Recommended Posts

1) make sure you have the latest release,

2) check that the checksum matches,

3) remove the old version before installing the new version unless the new version has "update" in its title.

remember:

- if a release has "update" in the title then it should be applied to the previos version, and adds to it.

- if a release does NOT have "update" in the title, its a full copy and its best to remove the old version first.

the reason for this is because the new version may have a different structure, or modules may have been removed or renamed and problems could arise if its not done.

  tineke26 said:
sorry, i looked at the wrong drive in my computer for the setupname. But the one I have installed is the april version. (have both setups on my computer).

585853042[/snapback]

Is all working on your computer now?

:ninja: Pascal B :ninja:

I still have the same problem... :(

Anyway, before asking for help, I tried all suggested actions and finally installed AutopatcherXP April (Eng) on a new pc, soon after windows installation, with no previous version of AP or any other ''utility'' installed, which might interfere with it and with last version of VB runtime, but there is no difference: at a certain time (sorry but I can't say when, because there is no info about) the message box appears and there is no way to continue...

PS: I use italian version on winXPsp2, but if I didn't misunderstand, AutoPatcherXP (eng/intl ver) can be installed anyway: it will be the program itself that will handle (when possible) the locale, or, at least, it should not go in error.

Thanks in advance.

  kiamoris said:
I still have the same problem...  :(

Anyway, before asking for help, I tried all suggested actions and finally installed AutopatcherXP April (Eng) on a new pc, soon after windows installation, with no previous version of AP or any other ''utility'' installed, which might interfere with it and with last version of VB runtime, but there is no difference: at a certain time (sorry but I can't say when, because there is no info about) the message box appears and there is no way to continue...

PS: I use italian version on winXPsp2, but if I didn't misunderstand, AutoPatcherXP (eng/intl ver) can be installed anyway: it will be the program itself that will handle (when possible) the locale, or, at least, it should not go in error.

Thanks in advance.

585870598[/snapback]

What is the reason for installing VB runtime and was it the one that's in the directory of Autopatcher?

:ninja: Pascal B :ninja:

  kiamoris said:
PS: I use italian version on winXPsp2, but if I didn't misunderstand, AutoPatcherXP (eng/intl ver) can be installed anyway: it will be the program itself that will handle (when possible) the locale, or, at least, it should not go in error.

585870598[/snapback]

well thats most likely your problem.

AP itself will (or should) run on any system reguardless of language.

however the modules included in the english release are aimed at an english system.

I believe the 35601 error stems from when a parent module is missing (usually 2+ to get the error).

If the modules werent actually present in the release, everyone would get the error. i believe parents are just not being loaded because of the italian system, and therefore child modules are complaining.

The solution is to either 1) buy an english system, or more sensibly 2) get an italian copy of AP, which youll probably have to help translate yourself.

I think it might be helpful if we released two different versions for non english releases.

Both having the new installation files and such, however one with translated titles and descriptions, and one with english.

  DaFlapDrol said:
What is the reason for installing VB runtime and was it the one that's in the directory of Autopatcher?

585870757[/snapback]

AP requires them to be installed in order for it to work.

Newer OS's come with them pre installed, but its worth a check.

  TheBlazingAngel said:
AP requires them to be installed in order for it to work.

Newer OS's come with them pre installed, but its worth a check.

585871232[/snapback]

Well, that's new for me. If you intstall Windows XP pro with SP2 then you don't need the VB run files. The most things that AutopatcherXP 2005 is offering is for XP.

About the Missing Element, it must be setting in a "module" I think that it has to do with the language ID, OS, or IE version. That's all included in the Module....

Yep, too much :angry: seen that message on front of my screen. Was my mistake. :D

:ninja: Pascal B :ninja:

^^

exactly, with XPSP2 you wouldnt have to install them. however there is only one copy of AP available, not one for each OS as before with v4.6.

The files are there incase you use AP on a system that doesnt have them installed.

reguarding the 'missing element' error 35601, ive explained above its to do with the language settings of the modules vs the lang of the machines OS.

  tineke26 said:
okay, than probably that's the reason for the error code on my system. I have the dutch windows version.

585873217[/snapback]

Tineke26, this dude :ninja: Pascal B :ninja: is working on a Dutch version of Autopatcher. The version that I'm making is based On Windows XP Professional with SP2 installed. Is that what you are looking for? If so, then go to the official forum that involves WindowsXP Autopatcher 2005 (https://www.neowin.net/forum/index.php?showtopic=299731). If you want more information then contact me by e-mail.

