Could my iPod be dangerous?


Recommended Posts

A quick question.

Today I'm at work with my 3g iPod. Because the battery is next to useless on this thing, I've got it charging whilst I listen to it at my desk. I noticed something when I first started doing this (which was in fact today), that when the iPod is charging, a mild electrical current runs through the metal backing (and sides). It's not enough to sting but it is certaintly noticable when you rub your fingers on it.

It's of course no harm to me as is, but is there a potential that this could possibly get worse, and hurt me? Or is this just another normal iPod quirk?

Link to comment
https://www.neowin.net/forum/topic/311155-could-my-ipod-be-dangerous/
Share on other sites

On your advise I gave them a call. They think that firewire cable is slightly damaged and relaying a small arc onto the metal backing, and suggested I try another one. As my 3g iPod is out of warranty by a couple months they weren't interested in taking the iPod and having a look unless I pay $300 (which is $100 shy of a brand spanking new 4g iPod).

They we're very friendly and they took me seriously, but still, I'm a bit disappointed. I'm skeptical about it being the cable, though I will test their theory.

Maybe I should sell it on eBay as a special electrocution edition iPod!

On your advise I gave them a call. They think that firewire cable is slightly damaged and relaying a small arc onto the metal backing, and suggested I try another one. As my 3g iPod is out of warranty by a couple months they weren't interested in taking the iPod and having a look unless I pay $300 (which is $100 shy of a brand spanking new 4g iPod).

They we're very friendly and they took me seriously, but still, I'm a bit disappointed. I'm skeptical about it being the cable, though I will test their theory.

Maybe I should sell it on eBay as a special electrocution edition iPod!

585811377[/snapback]

that used to happen to me when i would travel with the ipod out of the country and use an adaptor with it. I never really thought much of it though.

that used to happen to me when i would travel with the ipod out of the country and use an adaptor with it. I never really thought much of it though.

585811384[/snapback]

I'm guessing this is happening because the international adapter (and my Australian adapter) has no connection for earth and is therefore earthing through whatever comes it contact with the metal plate (which must clearly be in contact with an electrical component).

I'm not worried about the amount of electricity going through the metal backing now (though the sensation is not pleasant), I'm worried that it may suddenly get worse and cause harm to myself or someone else.

They wanted $300 to work on it!!! They might as well should of said: we won't work on it. Thats the feeling I get, anyway.

Kind of reminds me of the time my iPaq's screen busted. I had it for less then a month, and it broke while in my pocket. I called up HP support and they said I could send it to them. So i did, and they didn't want to fix the screen for free, they wanted $180. I was like: forget that! The unit only cost $240 (after student discount). I told them the device was defective because it was called a PocketPC, so it should be able to survive in ones pocket. After a week of going back and forth with them, they finally replaced the screen for free.

Hehe..i still carry the thing around in my pocket. Its been a year and 6+ months since I got the replacement, and have had no problems.

But in your situation: they probably wouldn't see it as a "safety risk" even if it is a safety risk for you. They judge safety risks by how many people are affected. If you do get hurt you can always sue.

i don't think you have anything to worry about.

I've looked at my iPod power adapter, and it says it has a 12V output. combining the voltage of the iPod itself, which i think is about 3.7V like on a cell phone, the maximum voltage you could feel on the back panel is less than 16V. it shouldn't be dangerous AFAIK.

i don't think you have anything to worry about.

I've looked at my iPod power adapter, and it says it has a 12V output. combining the voltage of the iPod itself, which i think is about 3.7V like on a cell phone, the maximum voltage you could feel on the back panel is less than 16V. it shouldn't be dangerous AFAIK.

585832575[/snapback]

That's a really good explanation - thank you. I'm still not overly impressed that my iPod is zapping me but it's reassuring to know that there is no possible way that this problem could get worse to the point of it being dangerous.

You shouldnt feel anything on the exterior case when the iPod is charging.? Call Apple on this one, even if the unit is out of warranty as this is a possible "safety issue"

585808274[/snapback]

I work at a well known technology retailer in Sydney, and about six months ago I did a return/exchange on a brand-new Microsoft Wireless Desktop. The mouse had melted around the top and bottom (we realised that it was the customers fault for putting the batterys in the wrong way), however she said that she "hurt her hand badly".

If aMicrosoft IntelliMouse can melt and hurt someone>, then I wonder what the iPod could do.:pp

Btw, I use a Microsoft Wireless Desktop and it's never harmed me. lol:happy::

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Couple years ago I got a brand new 4TB Samsung 990 Pro for $250 during Black Friday
    • Thanks
    • Can confirm, I've built stuff for others and no complaints using their products.
    • Yes I agree, it's annoying. You can now miss tabs unless you point low enough.
    • Sysinternals Suite 2026.17.06 by Razvan Serea The Sysinternals Suite is a comprehensive package of advanced Windows utilities created by Mark Russinovich, who launched the Sysinternals website in 1996 to share his system tools and technical resources. This suite combines a wide range of troubleshooting and diagnostic tools, including Process Explorer, Process Monitor, Sysmon, Autoruns, ProcDump, the PsTools collection, and many others. It provides everything IT professionals and developers need to manage, monitor, and troubleshoot Windows systems and applications. The Suite bundles all of the core troubleshooting utilities along with their help files. Non-troubleshooting extras—such as the BSOD Screen Saver or NotMyFault—are excluded. In addition to the well-known tools, it also includes AccessChk, Autologon, Ctrl2Cap, DiskView, Disk Usage (DU), LogonSessions, PageDefrag, PsLogList, PsPasswd, RegMon, RootkitRevealer, TCPView, VMMap, ZoomIt, and more. Sysinternals Suite 2026.17.06 changelog: Autoruns v14.3 - This update to Autoruns, a utility for monitoring startup items, adds bug fixes and improves the command-line application autorunsc. ZoomIt v12.1 - This update to ZoomIt, a screen magnification and annotation tool, adds image backgrounds, webcam background blur and microphone noise cancellation support. Coreinfo v4.01 - This update to Coreinfo, a tool that reports processor, socket, NUMA memory, and cache topology of a system, as well as processor features supported, adds support for new processor features. DebugView v5.02 - This update to DebugView, a tool for displaying both kernel-mode and Win32 debug output, adds Ctrl-Shift-A support for selecting all output, and agent skills support for the CLI utility. LiveKd v5.64 - This update to LiveKd, a utility that allows running the kernel debugger on a live system, fixes a debugging privileges issue. ProcDump 3.5.2 for Linux - This update to ProcDump for Linux, a tool for capturing process dumps, adds .NET counters and a custom core dumper. Process Monitor v4.04 - This update to Process Monitor, a utility for observing real-time file system, Registry, and process or thread activity, adds some bug fixes Sysmon v15.21 - This update to Sysmon, an advanced host security monitoring tool, adds some bug fixes. Download: Sysinternals Suite 2026.17.06 | 168.0 MB (Freeware) Download: Sysinternals Suite for ARM64 | 15.4 MB Link: Sysinternals Suite Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
    • Week One Done
      Harris Gilbert earned a badge
      Week One Done
    • One Month Later
      Vincian earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      85
    4. 4
      ATLien_0
      64
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!