Networking problems w/ DSL and hub


Recommended Posts

Okay recently our ISP, Qwest, merged with MSN.

Therefore we got an MSN DSL modem in the mail.

Now, before, with the Cisco 675 DSL modem, I just plugged it into the uplink on our network hub, plugged the other computers in the house into the other ports, and everything worked fine- internet on all 3 computers.

Now, however, with this new modem (NetDSL 800) I can only use one computer connected to the hub at a time. If I connect another computer it says "network error, IP conflict" or something very similar. If I try to renew the IP on whatever computer isn't working, it just hangs for a while then says there was an error renewing the IP.

Any ideas on how to get all the computers to work on the hub?

Keep in mind I'm not very well versed in this area, so the simplest answer possible would be good :)

Link to comment
https://www.neowin.net/forum/topic/3487-networking-problems-w-dsl-and-hub/
Share on other sites

Nope same exact hub, and I agree that it doesnt' seem to be assigning seperate IPs.

  Quote
Originally posted by poolman

I don't know anything about DSL, but, maybe you check the DHCP setting under your network. I know a router automatically does this for you and you have to disable it under yor network settings. Maybe you can make sure it is enabled??

Hope this helps

poolman

Um so is DHCP supposed to be on or off???

a hub is not a router, its a hub. it just transfers data, it has no real brain besides determining where the info is to go.

on the rare times you can plug a dsl or cable modem into uplink, its a fluke with the way the isp's network is set up. if it does not work now you cant do anything about it.

options open. buy a second NIC and then use your computer as a router, for the other computers. or buy a router. option 1 is best costs like 10 bucks. (CDN)

anywho, sorry to tell you the bad news

I used to be on cogeco @home and i could share with just a hub, then i moved back to Ottawa with rogers@home and no more hub share, DHCP (dynamic host config protocol) gives each computer a unique ip addr. each computer must have a unique ip. the sharing of the net with a uplink port on a hub is just luck given the isps config. by all technical means it should not work, but it does :)/... sometimes.

you dont have to have dhcp id you dont want to, you could set ip for each computer if you wanted to, but dhcp makes it easier, and he is right the only way the "uplink-hub" works is if dhcp is enabled, that way you get your ip from a dsl server.

again, 10 buck and 5 mins solves the entire problem

the uplink port is for upgrading your hub. say you have a 4 port hub and get a 5 or 6 comp, you dont need to buy a new 8 port, you can buy another 4 port and plug it into the uplink port and it acts as a 8 port, more or less.

hubs are chain-able by using the uplink port. if someone knows a way to make any connection work over uplink PLEASE PLEASE tell me!!

ok so you choose a "host" computer, say yours, this computer must be on for the others to use the internet. in that computer there are to network cards. 1 connects to the dsl modem, the other connects to the hub in a normal jack. all the others connect to the hub like normal. then in xp go to the network properties box and tick "share connection" for the dsl network card. a little salt for flavor stir, mix garnish with lime. ta-da

  Quote
Originally posted by Killa-b

ok so you choose a "host" computer, say yours, this computer must be on for the others to use the internet. in that computer there are to network cards. 1 connects to the dsl modem, the other connects to the hub in a normal jack. all the others connect to the hub like normal. then in xp go to the network properties box and tick "share connection" for the dsl network card. a little salt for flavor stir, mix garnish with lime. ta-da

Love that ending! Thats Great

  Quote
Originally posted by Killa-b

ok so you choose a "host" computer, say yours, this computer must be on for the others to use the internet. in that computer there are to network cards. 1 connects to the dsl modem, the other connects to the hub in a normal jack. all the others connect to the hub like normal. then in xp go to the network properties box and tick "share connection" for the dsl network card. a little salt for flavor stir, mix garnish with lime. ta-da

