Recommended Posts

^^excelent  :)

no chance you could share the full version too is there ?

586096566[/snapback]

if there is need for it, i could :)

let me just download it over BT, then i'll put it into my edonkey incoming directory..

-andy-

Blaze, I?m thinking to upgrade my old 333MHz P2 from WMe to W2k since I have

W2k-drivers for the motherboard but no WXP-drivers but also because W2k is less

heavy on processor and memmory compared to WXP.

Q1: How old version of W2k does Your latest AutoPatcher_2K_June2005_ENU_Full

support? (I?ve got an old disk from Year 2000 somewhere...)

Q2: Do I need to use AutoPatcher2k_Oct04_Full first OR is

AutoPatcher_2K_June2005_ENU_Full sufficient?

Greetings in admiration of Your enormous efforts! - I read all the posts...

satcat

PS. Good luck w. DI6 (Drive Image 2002 v6) for Your future work! I use DI

TOGETHER with PM (Partition Magic) since >6 years. With the 3 latest backups

(max. compressed) in the root of my "DATA" partition I managed to work safely

ever since. I use minimum 4, better 5 partitions:

SWAP (for pagefile.sys, ntldr, boot.ini (BOOT MAGIC))

W2K (for the SYSTEM)

TEMP (for Temp files)

STORAGE (for DATA files like MAIL, DOC, DOWNLOADS & TOOLS)

RECOVER (for compressed DI6 pqi-files)

DS.

satcat:

1. Yes, Win2k will be better (and run smoother) than WinMe.

2. Windows 2000 drivers should work on Windows XP since they share the same kernel. Exceptions are rare.

3. If your Win2k is old it will probably come with no service packs pre-applied. That means you'll have to download SP4 from Microsoft before you run (the latest, June2005) AutoPatcher 2000.

/Raptor

Thank You Raptor!

I recently helped a friend w. his WXPP install using Autopatcher - such a nice install: Partition disk, install WXPP, Autopatcher, AdAware, Spybot,

SpywareBlaster, X-Setup Pro, AV, FireWall, Router and THEN connect updating AV+FW protections!

Simply genious - to be updated and wellprotected BEFORE You enter the www!!!

WHEN will Big Gate recognize You and Your crew??

/satcat

^ Yes, it is possible, You just combine the \modules folders. Be carefull of duplicates though. Since there are now several falours of AutoPatcher, we were thinking of bringing back CD sales and introduce a DVD (most likely miniDVD) with all releases combined :)

^^ive tried to get the 2K and XP release as compatable as possible, however theres currently two problems. apart from that they should be perfectly compatable.

ill see about fixing these problems in future releases:

1) the folder containing updated windows component modules in the 2K release is called 'UpdatedComponents', and in XP is called 'Components'.

You need to drag and drop the contents of one folder and drop them into the other.

that will then overwrite duplicates.

2) The other problem is with the setup file for sun java. again two different names for the same item.

when you combine 2K and XP youll be left with the one module, but two setup files.

you need to use the module editor (C:\Program Files\AutoPatcher\Tools) to open the sunjava amc file (C:\Program Files\Autopatcher\Modules\addons).

look at the installation instructions on the last tab. look at which setup file it uses.

open the modules folder (C:\Program Files\AutoPatcher\Modules\Addons\sunjava.amc_files), and delete the other one.

^^

3) personally im slightly concerned about the uninstall autopatcher option thats being discussed.

with the 2K release you need to run it at least twice to get everything installed.

if a user missed that and removed autopatcher, they wouldnt be fully patched.

also, someone might absent mindedly tick the box, loose autopatcher and have to redownload it all over again.

personnally i think its easy enough to just delete the folder manually.

you could even make a quick batch file to remove the folder & reg keys if you wanted.

adding hibernate/standby options defies the point in having a reboot option.

the whole idea is that you need to reboot your computer for the changes to take effect.

if you used hibernate/standby you wouldnt be doing it, and wouldnt have a fully patched, stable system

586093689[/snapback]

Hmmmm I am glad I read this post. I did not know about 2 reboots.... could you say a bit more on that? Do you mean to reboot once then a 2nd time after the slipstream?

