my G5 massacre

By lime
in Hardware Hangout

 Share

Recommended Posts

Proficient

lime

Posted
Posted

I finally got some time from school and my internship and my wedding to get started and complete my G5 case mod over the past few weeks. I got my case on ebay for about $100 back in march and couldn't wait to get home from school to cut into it. All i wanted to do with this mod was put my Athlon64 machine inside and make it look as plain G5 as possible with the exception of the back of the case. I have done two other mods where i used a lot of plexiglass and mirrored plexiglass so i wanted to stray away from that and just work with aluminum on this case. After this post, if you have any questions just feel free to ask.

Here is when i started to cut out the back of the G5 to accomodate my old motherboard tray from a Kingwin case I modded a while ago.

1.jpg

As i continued my process and deciding where i wanted things to go inside the case i quickly discovered i would need to cut out the whole back and put my motherboard tray at the bottom while leaving room for my power supply at the top. So here's a picture of the back completely cut out...

2.jpg

I know most people here like to see some carnage...this is only minimal and maybe more serious to mac fans everywhere.....the massacre is almost over at this point....

3.jpg

I was stuck for a while on how to build the back of the case in to accomodate the mobo tray i planned to use. My stepdad, who just happens to be a professional window installer, was cruising through the garage at this point and looking over my case. I had some sheets of aluminum i purchased and he said why not just use his brake that he uses to bend and cut aluminum coil while installing windows. I had done this many times the summer before so it was a very easy fix to my problem. So here is the newly constructed back of the case before i cut the hole for the power supply.

4.jpg

This next picture is after I cut the hole in the back for the power supply and i constructed a shelf for the combo drive and power supply. Again for the shelf i used an aluminum sheet and bent it on the brake, attaching it with existing screw holes on the case, after i ripped out the old standoffs of course. the shelf has a 120mm hole for the fan in my power supply as well.

5.jpg

So skipping pictures of a lot of intermediate type things this is the final picture inside. There are lots of wires everywhere which i intend to clean up somewhat. I'm not as worried about it as i was in my kingwin case with a window and mirrored plexi so i'll probably leave it for a while like this.

6.jpg

This is the area at the front on the bottom of the case. I made small mounts for the 120mm coolermaster silent fan and the hard drive, mounting it 3/4" off the floor of the case for air travel all around it.

7.jpg

This is a shot of the top at the front with the combo drive mounted so it pushes through the original apple slot. i had to remove the faceplate to get it to fit. Also mounted here is my floppy drive / memory card reader using small aluminum angle.

8.jpg

Here is the most difficult part of the project in my opinion. It took me a while to come up with an idea to get the power supply all the way to the back because of the curve of the G5 case at the corners. I finally ripped open my power supply to replace it's 120mm fan with the same silent one i used at the front of the case. While inside the power supply i thought the wires connecting the backplate seemed kinda long so i decided to just remove the backplate. I made a small piece of aluminum to help keep the power supply together where the backplate should have been and i just pulled the backplate through my back piece of aluminum on the case and bolted it in. It works amazingly well and i'm satisfied with it.

9.jpg

So here are just a couple outside shots of the finished product. the power switch on the front works thanks to a slick wiring trick i found at this link

I have yet to clean the case fully but it still looks pretty good in normal light, the flash brings out lots of bad things...

10.jpg

11.jpg

So like i said any questions just post and i will answer them shortly....

Link to comment
https://www.neowin.net/forum/topic/334217-my-g5-massacre/
Share on other sites
Proficient

lime

Posted
  • Author
Posted

thanks for all the comments...

the power switch does work. i used another G5 modder's idea of how to use the apple cable that's attached to the front connections and put my wires into the right pins on that switch for it to work. as far as a reset....i have one put into the back of the computer at the bottom just incase i need a little push button reset.....

i would love to buy an ACD but i just bought this LCD a while ago so i wont for a little while anyways.....and by a little while i mean my new wife of one week probably wont go for a $1200 monitor quite yet......

and i've had my xp pro exactly like a mac for a long time so it will still be easy to trick people back at college....

Link to comment
https://www.neowin.net/forum/topic/334217-my-g5-massacre/#findComment-586088953
Share on other sites
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Salesforce to acquire Fin, formerly Intercom, for over $3 billion

      By David Uzondu · Posted

      Salesforce to acquire Fin, formerly Intercom, for over $3 billion by David Uzondu Image via DepositPhotos.com Salesforce today announced that it has reached an agreement with customer support software company Fin to buy the company for around $3.6 billion. Salesforce expects the transaction to close in the fourth quarter of its fiscal year 2027, and the acquisition will not change its financial guidance previously announced on May 27. Marc Benioff, CEO of Salesforce, in its press release, claimed that acquiring the startup gives Salesforce an immediate AI agent that resolves support tickets across email, WhatsApp, SMS, and Slack: You might know Fin by its former name, Intercom. If you have ever been on a website or inside a mobile app and noticed a little chat bubble widget floating in the bottom right corner of your screen, often featuring a friendly face and a message like, "Hi! How can we help you today?" you were almost certainly looking at Intercom. Intercom became Fin just last month, transforming itself into an "AI-first" platform that handles customer issues with little need for humans to intervene. The new name originates from the company's highly successful AI customer service agent, which it launched way back in 2023. This digital assistant supposedly resolves about 76% of customer service volume end-to-end on its own, so the business rebranded to match its primary software tool. Fin's new owners, Salesforce, went on an acquisition spree over the last few years, and some of them you might recognize, like its 2020 $27.7 Billion acquisition of Slack. The last few months saw the enterprise giant buy several startups, including m3ter, Momentum, Cimulate, and Contentful. Salesforce said that when the Fin deal pulls through, customers will "deploy AI agents across" various service operations, which will complement Agentforce, the platform that enables businesses to deploy customizable autonomous digital workers.
    • Politically funny images of the World

      By +primortal · Posted

    • The official Funny Pictures thread

      By +primortal · Posted

    • Politically funny images of the World

      By +primortal · Posted

    • Microsoft now allows you to tweak Visual Studio to new extremes

      By Usama Jawad96 · Posted

      Microsoft now allows you to tweak Visual Studio to new extremes by Usama Jawad Visual Studio 2026 recently netted a powerful feature that finally allows developers to review Git Pull Requests (PRs) directly in the integrated development environment (IDE), without needing to switch to the browser. However, that's not all that Microsoft introduced in the latest version, as it also offered a useful way to customize the IDE to their heart's content. Although Visual Studio 2026 already provides lots of stock themes based on Fluent Design principles, Microsoft understands that people still want to customize them further according to their preferences. The IDE now offers a new configuration page for themes under Tools > Options > Environment > Visual Experience > Theme colors. This allows you to set hex color codes for accent colors, hover states, and more, and apply them without requiring a restart. The Redmond tech giant further says that: Microsoft is also offering granular color tokens that allow you to customize various UX elements like the tab header without impacting the rest of the shell chrome. Your themes are also stored in JSON format in %LOCALAPPDATA%\Microsoft\VisualStudio\18.0_xxxxxxxx\ColorThemes, which basically enables you to share it with others or override existing themes. This is a major improvement in terms of the user experience powering these customization capabilities. This is because extensions were required to replace the theme, and it was not very easy to make minor adjustments. This theme configuration UX solves this problem and is available in Visual Studio 2026 version 18.7, available here.

  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      201
    3. 3
      PsYcHoKiLLa
      127
    4. 4
      Steven P.
      82
    5. 5
      ATLien_0
      76
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!