Recommended Posts

^^excelent  :)

no chance you could share the full version too is there ?

586096566[/snapback]

if there is need for it, i could :)

let me just download it over BT, then i'll put it into my edonkey incoming directory..

-andy-

Blaze, I?m thinking to upgrade my old 333MHz P2 from WMe to W2k since I have

W2k-drivers for the motherboard but no WXP-drivers but also because W2k is less

heavy on processor and memmory compared to WXP.

Q1: How old version of W2k does Your latest AutoPatcher_2K_June2005_ENU_Full

support? (I?ve got an old disk from Year 2000 somewhere...)

Q2: Do I need to use AutoPatcher2k_Oct04_Full first OR is

AutoPatcher_2K_June2005_ENU_Full sufficient?

Greetings in admiration of Your enormous efforts! - I read all the posts...

satcat

PS. Good luck w. DI6 (Drive Image 2002 v6) for Your future work! I use DI

TOGETHER with PM (Partition Magic) since >6 years. With the 3 latest backups

(max. compressed) in the root of my "DATA" partition I managed to work safely

ever since. I use minimum 4, better 5 partitions:

SWAP (for pagefile.sys, ntldr, boot.ini (BOOT MAGIC))

W2K (for the SYSTEM)

TEMP (for Temp files)

STORAGE (for DATA files like MAIL, DOC, DOWNLOADS & TOOLS)

RECOVER (for compressed DI6 pqi-files)

DS.

satcat:

1. Yes, Win2k will be better (and run smoother) than WinMe.

2. Windows 2000 drivers should work on Windows XP since they share the same kernel. Exceptions are rare.

3. If your Win2k is old it will probably come with no service packs pre-applied. That means you'll have to download SP4 from Microsoft before you run (the latest, June2005) AutoPatcher 2000.

/Raptor

Thank You Raptor!

I recently helped a friend w. his WXPP install using Autopatcher - such a nice install: Partition disk, install WXPP, Autopatcher, AdAware, Spybot,

SpywareBlaster, X-Setup Pro, AV, FireWall, Router and THEN connect updating AV+FW protections!

Simply genious - to be updated and wellprotected BEFORE You enter the www!!!

WHEN will Big Gate recognize You and Your crew??

/satcat

^ Yes, it is possible, You just combine the \modules folders. Be carefull of duplicates though. Since there are now several falours of AutoPatcher, we were thinking of bringing back CD sales and introduce a DVD (most likely miniDVD) with all releases combined :)

^^ive tried to get the 2K and XP release as compatable as possible, however theres currently two problems. apart from that they should be perfectly compatable.

ill see about fixing these problems in future releases:

1) the folder containing updated windows component modules in the 2K release is called 'UpdatedComponents', and in XP is called 'Components'.

You need to drag and drop the contents of one folder and drop them into the other.

that will then overwrite duplicates.

2) The other problem is with the setup file for sun java. again two different names for the same item.

when you combine 2K and XP youll be left with the one module, but two setup files.

you need to use the module editor (C:\Program Files\AutoPatcher\Tools) to open the sunjava amc file (C:\Program Files\Autopatcher\Modules\addons).

look at the installation instructions on the last tab. look at which setup file it uses.

open the modules folder (C:\Program Files\AutoPatcher\Modules\Addons\sunjava.amc_files), and delete the other one.

^^

3) personally im slightly concerned about the uninstall autopatcher option thats being discussed.

with the 2K release you need to run it at least twice to get everything installed.

if a user missed that and removed autopatcher, they wouldnt be fully patched.

also, someone might absent mindedly tick the box, loose autopatcher and have to redownload it all over again.

personnally i think its easy enough to just delete the folder manually.

you could even make a quick batch file to remove the folder & reg keys if you wanted.

adding hibernate/standby options defies the point in having a reboot option.

the whole idea is that you need to reboot your computer for the changes to take effect.

if you used hibernate/standby you wouldnt be doing it, and wouldnt have a fully patched, stable system

586093689[/snapback]

Hmmmm I am glad I read this post. I did not know about 2 reboots.... could you say a bit more on that? Do you mean to reboot once then a 2nd time after the slipstream?

Could you point me to the instructions if it is too lengthy to detail here?

^^ after selecting things to install, which should include IE6SP1, and doing a reboot, some extra updates will be available for selection. you can select these for installation and afterwards do another reboot.

586119400[/snapback]

A. I did not get that option available for selection...

B. I also noticed 3 Issues:

1. I cannot go to MS update site, the execution seems suspended with windows explorer and yet firefox has no problem getting there. I try to copy the address firewire has landed in and paste it in IE, and it blanks out the command line totally.

2. My Ati aiw TV suddenly stopped working and a requester says "ATIMMC.exe has generated errors and will be closed by windows. You will need to restart the program. this happens agin and again ehrn I try playing the TV.

So I decided to try and uninstall the drivers and get the newest ones and install those.

3. when I try to go to control pannel "add/Remove software, the window opens and no listings appear, no matter how long I wait.

So now I cannot get updates from MS nor uninstall any Programs

A. I did not get that option available for selection...

B. I also noticed 3 Issues:

1. I cannot go to MS update site, the execution seems suspended with windows explorer and yet firefox has no problem getting there. I try to copy the address firewire has landed in and paste it in IE, and it blanks out the command line totally.

2. My Ati aiw TV suddenly stopped working and a requester says "ATIMMC.exe has generated errors and will be closed by windows. You will need to restart the program. this happens agin and again ehrn I try playing the TV.

So I decided to try and uninstall the drivers and get the newest ones and install those.

3. when I try to go to control pannel "add/Remove software, the window opens and no listings appear, no matter how long I wait.