Could you point me to the instructions if it is too lengthy to detail here?

^^ after selecting things to install, which should include IE6SP1, and doing a reboot, some extra updates will be available for selection. you can select these for installation and afterwards do another reboot.

586119400[/snapback]

A. I did not get that option available for selection...

B. I also noticed 3 Issues:

1. I cannot go to MS update site, the execution seems suspended with windows explorer and yet firefox has no problem getting there. I try to copy the address firewire has landed in and paste it in IE, and it blanks out the command line totally.

2. My Ati aiw TV suddenly stopped working and a requester says "ATIMMC.exe has generated errors and will be closed by windows. You will need to restart the program. this happens agin and again ehrn I try playing the TV.

So I decided to try and uninstall the drivers and get the newest ones and install those.

3. when I try to go to control pannel "add/Remove software, the window opens and no listings appear, no matter how long I wait.

So now I cannot get updates from MS nor uninstall any Programs

A. I did not get that option available for selection...

B. I also noticed 3 Issues:

1. I cannot go to MS update site, the execution seems suspended with windows explorer and yet firefox has no problem getting there. I try to copy the address firewire has landed in and paste it in IE, and it blanks out the command line totally.

2. My Ati aiw TV suddenly stopped working and a requester says "ATIMMC.exe has generated errors and will be closed by windows. You will need to restart the program. this happens agin and again ehrn I try playing the TV.

So I decided to try and uninstall the drivers and get the newest ones and install those.

3. when I try to go to control pannel "add/Remove software, the window opens and no listings appear, no matter how long I wait.

So now I cannot get updates from MS nor uninstall any Programs

586119646[/snapback]

I went back and try to reinstall. I noticed that there was a checkmark next to each item to install so I checked them all and now am in mid installing. I did get a requester saying that my Installation software was either in safe mode or placed incorrectly and to contact my supporter.

I will say more when it finnishes installing although it seems stuck now at 18% for quite some time.

Update: I had to abort the stuck installation.

I went back and try to reinstall. I noticed that there was a checkmark next to each item to install so I checked them all and now am in mid installing. I did get a requester saying that my Installation software was either in safe mode or placed incorrectly and to contact my supporter.

I will say more when it finnishes installing although it seems stuck now at 18% for quite some time.

Update: I had to abort the stuck installation.

586119716[/snapback]

2nd Update :)

I realized that the patcher has to be done in 2 stps.

So I did th critical updates first

rebooted

then did the rest

rebooted

ALL IS WORKING FINE NOW :)UPDATE

One requester comes up and says:

Warning: DMA Not Enabled

Personal Video Recorder and TV-on-Demand

Performance will be degraded on this system as DMA for

the hard disk is not enabled.

Please check the System Settings in the Windows Control

Panel for the following Devices:

Maxtor 6Y160P0

So what can I do with this? I checked in Conrol Pannel but could not find what to change.

System Properties - Hardware - Device Manager - IDE ATA/ATAPI Controllers - [select the IDE Channel the drive is on, probably Primary] - Advanced Settings - DMA if available.

That's if you haven't installed Intel PAT, which removes these options from the system properties.

