• 0

Error disabling Connection


Question

I would like to disable my eithernet network connection and I get a error saying error disabling connection - It is not possible to disable the connection at this time. This connection maybe using one or more protocols that do not support Plug and play, or it may have been initiated by another user or the system account., If any help it would be great.

Link to comment
https://www.neowin.net/forum/topic/348866-error-disabling-connection/
Share on other sites

16 answers to this question

Recommended Posts

  • 0
got the same problem any help?

586459729[/snapback]

my problem was because i installed xpize and netcfgx.dll got changed in such a way that it would no longer function. try replacing that file with a known-to-be good file using an app called replacer and see if that helps.

  • 0

THIS HELPED ME!!!!

PRB: Cannot Enable or Disable a Network Device from the Network Connections Folder

SYMPTOMS

If you have a network device driver with an unsigned co-installer and you use the Windows XP operating system, you cannot disable or enable the device from the Network Connections folder (that is, you cannot right-click the device and then click Enable/Disable).

You can, however, enable or disable the device from the Device Manager.

CAUSE

The Device Manager runs in the logged-on user context and is, therefore, allowed to disable or enable devices with unsigned co-installers. However, the request from the Network Connections folder to enable or disable devices is sent to a LocalSystem service, which is not allowed to enable or disable devices because an unsigned co-installer cannot be trusted to run in the logged-on user context.

STATUS

This behavior is by design.

  • 0

I have exactly this same problem,

This happened when I installed Autopatcher XP August 2006.

I get this very error of not being able to disable internet connection from connections menu. I have to do it everytime from the device manager.

So far I have tried replacing netcfgx.dll and it didn't work. And I have also tried the following method too..

corrupted crypo service database...

Click Start, click Run, type cmd in the Open box, and then OK.

At the command prompt, type the following commands, pressing ENTER after each line:

net stop cryptsvc

ren %systemroot%\System32\Catroot2 oldcatroot2

reboot the computer back to normal mode.

None of them worked for me. Please tell me what to do.

Regards,

Furqan

i've had lots of similar problems when i installed xpize :pinch: very poor software

What did you do remove them? Except for ofcourse a new install.

  • 0

Hello everyone, I've been looking into this problem and I think I've come to a solid conclusion. My first hint was numerous posts regarding Cryptographic Services. Anyways it seems that this error is caused by corruption in the db or problems with registered DLL files required by the service. Awhile back I found a little batch script that fixes common Cryptographic Services problems; this script was originally created to correct a Windows Update error (0x800710D9) but seems to also be relevant in this situation that seems to be caused by Autoruns. I suspect by the Speed Tweaks area; but this is just a guess.

This script has been tested on SP1 and SP2 Windows XP Pro systems, should work fine for Home as well.

Hope it helps you all out

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

  • 0

Hello everyone, I've been looking into this problem and I think I've come to a solid conclusion. My first hint was numerous posts regarding Cryptographic Services. Anyways it seems that this error is caused by corruption in the db or problems with registered DLL files required by the service. Awhile back I found a little batch script that fixes common Cryptographic Services problems; this script was originally created to correct a Windows Update error (0x800710D9) but seems to also be relevant in this situation that seems to be caused by Autoruns. I suspect by the Speed Tweaks area; but this is just a guess.

This script has been tested on SP1 and SP2 Windows XP Pro systems, should work fine for Home as well.

Hope it helps you all out

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

Thanks.. my problem solved using this method..

so is there anyhting else I need to take care of ?

  • 0

If you... cannot disable or enable the device from the Network Connections folder (that is, you cannot right-click the device and then click Enable/Disable).

You can, however, enable or disable the device from the Device Manager.

That helped me to remove an annoying "Bluetooth-Disconnected" icon from my [32-bit] systray. It was so easy, I'm sure to be the hero on someone else's computer, too. Thanks.

