Recommended Posts

After quite a lengthy experimentation process I have discovered what the "Tweak Gurus & PC Geeks" don't tell you in their posts on the subject of cleaning the Prefetch folder.

This guide has not been plagiarized. It is totally compiled by me and was once posted by me at the SoftZone Forums.I decided that I did not wan't to be a member of that comunity because they have more rules than posts so I removed this post and others I had made and canceled my membership.So if you have seen it before that is where it came from.

I hope it can be of assistance to some of you that have cleaned your Prefetch folder because you have been told it will speed XP up. But now "like I did" you find that after you have cleaned the prefetch folder your PC now suffers from slow boot up's and general lack of performance. Here is the real deal about the Prefetch Folder

DO NOT REMOVE OR DELETE THE ->(layout.ini)<- FILE WHICH RESIDES IN XP'S PREFETCH FOLDER OR YOU WILL SLOW DOWN YOUR PC AT START UP AND WHEN YOU OPEN WINDOWS PROGRAMS. Once it is gone it can stay gone on some PC'S (like mine) for ever and your Prefetch Folder will never work again no matter what you do in the registry to try to rectify the problem.

If this has happened to your prefetch folder DON'T WORRY because I will now show you in 5 easy steps how you can rebuild the -> (layout.ini) <- file again.

1): make sure that the task scheduler is enabled.If you are un sure go to-> Start/Contrl Panel/Administrative Tools/ Click on Services/ Then in the list of services make sure the Task Sheduler is enabled & restart the service by clicking on Start. Close the Services Folder & go back to desktop.

2): Then go to START/RUN/ and TYPE IN/->cmd<-(without the arrows) CLICK OK. This will bring up the DOS Command screen.

3):You will need to copy and paste this entry in at the flashing cursor

-> rundll32.exe advapi32.dll,ProcessIdleTasks <-(without the arrows) and press ENTER.

4):Now reboot three times and your Prefetch folder will be rebuilt.(It takes 3 reboots for the prefetch folder to work out what it needs)

5):Then go BACK to ->Start/Contrl Panel/Administrative Tools/ / Services/ Once again find TASK SHEDULER in the list and stop the service and then set it to disabled.This will stop any more entries going into your Prefetch folder.

If you need to leave your task sheduler enabled,(No Drama) you will just have to clean out your Prefetch folder manually from time to time.Just remember not to remove the layout.ini file

You should only clean out files ?other than Windows Start up files? in the Prefetch folder.

If you clean out the standard Windows entries you will CRIPPLE & SLOW DOWN the Windows XP Quick starts and also slow down opening windows processes.

No one bothers to tell you the consequence of deleting the (layout.ini file) in all the tips I have seen about cleaning out the Prefetch folder.

Also if you use one of the many programs that are availabe to clean the prefetch folder you will find that they delete the layout.ini file also.

I have now tried about 50 of these so called Prefetch clean programs and they all disable the Prefetch folder completely and for ever which is a crazy thing to do.The Prefetch is one of the best things about XP.

The truth is that only people who don't know what the Prefetch folder is actually for and don't know how it works say that it is useless.

All I can say is that there must be a lot of people with a verry sluggish XP Windows PC's around,,especially at Boot up.

Edited by adamzapple
Link to comment
https://www.neowin.net/forum/topic/331072-repair-xp-prefetch-folder/
Share on other sites

HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Session Manager \ Memory Management \ PrefetchParameters

dword value = EnablePrefetcher

0 = Disable,

1 = App launch prefetch

2 = Boot Prefetch

3 = Both (recommended)

Task Scheduler is needed for Prefetch to work.

Not sure what the rest is needed for...unless I've just never bumped into that particular problem.

I personally do purge my Prefetch folder every so often, including the Layout.ini file.

If you open the Layout.ini file and scroll through it, chances are you're going to see a lot of things that are long gone on your system, including file and folder paths. The Layout.ini file is pointing to those things upon boot.

Ever disable a Service and have DCOM errors spring up all over the place in the Event Viewer? Sometimes, (not always), the errors are coming from the Layout.ini file pointing to that disabled Service.

The Layout.ini file will usually rebuild itself after a couple of reboots and in about 20 minutes of idle time. (Pre SP2, the Layout.ini file would rebilut itself in exactly 13 minutes...a little Pre SP2 trivia...lol )

Thats not 100% correct Iron200,, delete everything in your prefetch folder including the layout.ini file and see what happens. It will not always come back as you say.Once the layout ini file is deleted it has to be rebuilt manually using the comand prompt in DOS.

