Recommended Posts

^^excelent  :)

no chance you could share the full version too is there ?

586096566[/snapback]

if there is need for it, i could :)

let me just download it over BT, then i'll put it into my edonkey incoming directory..

-andy-

Blaze, I?m thinking to upgrade my old 333MHz P2 from WMe to W2k since I have

W2k-drivers for the motherboard but no WXP-drivers but also because W2k is less

heavy on processor and memmory compared to WXP.

Q1: How old version of W2k does Your latest AutoPatcher_2K_June2005_ENU_Full

support? (I?ve got an old disk from Year 2000 somewhere...)

Q2: Do I need to use AutoPatcher2k_Oct04_Full first OR is

AutoPatcher_2K_June2005_ENU_Full sufficient?

Greetings in admiration of Your enormous efforts! - I read all the posts...

satcat

PS. Good luck w. DI6 (Drive Image 2002 v6) for Your future work! I use DI

TOGETHER with PM (Partition Magic) since >6 years. With the 3 latest backups

(max. compressed) in the root of my "DATA" partition I managed to work safely

ever since. I use minimum 4, better 5 partitions:

SWAP (for pagefile.sys, ntldr, boot.ini (BOOT MAGIC))

W2K (for the SYSTEM)

TEMP (for Temp files)

STORAGE (for DATA files like MAIL, DOC, DOWNLOADS & TOOLS)

RECOVER (for compressed DI6 pqi-files)

DS.

satcat:

1. Yes, Win2k will be better (and run smoother) than WinMe.

2. Windows 2000 drivers should work on Windows XP since they share the same kernel. Exceptions are rare.

3. If your Win2k is old it will probably come with no service packs pre-applied. That means you'll have to download SP4 from Microsoft before you run (the latest, June2005) AutoPatcher 2000.

/Raptor

Thank You Raptor!

I recently helped a friend w. his WXPP install using Autopatcher - such a nice install: Partition disk, install WXPP, Autopatcher, AdAware, Spybot,

SpywareBlaster, X-Setup Pro, AV, FireWall, Router and THEN connect updating AV+FW protections!

Simply genious - to be updated and wellprotected BEFORE You enter the www!!!

WHEN will Big Gate recognize You and Your crew??

/satcat

^ Yes, it is possible, You just combine the \modules folders. Be carefull of duplicates though. Since there are now several falours of AutoPatcher, we were thinking of bringing back CD sales and introduce a DVD (most likely miniDVD) with all releases combined :)

^^ive tried to get the 2K and XP release as compatable as possible, however theres currently two problems. apart from that they should be perfectly compatable.

ill see about fixing these problems in future releases:

1) the folder containing updated windows component modules in the 2K release is called 'UpdatedComponents', and in XP is called 'Components'.

You need to drag and drop the contents of one folder and drop them into the other.

that will then overwrite duplicates.

2) The other problem is with the setup file for sun java. again two different names for the same item.

when you combine 2K and XP youll be left with the one module, but two setup files.

you need to use the module editor (C:\Program Files\AutoPatcher\Tools) to open the sunjava amc file (C:\Program Files\Autopatcher\Modules\addons).

look at the installation instructions on the last tab. look at which setup file it uses.

open the modules folder (C:\Program Files\AutoPatcher\Modules\Addons\sunjava.amc_files), and delete the other one.

^^

3) personally im slightly concerned about the uninstall autopatcher option thats being discussed.

with the 2K release you need to run it at least twice to get everything installed.

if a user missed that and removed autopatcher, they wouldnt be fully patched.

also, someone might absent mindedly tick the box, loose autopatcher and have to redownload it all over again.

personnally i think its easy enough to just delete the folder manually.

you could even make a quick batch file to remove the folder & reg keys if you wanted.

adding hibernate/standby options defies the point in having a reboot option.

the whole idea is that you need to reboot your computer for the changes to take effect.

if you used hibernate/standby you wouldnt be doing it, and wouldnt have a fully patched, stable system

586093689[/snapback]

Hmmmm I am glad I read this post. I did not know about 2 reboots.... could you say a bit more on that? Do you mean to reboot once then a 2nd time after the slipstream?

Could you point me to the instructions if it is too lengthy to detail here?

^^ after selecting things to install, which should include IE6SP1, and doing a reboot, some extra updates will be available for selection. you can select these for installation and afterwards do another reboot.

586119400[/snapback]

A. I did not get that option available for selection...

B. I also noticed 3 Issues:

1. I cannot go to MS update site, the execution seems suspended with windows explorer and yet firefox has no problem getting there. I try to copy the address firewire has landed in and paste it in IE, and it blanks out the command line totally.

2. My Ati aiw TV suddenly stopped working and a requester says "ATIMMC.exe has generated errors and will be closed by windows. You will need to restart the program. this happens agin and again ehrn I try playing the TV.

So I decided to try and uninstall the drivers and get the newest ones and install those.

3. when I try to go to control pannel "add/Remove software, the window opens and no listings appear, no matter how long I wait.

So now I cannot get updates from MS nor uninstall any Programs

A. I did not get that option available for selection...

B. I also noticed 3 Issues:

1. I cannot go to MS update site, the execution seems suspended with windows explorer and yet firefox has no problem getting there. I try to copy the address firewire has landed in and paste it in IE, and it blanks out the command line totally.

