Non-Domain User access File Share on a Domain Computer


Recommended Posts

I have a Windows 2003 Server, Standard Edition (SP1) running Active Directory which is the only server in the network.

I also have a Windows XP Professional (SP2) client that is a Domain Member, which has a Local User ("Non-Domain User").

I need the Local User on the Windows XP client to have access a file share on the Windows 2003 server. When the Local User tried to connect to the server, they are prompted for a username/password of a Domain User to get access.

I have tried setting the Sharing permissions on the shared folder to allow access to Guests, Domain Guests, Domain Computers, Everyone and ANONYMOUS LOGON. I have also set those groups File System permissions to compliment the Share Permissions.

No luck. I think that the reason why that didn't work is because the Server is prompting for Authentication before it even lists the available File Shares, not after I try to access the Shared Folder that I'm trying to share, therefore the permissions of the individual file shares make no difference.

I would prefer to do this with a seemless method that doesn't not require the Local User to save a password in the Passwords List or have to Add new Domain Accounts to the server.

All help recieved will be appriciated.

Thanks,

Quick Reply

Hmm sounds like a good workaround, I could set up a new Domain User that only has permissions to access the file share. I'll see how it goes.

If there are a way to configure the server permissions itself than I would prefer that... I'm only doing this on one Test Machine now, but soon I will roll out access to the file shares across the whole network, and I don't have access to all of the machines (Some workers have their own laptops). The users themselves would have to set this up which could be trouble.

  Quick Reply said:
Hmm sounds like a good workaround, I could set up a new Domain User that only has permissions to access the file share. I'll see how it goes.

If there are a way to configure the server permissions itself than I would prefer that... I'm only doing this on one Test Machine now, but soon I will roll out access to the file shares across the whole network, and I don't have access to all of the machines (Some workers have their own laptops). The users themselves would have to set this up which could be trouble.

586019444[/snapback]

Lets say you have the following share: \\TESTSERVER\testshare1

Now create an AD user (for instance testshare1_user), and give it the necessary NTFS permissions on Testshare1.

Now if anyone wants to connect to this share, go to \\TESTSERVER\testshare1 and they will be prompted for username/password.

They will have to use as username domainname\testshare1_user and its correct password.

The trick is to add your domainname followed by a backslash before entering the username. That way, the computer who tries to access your testshare1 knows that the credentials for accessing this share are on the domain controller. Otherwise the computer tries to find these credentials on the local computer where they don't exist off course.

This way you create an AD user for each share you want to make accessible for non-domain PCs. And they always connect to \\TESTSERVER\sharename with username DOMAINNAME\USERNAME and it's correct password.

  MazX_Napalm said:
Computer needs to be part of the domain, even though it doesn't log on to the domain.

586019644[/snapback]

This is not correct, you can connect to domain resources from any computer. You only need a domain username and password.

  ChocIST said:
Why cant you just enter a valid UN and PW for the domain to access it?

ChocIST

586020903[/snapback]

Well, that's what I said right? Just make sure that user has rights on the share. And take into account that you need to logon with domain\username and not just with username.

  MazX_Napalm said:
Computer needs to be part of the domain, even though it doesn't log on to the domain.

586019644[/snapback]

  Komakino[BE] said:
The trick is to add your domainname followed by a backslash before entering the username.

586020611[/snapback]

  ChocIST said:
Why cant you just enter a valid UN and PW for the domain to access it?

586020903[/snapback]

The computer is already part of the domain, just not the user.

I have been using the backslash when entering usernames.

The problem is that the end users that I am dealing with can not cope with change and already struggle with their basic skills to do basic tasks.

What's mor eis that when I enter the username/password of the Domain User when connecting to a Domain Resource, The password isn't saved after being rebooted.

And also, I need to share a printer after I get the File Shares working. And a username/password for a file share hasn't been entered between logging on and trying to print something, the printing job will fail and NOT prompt for a username/password due to some bug in Windows XP that doesn't ask for it when it should. There is no way I can think of to get the users to deal with that when they just want to print a word document.

Thanks for the workarounds, but they don't work very well, I just want a server-side solution. :woot:

Dude - why exactly is this not a domain user? You state the machine is a member, you want to give access to some share's to this user, plus printer(s)..

Why would this user NOT be using a domain account?

All of your issues go way - just have the user log into the domain.. All your problems solved! The user does NOT have to be member of domain users, so they could be limited to only access specific shares, etc. They could be give whatever permissions they need on the local machine, etc.. etc..

For the life me I can not see why you would NOT have this user log in with domain account??

Most of the computers I want to allow shares to are laptops, How are the users supposed to log in if they are out and about, not connected to the network, or the domain server were to go down? The Domain Server itself is still under testing and constant reconfiguration, if the server needs to have AD reinstalled, nobody would be able to log on until I set everything up again and rejoin each laptop to the domain. The test machine is only a member of the domain for testing, when I set the laptops up, they arn't going to be domain members.