Love that ending! Thats Great

  Quote
Originally posted by Killa-b

ok so you choose a "host" computer, say yours, this computer must be on for the others to use the internet. in that computer there are to network cards. 1 connects to the dsl modem, the other connects to the hub in a normal jack. all the others connect to the hub like normal. then in xp go to the network properties box and tick "share connection" for the dsl network card. a little salt for flavor stir, mix garnish with lime. ta-da

Thanks, that's about what I figured you would have to do... I've messed around with sharing a dial up connection the same way.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • So I have a confession to make : I've used PCs mostly with Intel processors for over 30 years, I've been a developer for 12 years, chosen Intel PCs for my dev team at work, managed those PCs with MS Intune... And I still have no idea what "vPro" is or why I would need it.
    • XRECODE3 1.166 by Razvan Serea xrecode3 is a converter and audio-grabber which allows you to convert from mp3, mp2, wma, aiff, amr, ogg, flac, ape, cue, ac3, wv, mpc, mid, cue ,tta, tak, wav, wav(rf64), dts, m4a, m4b, mp4, ra, rm, aac, avi, mpg, vob, mkv, mka, flv, swf, mov, ofr, wmv, divx, m4v, spx, 3gp, 3g2, m2v, m4v, ts, m2ts, adts, shn, tak, xm, mod, s3m, it, mtm, umx, mlp to m4a, alac, ape, flac, mp3, mp4 (using NeroAAC), ogg, raw, wav, wav(rf64), wma, WavPack, mpc, mp2, Speex, ofr, ac3, aiff, tak, snd and Shorten formats. Command Line parameters are supported. XRECODE3 features: Works on XP, Vista, Windows 7, Windows 8, 10 32/64 bit versions and under Wine. Parallel conversion by utilizing power of multi-core CPUs. Support of embedded CUE sheets (for FLAC, WavPack, APE and TAK files). Support of mp4, mka chapters (can split mp4, mka by chapters to any supported format). Built-in Metadata editor with Cover Art support. Has support for LossyWav. Supports portable mode. Merge input files to one large audio file and create CUE sheet. Converting to many formats at once using "Multiple" output mode. Grabbing of multi-channel Audio CDs to the desired format at once. Informative and resizable UI suited even for netbooks. Extracting audio from flv, avi, mov etc. video files (multiple audio streams are supported). Can export/import Metadata to/from external file. Support for 24/32bit audio files. Multilanguage support. Currently program is available in Dutch, English, French, Japanese, Korean, Polish, Russian, Hungarian, Italian, Spanish, Spanish Traditional, Swedish, Brazilian Portuguese, German, Finnish, Bulgarian, Czech, Danish and Chinese (simplified) languages. What's new in XRECODE3: Native 64bit support. Added support for DSD/DST and DFF formats (including handling of SACD ISOs). Added option to extract audio without transcoding. Added option to encode several files to one multi-channel file. Added option to split file into individual track-per-channel for all available output formats. Added option to merge files per folder. Output and Metadata settings are now output format specific. Enhanced Metadata settings. Added support for multiple Cover pictures in Metadata editor. Added 32bit int/float output for formats which support them (e.g. WAV). Added dithering option in Output Settings. Added option to use EBUR128 in Normalize. Added option to Album Mode Normalize. Added option to configure Matrices under Output Settings. Added more output file pattern elements. Tabbed UI. CUE files are now displayed more nicely. Enhanced Shell Extension. XRECODE3 1.166 changelog: fixed crash when opening a file without an audio stream. fixed issue when applying tempo to some files. fixed issue with handling of some .ofr files. Download: XRECODE3 v1.166 (64-bit) | Portable | ~30.0 MB (Shareware) Download: XRECODE3 v1.166 (32-bit) | Portable Link: XRECODE3 Homepage | XRECODE3 Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • OBS Studio 31.1.0 Beta 2 by Razvan Serea OBS Studio is software designed for capturing, compositing, encoding, recording, and streaming video content, efficiently. It is the re-write of the widely used Open Broadcaster Software, to allow even more features and multi-platform support. OBS Studio supports multiple sources, including media files, games, web pages, application windows, webcams, your