Bold fortune that Registry tweak you have posted only works when you have still got a working Prefetch folder.If you delete the Layout.ini file and clean out the Prefetch folder that tweak does nothing and it won't just magically rebuild itself once the Prefetch folder has been stripped bare.

Yes you are correct on the fact that you must have the Task Shedular enabled to use bootvis.

Whenever I've gone to clear out the Prefetch folder, I've done a "Ctrl+A", "Shift+Del". Unless the prefetcher is disabled or the Scheduled Tasks service is disabled, the files have always come back on all the computers I'd done this on (several times...).

The Prefetch folder will rebuild itself when it is empty. If it isn't working, then you've got a bigger problem than what's been outlined here. How do you think that the system keeps track of files that it should prefetch? It keeps adding to the list (but not removing...) with the new programs that are run.

If it isn't working, then you've got a bigger problem than what's been outlined here

That is what I have just shown you how to do: REPAIR IT WHEN IT'S NOT WORKING.I wish you people would read the original post.

All I said was if you clean out your prefetch folder not to clean out your Standard Windows Startup files and to leave the layout.ini file in the folder.Do not delete these files or you will slow down your PC especially when windows XP boots up.

If you do delete these files and you find Like I did and hundreds of other XP users that your PC runs slow because the Prefetch folder now doesn't work and that it stays empty no matter how much Registery tweaking you do.I have shown you how to rebuild the layout.ini file and the process involved in repairing the Prefetch folderit so it will work properlyagain OK.Nothing more.

To all the other users that have a PC with an automatic prefetch repair,,Good luck to you and I wish I had one too.

That is what I have just shown you how to do: REPAIR IT WHEN IT'S NOT WORKING.I wish you people would read the original post.

All I said was if you clean out your prefetch folder not to clean out your Standard Windows Startup files and to leave the layout.ini file in the folder.Do not delete these files or you will slow down your PC especially when windows XP  boots up.

If you do delete these files and you find Like I did and hundreds of other XP users  that your PC runs slow because the Prefetch folder now doesn't work and that it stays empty no matter how much Registery tweaking you do.I have shown you how to rebuild the layout.ini file and the process involved in repairing the Prefetch folderit so it will work properlyagain OK.Nothing more.

To all the other users that have a PC with an automatic prefetch repair,,Good luck to you and I wish I had one too.

586061299[/snapback]

No need to get hasty here... we're just trying to put our input here as well.

Your method does work for the situation where something has gone buggered and the Prefetch system isn't working, but if that's the case, then there's most likely an underlying problem. The Prefetcher shouldn't stop working because the folder is empty.

All I'm saying is that I've never run into troubles with the prefetch folder from deleting its entire contents. All the files that are needed, including layout.ini are recreated. Yes, I will say that after you delete the contents of the Prefetch folder, the system will take a bit longer to boot for the next few boots, but that's because (as you yourself said) it takes three full reboots for Windows to track all the files needed on startup.

Thats not 100% correct Iron200,, delete everything in your prefetch folder including the layout.ini file and see what happens. It will not always come back as you say.Once the layout ini file is deleted it has to be rebuilt manually using the comand prompt in DOS.

586052755[/snapback]

actually, i've deleted everything (including the layout.ini file) and they were all re-created.

of course, this is a useful tweak for people with messed up prefetching.

I just found this with a Google Search. (I should have bookmarked where...darnit.)...

After deleting files out of the prefetch directory you should run the command

Rundll32.exe advapi32.dll,ProcessIdleTasks

So, I went ahead and opened my Prefetch folder and deleted its entire contents, including the Layout.ini file.

While leaving the now empty Prefetch folder open for my view, I typed in the above command to my Run Box.

..I'll be buggered...the Layout.ini file was re-created IMMEDIATELY! No need to even reboot the 3 times as prescribed.

Well, I think we all learned something from this thread.

This just keeps getting more interesting. By doing what I did above, it shaved 2 seconds off my complete, round-trip, reboot time.

I compared the new Layout.ini file with my old Layout.ini file from my drive's image. The new one looks sooo clean compared to the old one.

The old Layout.ini file has about a zillion entires and weighs in at 123 KB. The new one is only 5.81 KB...and only lists the basics.

Incidentally, that old Layout.ini file was one re-created after I had manually deleted it and it had re-created itself after 20 minutes of idle time. But, it was never re-created as clean as this new Layout.ini file.

If you clean out the standard Windows entries you will CRIPPLE & SLOW DOWN the Windows XP Quick starts and also slow down opening windows processes.

