Recommended Posts

You, my friend, are in luck.

I'm a moderator for the UK's biggest Corrado Forum, which you can find over @ http://the-corrado.net/forum - feel free to head over and register, and ask away! There is a full on Corrado buyers guide on there to tell you EVERYTHING you need to know about their various foibles and problems :)

I post under the name jimsg60 (nearly 8000 posts and going strong) so if you have any questions or problems, just PM me either here or on there :)

Pics of my Corrado G60 which I just sold a few weeks ago, just to keep you inspired! My replacement, MK4 Golf GT TDI i'm picking up this evening! :(

DSC_0068.jpg

DSC_0079.jpg

Edited by Chicane-UK

Well the G60's a thirsty machine, and mine was tuned up from 160BHP -> 207BHP and the fuel economy, and insurance reflected that. This is my 2nd Corrado (first was a 16v) and I just decided i'd had enough of them for a bit and wanted something cheaper to run and something more modern!

I'll say one thing about the Corrado though.. don't go bottom of the barrel for a cheap one.. get a good one thats been owned by a VW enthusiast. They're not unreliable cars as such, but they are old - and things break on them! Get used to being out of pocket as once you fix one thing, it ends up becoming an addiction keeping on top of the maintainance.

But they are rewarding and fun to drive, and you won't believe the amount of looks and appreciative glances you get from other motorists and pedestrians!

You, my friend, are in luck.

I'm a moderator for the UK's biggest Corrado Forum, which you can find over @ http://the-corrado.net/forum - feel free to head over and register, and ask away! There is a full on Corrado buyers guide on there to tell you EVERYTHING you need to know about their various foibles and problems :)

I post under the name jimsg60 (nearly 8000 posts and going strong) so if you have any questions or problems, just PM me either here or on there :)

Pics of my Corrado G60 which I just sold a few weeks ago, just to keep you inspired! My replacement, MK4 Golf GT TDI i'm picking up this evening! :(

585866177[/snapback]

Chicane - I Have a GT TDI and they are great cars. Are you getting a 115, 130 or 150bhp? A little heavy and the suspension is a little soft (even if like mine you went for one with sports suspension) but has great torque even in the higher gears.

So why the long face?

I'm a member of a great uk golf forum if you have any mk4 questions ... www.uk-mkivs.net

Chicane - I Have a GT TDI and they are great cars. Are you getting a 115, 130 or 150bhp? A little heavy and the suspension is a little soft (even if like mine you went for one with sports suspension) but has great torque even in the higher gears.

So why the long face?

I'm a member of a great uk golf forum if you have any mk4 questions ... www.uk-mkivs.net

585866385[/snapback]

Hiya..

I've not long ago already signed up on UK MKIV's - go find my Newbie post in the Introductions forum :D I post as jimsg60 there too!

I've gone for the 115BHP - looks like a nice motor and i'm sure i'll be very happy. But when you've owned a car like the Corrado which is pretty uncommon on the roads these days, its just a bit of a shame to be back out of the club which i've been a member for so long. I am looking forward to getting the Golf though.. off to the guys house in about 30 mins to go pick it up :)

Wow Corrado's are like my fav. car...

I would only go for the VR6 though.. Seems like they got so-so reviews w/ the G60, but the VR6 really put it onto the top of reviewers lists.

It is kind of weird, but I see Corrado's all the time where I live. (multiple times in the day usually).

I think we have a lot of VW fans here.

Right now I drive my fathers old 82' Scirocco.. It handles beautifully.

I just love the looks and power of the Corrado though :drool:

You'd be surprised actually.. ALL Corrado's are rated highly in insurance groups (Group 16 for the 16v's, 17 for G60, 18 for VR6) because they are a common target for thieves and body panels on them are exceptionally expensive.. ie anything more than a light tap will usually result in the car being written off!

You should try a quote for the VR6 actually.. it wont be the insurance that is a killer though. The fuel economy, cost of repairs and parts, etc are all the other main factors in why the VR6 is the most expensive to run!

My second car was a Corrado and that is my favorite car I've ever owned. I lost it in an accident in Florida. Some old lady had a heart attack and rammed me at 65 MPH in her Mercury Grand Marquis and total'd it. I was in one of those situations, my beauty was gone and I was so angry but I was lucky to be alive and this poor old lady died of a heart attack.

This car is so fun, it's a shame that they don't come out with them again. Their body style, speed, just everything was made to perfection but it's probably a good thing the VW don't come out with it again. VW kind of fallen apart. They aren't as dependable as they were and I dont know if anyone has seen the brand new Jetta model. VW are becoming really expensive to own too.

I would absolutely follow Chicane-UK recommendation. Pretty much if you own an older VW, your a die hard VW fan and take care of your car but there are some that aren't and they trash the s**t out of them. My dad got me hooked on them and I love them.

BTW- how much are they asking for it ?

Well it varies, I'm talking to a guy about a 1989 1.8 16v that has been modded quite a bit, like G60 front brakes, tuned engine (polished/ported head) with other mods, rust free body and he wants around ?2000 / $3800 ish. Personally I think it's a bit much for the age of the car. Especially considering the mods will push the insurance up a lot.

