Recommended Posts

^^ Made my problem fit into the topic... How can i change it so that before the logon screen appears there is no blue flash? I changed the wallpaper on the logon background but that didn't fix it.

While im here I may as well Hijack my own thread and also ask if anyone here can help me out with a coding issue with my current logon screen project...

Thanks for replying :)

I had a login screen before that I didn't notice it at all (it featured water and stuff so it looked natural) but this new one doesn't look so smooth with it.

Perhaps the new version of logonstudio that is said to be coming out soon will fix that...

  • 3 months later...

Darkpuma,

good try, but no luck!

I've also tried:

bitmap_*.bmp

tweakUI

HKEY_USERS\.DEFAULT\Control Panel\Colors\Background

and still get the same flashing blue when invoking Switch-Users. This is fine for blue logon screens. But, for instance if you simply install the gray logon at:

http://www.wincustomize.com/download.aspx?...=26&SkinID=1718

Switching users, with Start/Logoff, flashes blue for a second before going to a grey background. This is very klunky.

I've also tried montoring events with two utilities from sysinternals:

FileMon.exe filtering LononuiX.exe and Winlogon.exe

Regmon.exe

But turned up with no leads. Any other tools that I can try, aside from SoftIce?

Warren

  • 1 year later...
  • 2 months later...

I haven't been busy with skinning a while, but I remember that this was a typical windows feature that can't be solved.

It's the stage before all graphics are displayed, so a skin cannot change this.

Some years ago I tested all tweaks, reghacks and startup file hack without any luck. Back then there was a tread on this board and

on Virtual Plastic about the blue flash, but no solution.

Now I just live with it... but if there's any hack, I'd like to know !!

I haven't been busy with skinning a while, but I remember that this was a typical windows feature that can't be solved.

It's the stage before all graphics are displayed, so a skin cannot change this.

Some years ago I tested all tweaks, reghacks and startup file hack without any luck. Back then there was a tread on this board and

on Virtual Plastic about the blue flash, but no solution.

Now I just live with it... but if there's any hack, I'd like to know !!

  • 3 weeks later...
  • 8 months later...

grr this is annoying me so much!

Why spend all this time getting a really nice dark logon screen and dark themes to have them ruined by the blue flash!!

:cry:

On my computer I get an hourglass and the blue flash just after I press switch user so I guess the color is loaded before logonui.exe. Does anyone know what XP does/runs just before it starts logonui.exe?

Has anyone not got this blue flash?

  • 3 months later...
  • 1 month later...
I started this topic aaages ago, and i think i did actually manage to get rid of it :p havn't used xp in a while, but next time i boot my laptop ill let you know if i have fixed it!

that blue color is in logonui.exe, somewhere. i tried to find it but no luck yet. :( (with disassembling logonui.exe, etc) if you use classic logontype that annoying blue color doesnt show up at all. so i think it is in logonui.exe.

tell me if you know something. :)

  • 2 weeks later...

Wow, there's a really easy solution to this that I've been using for years, can't believe this is considered one of those "great unsolvable mysteries"...

Here are step by step instructions:

1. Right click your desktop, select "Properties", and go to the "Desktop" tab.

2. On the "color" drop down, select black (or whatever color you want the flash to be).

3. Download TweakUI from here and run it.

4. In TweakUI, expand "Logon" and select the "Settings" pane.

5. Check the "Colors" box.

6. Click "Copy Now", then click "Apply".

Next time you reboot, the flash will be replaced by whatever color you chose (you'll probably just want to set it to black).

  • 1 month later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Louis Rossmann suing Samsung over "990 Pro SSD warranty scam" by Sayan Sen Back in 2023, if you recall, Neowin reviewer Robbie Khan had a dispute with Samsung over his 990 Pro SSD, which was rapidly losing its health. After significant back and forth, the tech giant had finally released firmware to "stop" the issue. Interestingly, its previous flagship at the time, the 980 Pro was also facing problems leading to two consecutive sets of firmware fixes. Three years later, it looks like a similar conflict has now broken out between tech repair entrepreneur YouTuber Louis Rossmann and Samsung, as it has escalated into a threatened lawsuit after the company allegedly refused to appropriately replace a failing 990 Pro SSD that remained under warranty. According to Rossmann, a 4TB Samsung 990 Pro NVMe SSD purchased for approximately $330 less than two years ago, began experiencing major hiccups and issues, even though he claims it had been operated under ideal cooling conditions. It was installed in a RAID 1 array and cooled by a heatsink and dual high-speed fans. However the drive reportedly started dropping out of the array, exhibiting controller-level failures that eventually became not useable in any meaningful way. Rossmann said Samsung’s support process was marked by delays and confusion from the very start. After initially contacting the wrong regional support channel, he was redirected to Samsung’s memory support division where he submitted detailed diagnostics, logs, and proof of purchase. Rossmann runs a repair company and owns an ACE Lab PC-3000 machine, which is a professional-grade data recovery equipment. As such, he had been confident in his diagnostics. Samsung even seemingly acknowledged that later. Regardless, Rossmann claims that his initial support ticket was automatically closed before a full 24-hour response window had elapsed, forcing him to reopen the case and resubmit documentation. The controversy however intensified further from here after Samsung accepted the drive for warranty evaluation but later returned it with a repair report stating that the drive had passed its testing and that the SSD had been verified as functional. Rossmann strongly disputed those claims citing that his own independent testing on PC-3000 showed write speeds reducing to as low as 40–60 MB/s before the drive failed entirely. Samsung subsequently informed him that the SSD had been reset and reflashed, passing internal stress tests. However, the company also stated that replacement units were unavailable due to an industry-wide memory shortage and suggested that a refund process could be initiated if further testing confirmed the fault. Thus, to settle, the company offered a refund of $330, the amount that was initially paid by him to make the purchase. Here, Rossmann pointed out the seeming hypocrisy of the tech giant as in how no Samsung drive was apparently allocated for warranty replacements, but they were abundantly available for retail sales especially when using business accounts. As you can see, Rossmann is indeed right, there are Samsung 990 Pro 4TB SSDs on Amazon currently for $950 (shipped and sold by first-party Amazon US itself), and they are also available on Samsung's own store too, albeit for an even higher price of $1100. Thus Rossmann argues that Samsung’s inability or unwillingness to provide a replacement while the same model remains available for purchase at significantly higher market prices reflects a failure to honor its warranty obligations. He has issued a formal 60-day notice and says he intends to file suit in Texas small claims court, asserting that companies should face greater costs for denying legitimate warranty claims than for fulfilling them. You can check out the full video titled "Samsung's 990 Pro SSD warranty policy is a scam; I'm taking them to court," at the link below. Source and image: Louis Rossmann (YouTube) As an Amazon Associate we earn from qualifying purchases
    • Was it too much to ask to show the icon in this article?
    • Frankly, I blame whoever is writing such articles. "A big improvement/update and/or new feature is now available to everyone! Also, use this unofficial tweak tool to enable it because it actually isn't available to you yet officially and might not in fact even be entirely ready or whatever, hence why it is perhaps not enabled for you*. But it's great and you should enable it!" I mean there's nothing wrong with sharing info about some feature you might need to enable via unofficial means, of course. It's just that these articles tend to essentially end up being two news pieces in one, and one of them tends to be a bit misleading. (*Yes, yes, the "it's a controlled rollout!" thing. Not a fan of that one either. The argument, not the actual rollout.)
    • Thank you. Will do. I read in the release notes that editor config might be at play here.
    • Actually, I think even Microsoft doesn't know how to control it
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      185
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!