Recommended Posts

My vehicle is parked outside most of the time (no garage/carport/etc) and this can not be avoided.

Spiders seem to love my vehicle, and lately it's getting disgustingly bad.

I used to use bug spray on the shell of my car to deter them, but this spray lasts only a day or so and the webs return within a week.

Seriously, what's a good long-term solution for this?

Link to comment
https://www.neowin.net/forum/topic/313165-spider-webs-on-my-car/
Share on other sites

Can you cover it with those covers? You know what I'm talking about. you mean, you are finding web around the body of your car?! If so I don't think spiders would make webs underneath a cover.

585831123[/snapback]

The covers most likely would also get webbed by the spiders, and to be honest would be highly inconvenient.

...you've either got 50,000 spiders that aren't territorial, and happen to nest on your car.

Or you're not driving your car enough. Mine doesn't even get spiders after a week, and I live in the bush.

585831567[/snapback]

I drive it commonly enough, just it's always parked near bushland which doesn't help.

Is there any type of surface spray against bugs which wouldn't be harmful to car paint?

There's something that is attracting the spiders. Perhaps something

inside the door panel that you can't see. Or something inside that

the spiders can sense that you can't see. A nest of bugs under

the drivers seat maybe.

Perhaps it's the location that you place the car. Something about

the ground or building it's in. A dead animal that is attracting bugs

which are spider delicacies.

When you fumigate the area, be sure to get it down inside the door

and also under the seats of the car and in the engine compartment.

I park my truck in an open shed and sometimes it sits for days

before I drive it again. The roof of the shed has a nest of bats :x

that gather during the day. Snakes are attracted by the bats.

One two mornings I came out to find a snake on the top and

hood of my truck trying to get to the bat nest. One was about

5 feet long and the other was a 3 or 4 footer. Most likely

non-poisonous but startling nontheless.

My Scary story, well not really.

My truck used to set in a garage since my parents got it in 1995. Well in May of 2003 my parents bought a new truck. We have a two car garage, so that left my truck sitting in either the front or back yard, or on the street in the summer.

When I had to have the clutch replaced because it had been slipping. The truck is 10 years old and just about 80,000 miles so a new clutch was in inevitable spring 2004.

The guy we took it to install said he found a rats nest just to the side of the transmission. He even showed us the nest. No rats/mice though. I suppose the rat had to climb the tire, because my truck is just about two and a half feet off the ground for clearance.

Sometimes I get spider webs from my side mirror to the door. They fly off pretty quick though.

Get cobwebs on the mirror in the morning sometimes on the Land Rover, but it's easy to get the spiders out of there quick smart as there are heating elements behind the side mirrors. Meant to be for getting ice off them for those mornings when you just cant help but camp in the snow I guess.

I used to have this problem all the time... bad enough where people liked to stare as I drove by them.

The spiders liked to live inside my mirror and put webs all around the side of my car at night. I took the mirror apart, found a nest that hatched and there were about 10 spiders in there. Took them out... cleaned the nest, then put it back together. Car was great for about a week then it started up again. So i took the mirror apart again and there were spiders crawling out of it as I took it apart. I sprayed the inside with wd40, put it back together, and haven't had any problems for about a year now.

I'd take a look at your mirror, as thats where they are probably hiding.

OR at least one: Will a long-lasting surface spray damage my paint job?

Possibly... some will. Check the label. Don't know of any brands that could help you. I'd worry about them staining the paint or making them crack.

I'd take a look at your mirror, as thats where they are probably hiding.

585836868[/snapback]

Hmm, there always does seem to be a large amount of webbing particularly around the mirrors, especially the passenger side (recently more the drivers side).

I might try your advice and massacre the mirrors using WD40. Can't hurt too much.

Thanks.

When I wake up tomorrow I'll see if there are any webs and try to get some photos if there are.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft admits one of the most crucial Outlook features is currently broken by Sayan Sen Microsoft is making some decent progress when it comes to Windows 11. Recently we have confirmed reports of some rather useful improvements landing in the next version of the OS, 26H2, wherein GPU driver TDR crashes may finally be fixed, plus the company is also allowing users to disable web content on the Search. On the Outlook front though things have not been so rosy. Last month in May we reported several problems affecting basic functionalities on the app. These included a problem where documents would open blank or corrupt themselves. Following that, Quick Steps, a very useful feature, would no longer work correctly, and finally, Microsoft acknowledged a problem wherein images would fail to load up properly inside the email. Microsoft had resolved those bugs later and almost exactly a month after we reported on them, the company has now admitted a new similarly basic issue, this time on Macs. Users recently started noticing that Outlook would no longer display email threads properly as the original message itself was not displayed. An affected user Tsoumpas, C (ngmb) nicely described the problem in a forum post they made on Microsoft's site. They wrote: "Description of the issue: After updating Outlook for Mac [Version 16.110 (26061317)] on 18/6/2026, replying to any email no longer includes the original message in the reply window. Prior to the update, replies correctly contained the original email text below my response. Expected behavior: The original message should be included in the reply, as in previous Outlook versions and according to the configured reply settings. Actual behavior: The reply window contains only a blank composition area (or only my response), with none of the original email text included." Obviously this must be a highly frustrating for users as noted by several in that thread. The post, at the time of writing, has also been upvoted by more than 40 users indicating that is a fairly widespread bug. Thankfully Microsoft seems to have acknowledged the problem right around that time as it opened a new issue on its official website. In the support article, the company recommends switching to Outlook for Mac from the legacy app, where the problem appears to be happening.
    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!