Recommended Posts

^^excelent  :)

no chance you could share the full version too is there ?

586096566[/snapback]

if there is need for it, i could :)

let me just download it over BT, then i'll put it into my edonkey incoming directory..

-andy-

Blaze, I?m thinking to upgrade my old 333MHz P2 from WMe to W2k since I have

W2k-drivers for the motherboard but no WXP-drivers but also because W2k is less

heavy on processor and memmory compared to WXP.

Q1: How old version of W2k does Your latest AutoPatcher_2K_June2005_ENU_Full

support? (I?ve got an old disk from Year 2000 somewhere...)

Q2: Do I need to use AutoPatcher2k_Oct04_Full first OR is

AutoPatcher_2K_June2005_ENU_Full sufficient?

Greetings in admiration of Your enormous efforts! - I read all the posts...

satcat

PS. Good luck w. DI6 (Drive Image 2002 v6) for Your future work! I use DI

TOGETHER with PM (Partition Magic) since >6 years. With the 3 latest backups

(max. compressed) in the root of my "DATA" partition I managed to work safely

ever since. I use minimum 4, better 5 partitions:

SWAP (for pagefile.sys, ntldr, boot.ini (BOOT MAGIC))

W2K (for the SYSTEM)

TEMP (for Temp files)

STORAGE (for DATA files like MAIL, DOC, DOWNLOADS & TOOLS)

RECOVER (for compressed DI6 pqi-files)

DS.

satcat:

1. Yes, Win2k will be better (and run smoother) than WinMe.

2. Windows 2000 drivers should work on Windows XP since they share the same kernel. Exceptions are rare.

3. If your Win2k is old it will probably come with no service packs pre-applied. That means you'll have to download SP4 from Microsoft before you run (the latest, June2005) AutoPatcher 2000.

/Raptor

Thank You Raptor!

I recently helped a friend w. his WXPP install using Autopatcher - such a nice install: Partition disk, install WXPP, Autopatcher, AdAware, Spybot,

SpywareBlaster, X-Setup Pro, AV, FireWall, Router and THEN connect updating AV+FW protections!

Simply genious - to be updated and wellprotected BEFORE You enter the www!!!

WHEN will Big Gate recognize You and Your crew??

/satcat

^ Yes, it is possible, You just combine the \modules folders. Be carefull of duplicates though. Since there are now several falours of AutoPatcher, we were thinking of bringing back CD sales and introduce a DVD (most likely miniDVD) with all releases combined :)

^^ive tried to get the 2K and XP release as compatable as possible, however theres currently two problems. apart from that they should be perfectly compatable.

ill see about fixing these problems in future releases:

1) the folder containing updated windows component modules in the 2K release is called 'UpdatedComponents', and in XP is called 'Components'.

You need to drag and drop the contents of one folder and drop them into the other.

that will then overwrite duplicates.

2) The other problem is with the setup file for sun java. again two different names for the same item.

when you combine 2K and XP youll be left with the one module, but two setup files.

you need to use the module editor (C:\Program Files\AutoPatcher\Tools) to open the sunjava amc file (C:\Program Files\Autopatcher\Modules\addons).

look at the installation instructions on the last tab. look at which setup file it uses.

open the modules folder (C:\Program Files\AutoPatcher\Modules\Addons\sunjava.amc_files), and delete the other one.

^^

3) personally im slightly concerned about the uninstall autopatcher option thats being discussed.

with the 2K release you need to run it at least twice to get everything installed.

if a user missed that and removed autopatcher, they wouldnt be fully patched.

also, someone might absent mindedly tick the box, loose autopatcher and have to redownload it all over again.

personnally i think its easy enough to just delete the folder manually.

you could even make a quick batch file to remove the folder & reg keys if you wanted.

adding hibernate/standby options defies the point in having a reboot option.

the whole idea is that you need to reboot your computer for the changes to take effect.

if you used hibernate/standby you wouldnt be doing it, and wouldnt have a fully patched, stable system

586093689[/snapback]

Hmmmm I am glad I read this post. I did not know about 2 reboots.... could you say a bit more on that? Do you mean to reboot once then a 2nd time after the slipstream?