The norm. for Corrado's here is around ~$9,000 Canadian as a starting price for a G60.

VR6's start off at around ~$12,000 Canadian, and go up to around ~$16,000 for a well-kept version.

So basically I am looking at spending around ~$15,000 (6,335.39 GBP or 12,052.97 USD) for a VR6 model w/ around 150,000-190,000 Kms.

This seem good?

Well it varies, I'm talking to a guy about a 1989 1.8 16v that has been modded quite a bit, like G60 front brakes, tuned engine (polished/ported head) with other mods, rust free body and he wants around ?2000 / $3800 ish. Personally I think it's a bit much for the age of the car. Especially considering the mods will push the insurance up a lot.

585873916[/snapback]

An absolute bottom of the barrel, needing TLC 16v will probably cost you ?1000 and thats before you factor in the cost of repairs and getting new bits that a car that cheawillb> ultimately cost you. If its had head work on it, and upgrades such as G60 brakes, then thats good news.. the G60 brakes you could possibly pass over on the insurance as you could just say you had no idea, but the ported and polished head you'd have to declare. Given the relatively small increase in power from that mod though, I can't see the insurance companies nailing you too hard for such mods.

My advice is spend now or spend later.. get a car with as many reciepts, and as full a documented history now as you can as you will regret it down the line if you don't!

I'm not a biiig van of MK3's.. but for a mean looking stealth machine, a slammed black MK3 on black alloys is soooo good! Only really worth bothering with them though in VR6 form.. wouldn't have any other sort I don't think! :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • lots of people us facebook for stuff, threads though no
    • Can you read? I've said I'm willing to pay more for a notchless (no notch) 3:2 screen.
    • Not even an OLED display on the laptops. Also it seems that the laptop design isn't the same as the Surface Ultra model. Looks like bargain bin at high prices.
    • make your own notch - it's not that hard
    • VirtualBox 7.2.10 by Razvan Serea VirtualBox is a powerful x86 and AMD64/Intel64 virtualization product for enterprise as well as home use. Targeted at server, desktop and embedded use, it is now the only professional-quality virtualization solution that is also Open Source Software. Presently, VirtualBox runs on Windows, Linux, macOS, and Solaris hosts and supports a large number of guest operating systems including but not limited to Windows (NT 4.0, 2000, XP, Server 2003, Vista, 7, 8, Windows 10 and Windows 11), DOS/Windows 3.x, Linux (2.4, 2.6, 3.x, 4.x, 5.x and 6.x), Solaris and OpenSolaris, OS/2, OpenBSD, NetBSD and FreeBSD. Some of the features of VirtualBox are: Modularity. VirtualBox has an extremely modular design with well-defined internal programming interfaces and a client/server design. This makes it easy to control it from several interfaces at once: for example, you can start a virtual machine in a typical virtual machine GUI and then control that machine from the command line, or possibly remotely. VirtualBox also comes with a full Software Development Kit: even though it is Open Source Software, you don't have to hack the source to write a new interface for VirtualBox. Virtual machine descriptions in XML. The configuration settings of virtual machines are stored entirely in XML and are independent of the local machines. Virtual machine definitions can therefore easily be ported to other computers. VirtualBox 7.2.10 changelog: VMM: Fixed issue when CentOS 10 VM was not booting due to the message "Fatal glibc error: CPU does not support x86-64-v3" (​github:gh-642) Devices/EFI: Fixed booting issue when ARM VM had less than 1024 MiB of RAM assigned (​github:gh-679) USB: Fixed issue when it was not possible to attach USB device to headless VM on Apple Silicon/macOS 26.4.1 (​github:gh-631) Storage: Fixed issue when VIRTIO-SCSI device was not recognized as SSD device by guest system (​github:gh-634) Network: Fixed issue in E1000 emulation code which triggered debug log creation (​github:gh-645) Network: Fixed issue in E1000 emulation code which prevented OS/2 guest from booting (​github:gh-683) Linux Host: Fixed issue when VMs could not be started due to kernel oops (​github:gh-639) Linux Host and Guest: Fixed issue when kernel modules were failing to build with openSUSE 16.0 kernel Linux Host and Guest: Added initial support for kernel 7.1 Linux Host and Guest: Added extra fixes for RHEL 9.8 kernel (​github:gh-676) Linux Host and Guest: Added possibility to build source code using NASM instead of YASM as the assembler (​github:gh-520) Linux Guest Additions: Added initial support for Extended Data Control Protocol for clipboard sharing with Plasma on Wayland guests (​github:gh-33) Linux Guest Additions: Added extra fixes for preventing vboxvideo kernel module build with kernel version 7.0 and newer (​github:gh-655) OS/2 Guest Additions: Fixed issue when Shared Folders automount and clipboard sharing stopped working (​github:gh-551) Download: VirtualBox 7.2.10 | 170.0 MB (Open Source) Download: VirtualBox 7.2.10 Extension Pack | 19.1 MB View: VirtualBox Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
    • First Post
      Dys Topia earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      510
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      102
    4. 4
      Steven P.
      87
    5. 5
      ATLien_0
      70
  • Tell a friend

    Love Neowin? Tell a friend!