So now I cannot get updates from MS nor uninstall any Programs

586119646[/snapback]

I went back and try to reinstall. I noticed that there was a checkmark next to each item to install so I checked them all and now am in mid installing. I did get a requester saying that my Installation software was either in safe mode or placed incorrectly and to contact my supporter.

I will say more when it finnishes installing although it seems stuck now at 18% for quite some time.

Update: I had to abort the stuck installation.

I went back and try to reinstall. I noticed that there was a checkmark next to each item to install so I checked them all and now am in mid installing. I did get a requester saying that my Installation software was either in safe mode or placed incorrectly and to contact my supporter.

I will say more when it finnishes installing although it seems stuck now at 18% for quite some time.

Update: I had to abort the stuck installation.

586119716[/snapback]

2nd Update :)

I realized that the patcher has to be done in 2 stps.

So I did th critical updates first

rebooted

then did the rest

rebooted

ALL IS WORKING FINE NOW :)UPDATE

One requester comes up and says:

Warning: DMA Not Enabled

Personal Video Recorder and TV-on-Demand

Performance will be degraded on this system as DMA for

the hard disk is not enabled.

Please check the System Settings in the Windows Control

Panel for the following Devices:

Maxtor 6Y160P0

So what can I do with this? I checked in Conrol Pannel but could not find what to change.

System Properties - Hardware - Device Manager - IDE ATA/ATAPI Controllers - [select the IDE Channel the drive is on, probably Primary] - Advanced Settings - DMA if available.

That's if you haven't installed Intel PAT, which removes these options from the system properties.

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Anthropic pulls Fable 5 and Mythos 5 after US export control order by Pradeep Viswanathan In April this year, Anthropic launched the Claude Mythos Preview frontier model with state-of-the-art cyber and coding capabilities for a select set of companies around the world. After preparing appropriate guardrails, early this week, Anthropic launched Claude Fable 5 and Mythos 5, its most capable AI models. Claude Fable 5 is for general users and comes with strict safeguards, while Mythos 5 is designed with fewer safeguards for cybersecurity and biology use cases. Today, Anthropic abruptly suspended access to its Fable 5 and Mythos 5 AI models for all customers after receiving an export control directive from the US government. The company received the directive from the government today at 5:21 p.m. ET, and the received letter did not provide any details regarding the national security concern. Anthropic understands that the government became aware of a method to bypass, or “jailbreak,” Fable 5, which might be the reason behind the directive. The order was issued under national security authorities and requires the company to suspend all access to Fable 5 and Mythos 5 by any foreign national, whether they are inside or outside the United States. The restriction also applies to foreign national employees working at Anthropic. As a result, the company has disabled both models for all customers to ensure compliance. Access to previous Anthropic models like Opus and Sonnet is not affected by this government order. The company highlighted that it had developed strong safeguards to reduce the possibility that Fable is misused for tasks related to cybersecurity. In fact, many developers are complaining that the safeguards are going overboard. Additionally, the company worked with the US government, the UK AISI, multiple private third-party organizations, and internal teams to red-team Fable’s safeguards for thousands of hours. Finally, Anthropic noted that no testers have yet been able to find a universal jailbreak on Fable 5. As expected, Anthropic disagrees that a narrow potential jailbreak should lead to the recall of a commercial model used by hundreds of millions of people. It warned that applying this standard across the AI industry could effectively halt new frontier model deployments. Anthropic concluded by mentioning that it is working to restore access to Fable 5 and Mythos 5 as soon as possible and plans to share more details within the next 24 hours.
    • Brave Browser 1.91.172 is out.
    • Any Video Converter Free 9.2.3 by Razvan Serea Any Video Converter is an All-in-One video converting tool with an easy-to-use graphical interface, fast converting speed and excellent video quality. Any Video Converter supports all popular video formats and converts your videos to different video formats including MP4, MOV, MKV, M2TS, M4V, MPEG, AVI, WMV, ASF, OGV, WEBM, and more. It supports converting videos to customized percent (50%, 100%, 200%, and more) or resolution (480p, 720p, 1080p, 4K, and more); It supports encoding videos into x264, x265, h263p, xvid, mpeg, wmv, and more. Any Video Converter Free key features: Compatible with Windows 11/10/8.1/8/7 (32-64bit) User interface are available in 14 languages Convert all kinds of video formats including high-definition videos Extract audio from any videos and save as MP3/WMA for your mp3 player Take snapshot from any videos and build your own picture collection Support high-definition for both input and output Batch add videos from hard drive and batch convert Customize output parameters completely as you like Manage your output videos files by group or output profile Merge several video files into a single and long one Clip a video into segments Free Audio Filter: Adjust audio volume and add audio effects Crop frame size to remove black bars and retain what you want only Adjust the brightness, contrast, saturation Rotate or flip or add noise/sharpen effects Produce output video with subtitles of your own dialogue and much, much more... Any Video Converter Free 9.2.3 changelog: Fixed video download engine auto-update failures. Added custom speed control support in the speed change tool. Added support for downloading YouTube AI-generated subtitles. Added support for preserving original audio stream in the format convert tool (e.g., Dolby Atmos, DTS:X). Fixed other bugs and improved overall performance. Download: Any Video Converter Free 9.2.3 | 7.6 MB (Freeware) View: Any Video Converter Free Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Not sure what country you’re in but in many countries you can absolutely jail the sellers behind businesses… in fact I’d say in most countries you can do that
    • I guess we are done since you refuse to read my comment you replied to or my other comment in another thread you were also a part of here.
  • Recent Achievements

    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
    • Rookie
      Rimplesnort went up a rank
      Rookie
    • One Year In
      Markus94287 earned a badge
      One Year In
    • One Month Later
      Markus94287 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      176
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      ATLien_0
      92
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!