Greetings,

:ninja: Pascal B :ninja:

  TheBlazingAngel said:
^^

exactly, with XPSP2 you wouldnt have to install them. however there is only one copy of AP available, not one for each OS as before with v4.6.

The files are there incase you use AP on a system that doesnt have them installed.

reguarding the 'missing element' error 35601, ive explained above its to do with the language settings of the modules vs the lang of the machines OS.

585871429[/snapback]

That's my problem too, I don't have an English version of Winxp.

What if i want to make a version of AP in another language?

Can i just do this with the error that is occuring on my system?

  someinfo said:
That's my problem too, I don't have an English version of Winxp.

What if i want to make a version of AP in another language?

Can i just do this with the error that is occuring on my system?

585876702[/snapback]

in this case, the error is not to do with missing files, but with parent modules not being loaded because there not for your language.

the error occurs because when loading the child modules of that parent, the parent is not present.

to fix the problem you need to either download a release in your own language, or translate it yourself.

the error will not cause a problem with the translating, as soon as you have set the language field in all modules to your own language, autopatcher will be able to load everything.

  TheBlazingAngel said:
in this case, the error is not to do with missing files, but with parent modules not being loaded because there not for your language.

the error occurs because when loading the child modules of that parent, the parent is not present.

to fix the problem you need to either download a release in your own language, or translate it yourself.

the error will not cause a problem with the translating, as soon as you have set the language field in all modules to your own language, autopatcher will be able to load everything.

585876886[/snapback]

Thanks, im working on the Dutch AutoPatcher April 2005 Full Version now.

  someinfo said:
Yeah, that's correct, but the link is dead.

585877843[/snapback]

Now it's time to clear something. The link that's available here wasn't mines. This is a link to the first version off the Dutch version made by Raptor himself. This is the release of Jan'05. After downloading that one, I found out that it wasn't working. After trying and trying I decided to make a new version in Dutch.

The question is now; what should be included in the lite and /or full version? Example: the PowerToys are in English, not available in Dutch. A few persons want them included and others don't need English software installed.

That's why it's taking time, that was the part "the making of AutoPatcher".

Now the part of availability on the internet. The link is dead! It wasn't mines as I tolled earlier. The problem is that I need a link and diskspace for ever. Not just for fun neither for a little time. That's not my goal!!!!!!

At this moment I'm busy with a hosting provider to see if we can make an agreement for a free offer. That means no traffic limitation!!!

When you offer a service, you have to it right at once! :yes:

With this, I'll hope that the sun is shining and I cleared all.

:ninja: Pascal B :ninja:

  tineke26 said:
okay, than probably that's the reason for the error code on my system. I have the dutch windows version.

585873217[/snapback]

Tineke, soon as i have more news about the Dutch relase. I let you know. Thanks for your e-mail. Next-time leave me your e-mail address to contact you too.