I cleaned out everything in my prefetch folder, including the .ini file, and disabled it in the registry to no performance detrement at all!

i understand that doing this makes things faster.. but what excatly is prefetch and what am i doing to make things go faster?

586069575[/snapback]

The prefetcher is a feature in Windows that "pre-fetches" parts of programs that you use often. When you start your computer, parts of the programs are loaded into memory so that when you go to run the program itself, it starts up quicker.

It will make your boot time a little bit slower though since there's more work to do here.

The guide is more for people who are having troubles with their Prefetchers. Sometimes - due to viruses and other bad stuff mostly - the prefetcher will stop working altogether.

My recommendation for the prefetcher is based on the amount of RAM that you have:

128MB - Disabled (reg value 0)

256MB - Boot only (reg value 1)

512MB or more - Both (reg value 3)

Hope this helps.

Prefetch Parameters

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters]

"EnablePrefetcher"=dword:00000005

First, I fail to see where any advantage is gained by messing with the prefetch settings. While disabling the prefetch service (or only using setting 1 or 2) can speed boot times it only hurts overall system performance.

Most tweak guides and popular tweaking programs use a setting of ?5?. There is no documentation to suggest that this setting works. MS states that valid values are 0,1,2,3 and that this setting is ?anded?. The default value is ?3?. I tested using a setting of ?5? on 3 occasions and there was no real improvement in boot times and hard drive activity was longer at boot.*

Prefetching is a good thing, leave it alone. In addition well written disk defrag utilities such as Raxco?s Perfect Disk use the layout.ini information for its optimizations.

Source

I always thought the layout.ini file was only actually processed by defrag to determine where best to place files. Therefore, it shouldn't matter if it's MBs in size, since the defrag task is only run when your computer is idle (or you force it with Rundll32.exe advapi32.dll,ProcessIdleTasks).

  • 1 year later...

After quite a lengthy experimentation process I have discovered what the "Tweak Gurus & PC Geeks" don't tell you in their posts on the subject of cleaning the Prefetch folder.

This guide has not been plagiarized. It is totally compiled by me and was once posted by me at the SoftZone Forums.I decided that I did not wan't to be a member of that comunity because they have more rules than posts so I removed this post and others I had made and canceled my membership.So if you have seen it before that is where it came from.

I hope it can be of assistance to some of you that have cleaned your Prefetch folder because you have been told it will speed XP up. But now "like I did" you find that after you have cleaned the prefetch folder your PC now suffers from slow boot up's and general lack of performance. Here is the real deal about the Prefetch Folder

DO NOT REMOVE OR DELETE THE ->(layout.ini)<- FILE WHICH RESIDES IN XP'S PREFETCH FOLDER OR YOU WILL SLOW DOWN YOUR PC AT START UP AND WHEN YOU OPEN WINDOWS PROGRAMS. Once it is gone it can stay gone on some PC'S (like mine) for ever and your Prefetch Folder will never work again no matter what you do in the registry to try to rectify the problem.

If this has happened to your prefetch folder DON'T WORRY because I will now show you in 5 easy steps how you can rebuild the -> (layout.ini) <- file again.

1): make sure that the task scheduler is enabled.If you are un sure go to-> Start/Contrl Panel/Administrative Tools/ Click on Services/ Then in the list of services make sure the Task Sheduler is enabled & restart the service by clicking on Start. Close the Services Folder & go back to desktop.

2): Then go to START/RUN/ and TYPE IN/->cmd<-(without the arrows) CLICK OK. This will bring up the DOS Command screen.

3):You will need to copy and paste this entry in at the flashing cursor

-> rundll32.exe advapi32.dll,ProcessIdleTasks <-(without the arrows) and press ENTER.

4):Now reboot three times and your Prefetch folder will be rebuilt.(It takes 3 reboots for the prefetch folder to work out what it needs)

5):Then go BACK to ->Start/Contrl Panel/Administrative Tools/ / Services/ Once again find TASK SHEDULER in the list and stop the service and then set it to disabled.This will stop any more entries going into your Prefetch folder.

If you need to leave your task sheduler enabled,(No Drama) you will just have to clean out your Prefetch folder manually from time to time.Just remember not to remove the layout.ini file

You should only clean out files ?other than Windows Start up files? in the Prefetch folder.

If you clean out the standard Windows entries you will CRIPPLE & SLOW DOWN the Windows XP Quick starts and also slow down opening windows processes.

No one bothers to tell you the consequence of deleting the (layout.ini file) in all the tips I have seen about cleaning out the Prefetch folder.

Also if you use one of the many programs that are availabe to clean the prefetch folder you will find that they delete the layout.ini file also.

