step forward at a price that makes sense for CMF.” So, no new CMF phone will be launched this year. Meanwhile, Evangelidis said the company still has several new products in the pipeline, including some in entirely new categories. He added that the Nothing brand will also continue launching new products through 2026. Budget smartphones are among the first victims of the surge in RAM and memory prices, as they have become more expensive to build. The sharp increase in memory costs could also reshape the traditional price ranges associated with budget phones. Apple CEO Tim Cook also recently said that price increases for some of the company’s products are unavoidable because RAM and memory have become significantly more expensive this year. Analysts estimate that the base price of the upcoming iPhone 18 Pro could rise to $1,399 due to current market shortages.
    • Nudge me when they bring back hardware audio acceleration so I can get my EAX 5 back. We've evolved graphics to real-time path tracing, but regressed audio some 15 years back in time with this stupid software audio stack.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      541
    2. 2
      +Edouard
      187
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      75
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!