:ninja: Pascal B :ninja:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • That is the "rated" capacity. I owned one myself and had 3 x 20TB Seagate Exos X22 in it, ut I will update it to say not included. The other point is, yes you can go cheaper, but in my experience DSM is miles ahead of the competition if you can excuse the constant omission of features over the last couple of years, such as Synology dropping H.265 support in DSM 7.2 as one example.
    • PornHub commits to age checks for UK users by 25 July by Paul Hill Ofcom, the UK’s digital regulator, has announced that PornHub and several other porn sites have agreed to put robust age checks in place by the deadline next month on 25 July. The confirmations to Ofcom will likely be used by the regulator against the companies if they fail to comply by the deadline as justification for a fine. The companies that have publicly stated they’re going to have safeguards in place by the deadline are PornHub, BoyfriendTV, Cam4, FrolicMe, inxxx, Jerkmate, LiveHDCams, MyDirtyHobby, RedTube, Streamate, Stripchat, Tube8, and YouPorn. There may be other companies that are preparing, these are just the ones that were happy to be named. Ofcom has been given the task of making sure porn sites comply with age check rules. If companies don’t follow the rules, Ofcom has the power to impose fines and even apply for a court order to ban websites or apps from being available in the UK. These rules are part of the wider Online Safety Act, which aims, in part, to keep children safe online. So far, it has launched investigations into four porn providers for failing to comply with its requests. Oliver Griffiths, Ofcom Group Director of Online Safety said: “Society has long protected youngsters from products that aren’t suitable for them, from alcohol to smoking or gambling. But for too long children have been only a click away from harmful pornography online. “Now, change is happening. These age checks will bring pornography into line with how we treat adult services in the real world, without compromising access and privacy for over-18s.” The new age verification methods come in various shapes and sizes (pun intended) including credit card checks, open banking, and facial age estimation. While these may not keep all kids from accessing porn, they’ll act as a significant hurdle. For adults concerned about handing over information to access porn sites, Ofcom said that the measures do not harm your privacy. All of the age assurance methods are subject to the requirements of UK privacy laws, including on processing personal data. The Information Commissioner’s Office (ICO) is overseeing this area to ensure companies comply. Ofcom’s own studies have found that 3% of 8-9 year-olds have been exposed to online pornography at some point. This highlights how easy it is to find this content and clearly something has to be done. It’ll be interesting to see how these measures actually play out when they get rolled out.
    • Looks like MS is officially extending Windows 10 support while stopping just short of officially changing the end date. I teased in the last article that the process for gaining free support was a little invasive, but this is basically just giving it out for free, so I guess I'm taking back those words.
    • Microsoft shares Windows 10 ESU key guide for office PCs that don't support Windows 11 by Sayan Sen Recently, the Indian government issued a caution about the upcoming end of support for Windows 10 which is about four months away. Interestingly, on that very day, Microsoft made a major announcement regarding this as the tech giant debuted free enrollment options wherein support would be extended for another year at no extra cost. Microsoft is also trying to make it easy to set up Extended Security Updates (ESU) with a new tool. You can see in the image below: New ESU enroll wizard Following that, today, the company has shared a new guide on how to activate ESU via Intune in the case of Windows 10 office PCs that are not supported on Windows 11. First up, Microsoft has reminded users of the prerequisites of Windows 10 ESU: The system needs to be on Windows 10 22H2 with KB5046613 (November 2024 Patch Tuesday) or newer. The device needs access to the network endpoints required for client activation. The process that is used for activation needs administrative privileges on the device. The guide contains several PowerShell scripts and are meant for IT admins and system admins. One of those is a validation script "Check-Win10ESUPrereq.ps1" that Microsoft has published to help "verify a device has the required version and patch level for Windows and it can communicate to the required network endpoints." Essentially, it checks if the aforementioned requirements are satisfied and can be used for troubleshooting against those prerequisites. After the "validation," Microsoft says there are two ways to proceed with the ESU key activation. First. it can be done by either Remediation through: Detection Script (Win10ESUActivation-detect.ps1) and Remediation Script (Win10ESUActivation-remediate.ps1). And second, by Win32 Application with Win32 Install Script (Win10ESU-install.ps1) and Win32 Detection Script (Win10ESU-detection.ps1). In the case of Remediations, Microsoft mentions "some licensing considerations" due to which "some smaller companies may not have that option." Finally, Microsoft has also shared some Activation IDs for manual verification via Slmgr VB script for obtaining volume activation information: Win10 ESU Year1: f520e45e-7413-4a34-a497-d2765967d094 Win10 ESU Year2: 1043add5-23b1-4afb-9a0f-64343c8f3f8d Win10 ESU Year3: 83d49986-add3-41d7-ba33-87c7bfb5c0fb You can check the full guide and the details here on Microsoft's official Tech Community website.
    • It blows me away how overpriced Synology is. $600+ for a 3+ year old SATA NAS with only gigabit networking!! Even for 2022 that is pretty low-end hardware. Yes, the Synology software is fantastic, but if we say this hardware is worth $300 max (and that is even giving a generous premium to the fact that it is made by a respected OEM), their software is NOT worth an additional $300, especially considering it is locked to the hardware it shipped on and you have to pay that premium again for your next device. Important correction to the specs table above. Saying Disk Capacity is 72TB and even going further to detail that is 4x18, strongly implies it comes with those disks, which it does not. I would rather see it say "Max Capacity: 72TB (disks not included)."
  • Recent Achievements

    • Conversation Starter
      Kavin25 earned a badge
      Conversation Starter
    • One Month Later
      Leonard grant earned a badge
      One Month Later
    • Week One Done
      pcdoctorsnet earned a badge
      Week One Done
    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      529
    2. 2
      ATLien_0
      207
    3. 3
      +FloatingFatMan
      169
    4. 4
      Michael Scrip
      149
    5. 5
      Steven P.
      123
  • Tell a friend

    Love Neowin? Tell a friend!