Could you point me to the instructions if it is too lengthy to detail here?

^^ after selecting things to install, which should include IE6SP1, and doing a reboot, some extra updates will be available for selection. you can select these for installation and afterwards do another reboot.

586119400[/snapback]

A. I did not get that option available for selection...

B. I also noticed 3 Issues:

1. I cannot go to MS update site, the execution seems suspended with windows explorer and yet firefox has no problem getting there. I try to copy the address firewire has landed in and paste it in IE, and it blanks out the command line totally.

2. My Ati aiw TV suddenly stopped working and a requester says "ATIMMC.exe has generated errors and will be closed by windows. You will need to restart the program. this happens agin and again ehrn I try playing the TV.

So I decided to try and uninstall the drivers and get the newest ones and install those.

3. when I try to go to control pannel "add/Remove software, the window opens and no listings appear, no matter how long I wait.

So now I cannot get updates from MS nor uninstall any Programs

A. I did not get that option available for selection...

B. I also noticed 3 Issues:

1. I cannot go to MS update site, the execution seems suspended with windows explorer and yet firefox has no problem getting there. I try to copy the address firewire has landed in and paste it in IE, and it blanks out the command line totally.

2. My Ati aiw TV suddenly stopped working and a requester says "ATIMMC.exe has generated errors and will be closed by windows. You will need to restart the program. this happens agin and again ehrn I try playing the TV.

So I decided to try and uninstall the drivers and get the newest ones and install those.

3. when I try to go to control pannel "add/Remove software, the window opens and no listings appear, no matter how long I wait.

So now I cannot get updates from MS nor uninstall any Programs

586119646[/snapback]

I went back and try to reinstall. I noticed that there was a checkmark next to each item to install so I checked them all and now am in mid installing. I did get a requester saying that my Installation software was either in safe mode or placed incorrectly and to contact my supporter.

I will say more when it finnishes installing although it seems stuck now at 18% for quite some time.

Update: I had to abort the stuck installation.

I went back and try to reinstall. I noticed that there was a checkmark next to each item to install so I checked them all and now am in mid installing. I did get a requester saying that my Installation software was either in safe mode or placed incorrectly and to contact my supporter.

I will say more when it finnishes installing although it seems stuck now at 18% for quite some time.

Update: I had to abort the stuck installation.

586119716[/snapback]

2nd Update :)

I realized that the patcher has to be done in 2 stps.

So I did th critical updates first

rebooted

then did the rest

rebooted

ALL IS WORKING FINE NOW :)UPDATE

One requester comes up and says:

Warning: DMA Not Enabled

Personal Video Recorder and TV-on-Demand

Performance will be degraded on this system as DMA for

the hard disk is not enabled.

Please check the System Settings in the Windows Control

Panel for the following Devices:

Maxtor 6Y160P0

So what can I do with this? I checked in Conrol Pannel but could not find what to change.

System Properties - Hardware - Device Manager - IDE ATA/ATAPI Controllers - [select the IDE Channel the drive is on, probably Primary] - Advanced Settings - DMA if available.

That's if you haven't installed Intel PAT, which removes these options from the system properties.

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Because of the EU (a good thing) newer android devices been getting 5 years worth of security patches. Except some Motorola which found the loop hole, and offer ZERO updates. In addition, Google for years have been making where it can patch some stuff by updating the core Google Play Store itself.  As echoed earlier,  you take the security risk in to your own hand beyond supported.
    • Win11Debloat 06.11.2026 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 06.11.2026 fixes: Fix lock screen spotlight option being disabled when disabling the start recommended section by @Raphire in #619 Fix log message formatting by @Raphire Note The -RemoveCommApps and -RemoveW11Outlook command-line parameters for uninstalling a few specific apps have been removed with this release. If you previously relied on these parameters, please see this wiki page for alternative methods of removing these apps. Download: Win11Debloat 06.11.2026 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yes for me, I installed 'old calculator' (Windows 7 calculator) in its place since it is more useful to me. I think paint is the only one I left installed
  • Recent Achievements

    • Rookie
      restore went up a rank
      Rookie
    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      501
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      ATLien_0
      83
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!