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Google Chrome 149.0.7827.115 (offline installer) by Razvan Serea The web browser is arguably the most important piece of software on your computer. You spend much of your time online inside a browser: when you search, chat, email, shop, bank, read the news, and watch videos online, you often do all this using a browser. Google Chrome is a browser that combines a minimal design with sophisticated technology to make the web faster, safer, and easier. Use one box for everything--type in the address bar and get suggestions for both search and Web pages. Thumbnails of your top sites let you access your favorite pages instantly with lightning speed from any new tab. Desktop shortcuts allow you to launch your favorite Web apps straight from your desktop. Chrome has many useful features built in, including automatic full-page translation and access to thousands of apps, extensions, and themes from the Chrome Web Store. Google Chrome is one of the best solutions for Internet browsing giving you high level of security, speed and great features. Important to know! The offline installer links do not include the automatic update feature. Download web installer: Google Chrome Web 32-bit | Google Chrome 64-bit | Freeware Download: Google Chrome Offline Installer 64-bit | Direct Link | 131.0 MB Download: Google Chrome Offline Installer 32-bit | Direct Link | 119.0 MB Download page: Google Chrome Portable Download: Chrome ARM64 | Direct Link View: Chrome Website | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Oh, it's happening on more than one dialog? This is the dialog that I'm unable to interact with.
    • WSCC - Windows System Control Center 10.0.3.8 by Razvan Serea Windows System Control Center is a free, portable program that allows you to install, update, execute and organize the utilities from various system utility suites. WSCC can install and update the supported utilities automatically. Alternatively, WSCC can use the http protocol to download and run the programs. WSCC is portable, installation is not required. Extract the content of the downloaded zip archive to any directory on your computer. Free for personal use. The setup packages and updates are downloaded directly from their author's website! This edition of WSCC supports the following utility suites: Windows Sysinternals Suite (including support for "Sysinternals Live" service) NirSoft Utilities Mitec and more... WSCC - Windows System Control Center 10.0.3.8 changelog: [NEW] update progress is now visible on the Windows taskbar [FIXED] fixed an issue with the Update dialog [FIXED] minor fixes Download: WSCC (64-bit) | 5.4 MB (Free for personal use) Download: WSCC (32-bit) | 6.3 MB View: WSCC Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • The level of stupidity at Google and Microsoft is beyond belief. All they are doing by killing this is forcing people to jump over to Firefox and ditch them all together, therefore giving Firefox the market boost it needs to finally crush them all in the end.
    • HWMonitor 1.64 by Razvan Serea HWMonitor is a hardware monitoring program that reads PC systems main health sensors : voltages, temperatures, fans speed. The program handles the most common sensor chips, like ITE® IT87 series, most Winbond® ICs, and others. In addition, it can read modern CPUs on-die core thermal sensors, as well has hard drives temperature via S.M.A.R.T, and video card GPU temperature. Special hardware monitors such as abit® uGuru and Gigabyte® ODIN™ power supplies serie are supported too. HWMonitor 1.64 changelog: Intel Arc G3 & G3 Extreme (Panther Lake). Intel Core Ultra 5 250KF Plus (Arrow Lake Refresh). AMD Ryzen 7 7700X3D (Raphael). AMD Ryzen AI Max+ 495, 492, 488 (Gorgon Halo). AMD Ryzen AI Max 490, 485 (Gorgon Halo). AMD Ryzen AI Max PRO 495, 490, 485, 480 (Gorgon Halo). AMD Ryzen 9 9950X3D2 (Granite Ridge). AMD Ryzen 9 PRO 9965X3D, PRO 9945 (Granite Ridge). AMD Ryzen 7 PRO 9755, PRO 9745 (Granite Ridge). AMD Ryzen 5 PRO 9645 (Granite Ridge). AMD Ryzen AI 7/PRO 450G/GE (Gorgon Point 2). AMD Ryzen AI 5/PRO 440G/GE (Gorgon Point 2). AMD Ryzen AI 5/PRO 435G/GE (Gorgon Point 3). Support of HUDIMM and HSODIMM memory modules. New themes. New real-time graphs. Download: HWMonitor 1.64 | 3.4 MB (Freeware) Download: Portable HWMonitor 1.64 | 2.7 MB View: HWMonitor Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      PsYcHoKiLLa
      171
    3. 3
      +Edouard
      163
    4. 4
      Steven P.
      86
    5. 5
      ATLien_0
      77
  • Tell a friend

    Love Neowin? Tell a friend!