Surely there is a Group Policy or Security Policy seting that I can make, simular to "Let Everyone permissions apply for ANONYMOUS LOGON" which doesn't seem to work.

  Quick Reply said:
Most of the computers I want to allow shares to are laptops, How are the users supposed to log in if they are out and about, not connected to the network, or the domain server were to go down?

586028525[/snapback]

So long as the user has logged into that machine while it was connected to the domain, they can log into that machine while it is not connected to the domain.

Basically that user just needs a profile folder in the Documents and Settings folder.

  Quick Reply said:
when I set the laptops up, they arn't going to be domain members.

586028525[/snapback]

Why? What is the point of your domain then?? If your not going to have any members?

Your laptops will login from cache, if they are not on the network - or DC is not available.. So will every other machince - unless you have turned disabled login from cache..

As to access to ANON or ANYONE - as already stated, turn on the guest account.. This is its purpose..

Another method to map a drive without the user having to do anything.. since your saying /savecred is not working, would be to create a simple batch file.. put it on the computer to run when they login

NET USE *\\computername\sharename /user:domainname\username password

Or give them an shortcut to it on their desktop.. click and they have access to whatever share they need with whatever account they need to use, etc..

But if your going to have all your laptops as local accounts - what exactly is the POINT of your domain? Peer to Peer network with a 2k3 box in the middle is what you have ;)

  Quick Reply said:
Most of the computers I want to allow shares to are laptops, How are the users supposed to log in if they are out and about

586028525[/snapback]

Uh, every laptop user that I have in the domain works 4 days or more away from the office. Not one of them has complained that they can't log on to their laptop using their domain accounts.

To solve your problem, create a user called user1 and give it a password of password.

Give this user full access to the share.

Instruct the users to Start, Run, \\server\share. They will be be asked for a username and password.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • UI is slow but you prefer a slower UI to a snappier UI basically. Everyone is different.
    • XFX 9060 XT 16 GB is $349 on Amazon (shipped & sold by Amazon) https://www.amazon.com/dp/B0F8...p;previewDohDeal=1&th=1 People - never trust any neowin deals posted - they are the worst at seeking deals, and just want to peddle their own to make a quick buck. It's disgusting.
    • It's a grey market key - proceed at your own risk. It's baffling that neowin supports this shady stuff.
    • Arc 1.57.0 by Razvan Serea ARC browser is finally here for Windows, bringing its unique and modern approach to browsing. With a clean interface and a powerful sidebar, ARC makes managing tabs and organizing your workflow a breeze. You can group tabs, pin important pages, and quickly switch between work and personal spaces without clutter. It’s designed to be fast, customizable, and genuinely useful, making it more than just a browser—it’s a productivity tool. If you’re on Windows and want a fresh way to browse and stay organized, ARC is worth checking out. ARC browser key features: Split View: Work with multiple tabs side by side in a single window for efficient multitasking. Tab Grouping: Organize tabs into customizable groups for better workflow management. Pinned Tabs: Keep essential pages permanently accessible in the sidebar. Spaces: Create separate workspaces for different projects or personal use, reducing clutter. Sidebar Integration: Access bookmarks, notes, and tools directly from the sidebar for quick navigation. Customizable Themes: Personalize the browser’s appearance with themes and color schemes. Quick Search: Find tabs, history, or bookmarks instantly with a powerful search bar. Lightning-Fast Performance: Built for speed with optimized resource usage and minimal lag. Built-in Note-Taking: Jot down ideas or save snippets directly within the browser. Focus Mode: Hide distractions and focus on a single tab or task. Cross-Device Syncing: Seamlessly sync your data across multiple devices for a unified experience. Keyboard Shortcuts: Boost productivity with customizable shortcuts for common actions. AI-Powered Suggestions: Get smart recommendations for tabs, bookmarks, and workflows. Privacy Controls: Built-in tools for blocking trackers and managing cookies for enhanced security. Extensions Support: Compatible with popular browser extensions to extend functionality. Arc Browser 1.57.0 release notes: ''Thanks as always for using Arc. This week's release includes a bump to Chromium 137.0.7151.69, which patched three security vulnerabilities. Enjoy!'' Download: Arc Browser 1.57.0 | 1.9 MB (Freeware) View: Arc Browser Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • they put useless AI, new plastick sticker 8K and price +$80 for nothing
  • Recent Achievements

    • First Post
      Uranus_enjoyer earned a badge
      First Post
    • Week One Done
      Uranus_enjoyer earned a badge
      Week One Done
    • Week One Done
      jfam earned a badge
      Week One Done
    • First Post
      survivor303 earned a badge
      First Post
    • Week One Done
      CHUNWEI earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      427
    2. 2
      +FloatingFatMan
      237
    3. 3
      ATLien_0
      213
    4. 4
      snowy owl
      207
    5. 5
      Xenon
      159
  • Tell a friend

    Love Neowin? Tell a friend!