2. My Ati aiw TV suddenly stopped working and a requester says "ATIMMC.exe has generated errors and will be closed by windows. You will need to restart the program. this happens agin and again ehrn I try playing the TV.

So I decided to try and uninstall the drivers and get the newest ones and install those.

3. when I try to go to control pannel "add/Remove software, the window opens and no listings appear, no matter how long I wait.

So now I cannot get updates from MS nor uninstall any Programs

586119646[/snapback]

I went back and try to reinstall. I noticed that there was a checkmark next to each item to install so I checked them all and now am in mid installing. I did get a requester saying that my Installation software was either in safe mode or placed incorrectly and to contact my supporter.

I will say more when it finnishes installing although it seems stuck now at 18% for quite some time.

Update: I had to abort the stuck installation.

I went back and try to reinstall. I noticed that there was a checkmark next to each item to install so I checked them all and now am in mid installing. I did get a requester saying that my Installation software was either in safe mode or placed incorrectly and to contact my supporter.

I will say more when it finnishes installing although it seems stuck now at 18% for quite some time.

Update: I had to abort the stuck installation.

586119716[/snapback]

2nd Update :)

I realized that the patcher has to be done in 2 stps.

So I did th critical updates first

rebooted

then did the rest

rebooted

ALL IS WORKING FINE NOW :)UPDATE

One requester comes up and says:

Warning: DMA Not Enabled

Personal Video Recorder and TV-on-Demand

Performance will be degraded on this system as DMA for

the hard disk is not enabled.

Please check the System Settings in the Windows Control

Panel for the following Devices:

Maxtor 6Y160P0

So what can I do with this? I checked in Conrol Pannel but could not find what to change.

System Properties - Hardware - Device Manager - IDE ATA/ATAPI Controllers - [select the IDE Channel the drive is on, probably Primary] - Advanced Settings - DMA if available.

That's if you haven't installed Intel PAT, which removes these options from the system properties.

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Not such a great deal, Ultimate, which gives you full 5080 features is $181.99 CAD per month, that's $2183.88 per year, I can buy the 5080 for $1809.99 CAD, then it goes up to $279.99 per month after the first billing cycle. Typical cloud rental, costs more than buying the hardware.
    • Wow, spoken like a true blind hater, you don't even provide arguments. Please, go check my comment above to @seacaptain and you'll find out why what you say doesn't make sense in this context...
    • Get used to this, with AI tooling now uncovering new vulns and getting them exploitable far faster than has ever been possible before software is going to need to be updated far more frequently. Back in the day it may take reseachers weeks or months to do what AI can now do in hours. Once its a threat is discovered it's weaponsized far more quickly, meaning you simply can't be waiting 2, 3, 4 weeks to deploy a patch, it needs to be patched immediately. Going to be interesting handling this in the enterprise space where traditionally patching has been steady, but very staged (and rightly so up until now), that is going to have to change.
    • You don't need to "close all browser sessions constantly" or wait for updates to install. The updates download in the background while you use the browser, without interrupting you, they install automatically the next time you launch the app. And they install very fast (depending on your storage speeds, of course), you have to wait at most 2-3 extra seconds, if any. Seems like you haven't used Edge in a loooooooong time...
    • Segra 1.6.0 by Razvan Serea Segra is a free, open-source OBS-powered game recorder offering fast gameplay capture, instant clips, AI highlights, deep game integration, and seamless uploads—perfect for gamers, streamers, and content creators. Lightweight, fast, zero bloat. Segra key features: Automatic Game Recording: Begin capturing gameplay the moment your game launches, with zero manual setup. Instant Clipping: Save important moments instantly using a customizable hotkey—perfect for highlights, montages, or quick shares. Segra AI Highlights: Let Segra automatically detect kills, assists, deaths, and key events to generate polished highlight reels without manual editing. Gameplay Uploads: Upload recordings and clips directly to Segra.tv for fast sharing and cloud access. Deep Game Integration: Enjoy advanced game-data tracking across hundreds of supported titles, enabling smart highlight generation and stat-informed clipping. High-Performance Capture: Record up to 4K at 144 FPS using OBS-powered technology with minimal performance impact, supporting NVENC, AMD VCE, and custom quality controls. Segra Editor: Edit recordings easily with timeline controls, segment management, and event-based navigation to build the perfect clip. Customization Options: Adjust hotkeys, output formats, storage paths, codecs, capture quality, and performance settings for a tailored recording experience. Segra 1.6.0 changelog: Recording: Added HDR support. Grand Theft Auto: Added game integration for deaths (FiveM and RAGE MP supported). Highlights: Added customizable padding for highlights. Replay Buffer: Added a shockwave visual effect when a replay buffer clip is saved. Audio: Increased the maximum sound effects volume from 100% to 200%. Hotkeys: Fixed hotkeys not triggering while unrelated keys were held. Installer: Added code signing to verify publisher identity, branded the installer, and reduced OS security warnings. OBS: Updated the supported OBS version to 32.1.2. Download: Segra 1.6.0 | 74.4 MB (Open Source) View: Segra Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      175
    3. 3
      +Edouard
      163
    4. 4
      Steven P.
      86
    5. 5
      ATLien_0
      80
  • Tell a friend

    Love Neowin? Tell a friend!