I have now tried about 50 of these so called Prefetch clean programs and they all disable the Prefetch folder completely and for ever which is a crazy thing to do.The Prefetch is one of the best things about XP.

The truth is that only people who don't know what the Prefetch folder is actually for and don't know how it works say that it is useless.

All I can say is that there must be a lot of people with a verry sluggish XP Windows PC's around,,especially at Boot up.

This worked a treat! Thank you!!! I'm forever tinkering with Windows XP, and after a recent purge using System Mechanic, I noticed my Prefetch folder no longer was in use, and thanks to Google and your post, I have rectified the problem and my PC is running nice and fast again!

Thanks a million!

DO NOT REMOVE OR DELETE THE ->(layout.ini)<- FILE WHICH RESIDES IN XP'S PREFETCH FOLDER OR YOU WILL SLOW DOWN YOUR PC AT START UP AND WHEN YOU OPEN WINDOWS PROGRAMS. Once it is gone it can stay gone on some PC'S (like mine) for ever and your Prefetch Folder will never work again no matter what you do in the registry to try to rectify the problem.

First time I heard that..I clear out my prefetch folder weekly :unsure:

the prefetch files are "defragged" every 3 days, so depending on when you clear out your prefetch folder, it could take anywhere from minutes to days for the layout.ini to be recreated.

And yes it's safe to delete the file, it's automatically created when the files are "defragged".