desktop, microphone and more. OBS Studio Features: High performance real time video/audio capturing and mixing, with unlimited scenes you can switch between seamlessly via custom transitions. Live streaming to Twitch, YouTube, Periscope, Mixer, GoodGame, DailyMotion, Hitbox, VK and any other RTMP server Filters for video sources such as image masking, color correction, chroma/color keying, and more. x264, H.264 and AAC for your live streams and video recordings Intel Quick Sync Video (QSV) and NVIDIA NVENC support Intuitive audio mixer with per-source filters such as noise gate, noise suppression, and gain. Take full control with VST plugin support. GPU-based game capture for high performance game streaming Unlimited number of scenes and sources Number of different and customizable transitions for when you switch between scenes Hotkeys for almost any action such as start or stop your stream or recording, push-to-talk, fast mute of any audio source, show or hide any video source, switch between scenes,and much more Live preview of any changes on your scenes and sources using Studio Mode before pushing them to your stream where your viewers will see those changes DirectShow capture device support (webcams, capture cards, etc) Powerful and easy to use configuration options. Add new Sources, duplicate existing ones, and adjust their properties effortlessly. Streamlined Settings panel for quickly configuring your broadcasts and recordings. Switch between different profiles with ease. Light and dark themes available to fit your environment. …and many other features. For free. At all. OBS Studio 31.1.0 Beta 2 changelog: Adjusted volume mixer styling on Classic theme [Warchamp7] Enabled font size option for macOS in appearance settings [gxalpha] Fixed an issue in Beta 1 where the projector menu for disabled preview was incorrect [Warchamp7] Fixed an issue in Beta 1 where opening appearance settings would enable the Apply button [Warchamp7] Fixed an issue in Beta 1 with menu bar padding [Warchamp7] Fixed an issue in Beta 1 with cut off text in Auto-Configuration Wizard [shiina424] Fixed an issue in Beta 1 with tab padding for new UI Appearance options [COOLIGUAY] Fixed an issue in Beta 1 where AMF AV1 B-frames did not work when using CQP [rhutsAMD] Download: OBS Studio 31.1.0 Beta 2 | Portable | ~200.0 MB (Open Source) View: OBS Studio Homepage | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Brave 1.79.119 by Razvan Serea Brave Browser is a lightning-fast, secure web browser that stands out from the competition with its focus on privacy, security, and speed. With features like HTTPS Everywhere and built-in tracker blocking, Brave keeps your online activities safe from prying eyes. Brave is one of the safest browsers on the market today. It blocks third-party data storage. It protects from browser fingerprinting. And it does all this by default. Speed - Brave is built on Chromium, the same technology that powers Google Chrome, and is optimized for speed, providing a fast and responsive browsing experience. Brave Browser also features Brave Rewards, a system that rewards users with Basic Attention Tokens (BAT) for viewing opt-in ads. This innovative system provides an alternative revenue model for content creators and a way to support the Brave community. Brave 1.79.119 changelog: [Security] Added a conditional host check in binding handlers as reported on HackerOne by newfunction. (#46181) Fixed procedural filters not matching against dynamically added child elements. (#46208) Upgraded Chromium to 137.0.7151.68. (#46515) Download: Brave Browser 64-bit | 1.2 MB (Freeware) Download: Brave Browser 32-bit View: Brave Homepage | Offline Installers | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      Vladimir Migunov earned a badge
      One Year In
    • One Month Later
      daelos earned a badge
      One Month Later
    • Week One Done
      daelos earned a badge
      Week One Done
    • Mentor
      Karlston went up a rank
      Mentor
    • One Month Later
      EdwardFranciscoVilla earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      494
    2. 2
      snowy owl
      252
    3. 3
      +FloatingFatMan
      250
    4. 4
      ATLien_0
      225
    5. 5
      +Edouard
      183
  • Tell a friend

    Love Neowin? Tell a friend!