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Firefox 152.0 by Razvan Serea Firefox is a fast, full-featured Web browser. It offers great security, privacy, and protection against viruses, spyware, malware, and it can also easily block pop-up windows. The key features that have made Firefox so popular are the simple and effective UI, browser speed and strong security capabilities. Firefox has complete features for browsing the Internet. It is very reliable and flexible due to its implemented security features, along with customization options. Firefox includes pop-up blocking, tab-browsing, integrated Google search, simplified privacy controls, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Firefox key features Enhanced Tracking Protection (ETP) – Blocks trackers, cookies, cryptominers, and fingerprinters by default. Private Browsing Mode – Deletes history, cookies, and temporary files when closed. Lightweight & Fast Performance – Optimized memory usage with efficient page loading. Cross-Platform Sync – Sync bookmarks, passwords, history, and open tabs across devices. Customizable Interface – Toolbars, themes, and extensions can be tailored to user needs. Strong Privacy Controls – Options to manage cookies, permissions, and site data easily. Reader Mode – Strips away clutter for distraction-free reading. Pocket Integration – Save and read articles offline with Pocket built into Firefox. Picture-in-Picture (PiP) – Watch videos in a floating window while multitasking. Extensions & Add-ons – Vast library for productivity, security, and personalization. Built-in PDF Viewer – No need for external software to view PDFs. Firefox Monitor – Alerts users if their email is part of a known data breach. Multi-Account Containers – Isolate browsing sessions (e.g., work, personal, shopping). Performance & Resource Efficiency – Uses fewer system resources than some competitors. Open Source & Community-Driven – Transparent development with global contributions. Download: Firefox 64-bit | Firefox 32-bit | ARM64 | ~70.0 MB (Freeware) Download: Firefox for MacOS | 145.0 MB View: Firefox Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft Visio 2024 Professional for Windows is still at 90% off by Steven Parker Created by ChatGPT Today's highlighted Neowin Deal comes from our Apps & Software section of the Neowin Deals store, where you can save 90% on Microsoft Visio 2024 Professional for Windows [Digital License]. Microsoft Visio: Turn Complex Ideas into Clear Visuals Microsoft Visio 2024 is a robust diagramming software designed to empower individuals and businesses to visually represent complex data, processes, and workflows. With a host of advanced features, it caters to professionals from various industries, including IT, engineering, business, and architecture. Visio 2024 makes it easy for individuals and teams to create and share clear, professional diagrams that simplify complex information. It offers updated shapes, templates, and styles, along with a new search bar to improve your experience. Visio 2024 also has a fresh design that matches other Office apps you use. Create stunning diagrams Extensive Diagramming Capabilities: Visio 2024 offers a wide array of diagram types, including flowcharts, process maps, floor plans, network diagrams, and organizational charts. The software comes with a comprehensive set of pre-built templates and shapes, making it easier to get started on projects quickly. Professional Templates and Shapes: The software includes over 250,000 shapes across multiple diagram types, ensuring that users from any field-whether creating a simple flowchart or a complex engineering design-have the tools they need to represent their ideas visually. Data-Linked Diagrams: One of the most powerful features of Visio 2024 is its ability to link data to diagrams, allowing users to visualize real-time data directly within their diagrams. Whether you're pulling data from Excel, SQL Server, or other databases, the software ensures that your diagrams are automatically updated as data changes, giving users better insights and control. Advanced Formatting Options: Visio 2024 comes equipped with a range of formatting tools to create highly customized diagrams. These include shape formatting, text adjustments, and the ability to apply various themes, ensuring diagrams not only serve their functional purpose but also look professional. Enhanced Visual Styles: This version of Visio includes new visual styles and layouts that make complex diagrams easier to interpret. Whether you're designing an IT network, a business process flow, or a floor plan, the enhanced visual options improve clarity and presentation quality. Easy, secure collaboration Real-Time Collaboration: With Visio 2024's improved collaboration tools, multiple users can work on the same diagram simultaneously from anywhere, with changes being tracked in real-time. This makes it a highly efficient tool for teams working remotely or across different locations. Mobile and Cloud Access: Users can view and edit diagrams on the go with the Visio web app. This ensures that even when you're away from your desktop, you can access and make critical changes to diagrams via mobile devices. Integration with Microsoft 365: Visio 2024 integrates seamlessly with the Microsoft 365 suite, allowing users to easily embed diagrams into PowerPoint presentations, Word documents, or Teams chats. You can also store diagrams in OneDrive or SharePoint for easy sharing and access from any device. Security and Compliance: Built with enterprise-grade security, Visio 2024 ensures that your diagrams are protected. Microsoft's trusted cloud infrastructure means that your data is encrypted and safeguarded, with compliance with international standards. Good to know Length of access: lifetime Redemption deadline: redeem your code within 7 days of purchase Access options: desktop Bound to account - Limited to one device activation at a time Only available to existing and new users Version: 2024 Updates included Click here to verify Microsoft partnership Microsoft Visio 2024 Professional for Windows normally costs $579.99, but it can be yours for just $39.97 for a limited time, that's a saving of $520 (90%). For terms, specifications, and license info please click the link below. Microsoft Visio 2024 Professional for Windows for $54.97 (was $579.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • I totally disagree. Very little good comes out of governments all around the world manipulating everything they can and usually the people are not the benefactors. What you say about being restricted and expensive sounds almost like the arguments against firearms and why banning them will protect people as if making something illegal somehow will prevent the criminals from having and using them. AI being far less mainstream could simply mean the average person will not benefit, but "big brother" and the corporations will benefit, which is almost for sure NOT a good thing.
    • I do apologize to the author Mr. Sen for my rude comment, questioning his knowledge of the subject. It is I whom lacked knowledge of the subject. Sorry!
    • Hello All Have a MSI Pro B650 VC Wifi Rev 1.0 motherboard Ryzen 7 7700X Radeon 7800XT OC 16GB 32GB Teamgroup DDR 5 5600mhz Samsung 990 Pro 1TB Boot NVMe Samsung 990 Pro 2TB Game NVMe Lian Li Lancool Black ARGB 216 Case Seasonic Focus GX 750 Watt Power supply   Wondering today what is best spot to plug in the following items on system for performance and not bottle neck anything if i can help it Creative Pebble Pro USB C or A Speakers, ((Powered by External USB C to C PD Adapter)  Logitech G513 USB Gaming Keyboard Logitech G502X Wired Gaming Mouse Cyberpower UPS USB Cable for UPS Power Management/System shutdown External drives connected occasionally are as follows---WD My Book 8TB (primary backup drive)   Seagate 8TB in External USB 3.0 Enclosure,  Seagate Portable 1TB USB 3.0 drive,   WD My Passport (Blue) 2TB, and WD My Passport (Red) 2TB,    WD Elements 500GB USB 2.0 External (Oldest one, Christmas 2003)       **Do have a 7 Port Powered  USB Hub as well, but when i use that--that leaves only the USB Flash spot for something to directly connect to system if needed.    Rear USB C 2x2 unused right now as moved the Creative speakers off it to USB A port next to it, with a USB C to A Cable, as figured speakers didn't near audio from USB C port and tie up the high speed port**   Front Ports trying to limit use of, so i don't have Front I/O port go bad again, already had it replaced once by Lian Li support all the way from Taiwan over night ((Do get extra nervous at times on things,  so i might just be extra nervous for nothing lol))
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      497
    2. 2
      +Edouard
      201
    3. 3
      PsYcHoKiLLa
      127
    4. 4
      Steven P.
      82
    5. 5
      ATLien_0
      76
  • Tell a friend

    Love Neowin? Tell a friend!