  • 0

New to this forum so Hello everyone. I would like to try the method that tripbert gave to fix the Error Disabling Connection message problem. Unfortunately unlike gr8leo87, I need a little more help. I know how to copy what tripbert posted that is in between Start and Stop, but I don't know how to paste it into a file. I certainly tried, and even renamed one, but I couldn't paste the info in to it and was even sure where the file should go if I could. If any of you could give me a step by step explanation on how to accomplish this I'd appreciate it. Like others here, although this problem isn't a big deal, it still bothers me. I'm not sure exactly when it began, but it worked fine up until an install of AVG Internet Security Suite about two weeks ago, (Uninstalling it didn't make a difference) and updated to the newest FireFox version and McAfee SiteAdvisor. Other than that I'm not sure what caused this Error, and that's what bothers me the most about it I think. LOL. I did uninstall and reinstall the Wireless Network Adapter, as I was also getting a message that it may not be installed correctly. whenever I tried to use the repair feature. Anyway thanks ahead of time, it will certainly be appreciated.

  • 0
Hello everyone, I've been looking into this problem and I think I've come to a solid conclusion. My first hint was numerous posts regarding Cryptographic Services. Anyways it seems that this error is caused by corruption in the db or problems with registered DLL files required by the service. Awhile back I found a little batch script that fixes common Cryptographic Services problems; this script was originally created to correct a Windows Update error (0x800710D9) but seems to also be relevant in this situation that seems to be caused by Autoruns. I suspect by the Speed Tweaks area; but this is just a guess.

This script has been tested on SP1 and SP2 Windows XP Pro systems, should work fine for Home as well.

Hope it helps you all out

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

1 year later thank you so much for this trick my internet work fine now!

  • 0
1 year later thank you so much for this trick my internet work fine now!

I went into the device manager, right clicked my Ethernet connection and the drop-down menu gave the option to "enable" but "disable" was not present. It was already enabled from the Control Panel so I found this confusing. However, I enabled via the Device Manager, then disabled via the Control Panel, and it worked. I have no idea what all that scripting is or for, but there are some very interesting things that can be done w/ @echo off...

  • 0

hi ...........

wre 2 paste this one and how 2 proceed....

thank u

Copy between --START-- and --END-- then just paste into a file and name it fixdb.bat

--START--

@echo off

:: Batch file that tries to remedy error # 800710D9

:: "Unable to read from or write to the database".

:: Author: Torgeir Bakken

:: Date: 2004-08-30

cls

echo This batch file will now try to remedy the error 0x800710D9.

echo To abort and not run it now, hold down Ctrl and press C.

echo Otherwise press the space bar to continue.

pause

:: Stop the Cryptographic service

%SystemRoot%\System32\net.exe stop CryptSvc

:: Rename all log files in the %SystemRoot%\Security folder

FOR %%a in (%SystemRoot%\Security\*.log) DO move /y %%a %%a.old

:: Rename the %SystemRoot%\System32\CatRoot2 folder

move /y %SystemRoot%\System32\CatRoot2 %SystemRoot%\System32\CatRoot2old

IF not exist %SystemRoot%\System32\CatRoot2 GOTO CONT01

:: In case the folder rename failed because of locked files

:: rename all log files in the %SystemRoot%\System32\CatRoot2 folder

FOR %%a in (%SystemRoot%\System32\CatRoot2\*.log) DO move /y %%a %%a.old

SET catroot2locked=True

:CONT01

cls

echo.

echo Please wait, this might take some time...

:: Unregister DLL files that are associated with Cryptographic Services

CD /D %SystemRoot%\System32

start /wait regsvr32.exe /s /u softpub.dll

start /wait regsvr32.exe /s /u wintrust.dll

start /wait regsvr32.exe /s /u initpki.dll

start /wait regsvr32.exe /s /u dssenh.dll

start /wait regsvr32.exe /s /u rsaenh.dll

start /wait regsvr32.exe /s /u gpkcsp.dll

start /wait regsvr32.exe /s /u sccbase.dll

start /wait regsvr32.exe /s /u slbcsp.dll

start /wait regsvr32.exe /s /u cryptdlg.dll

:: Reregister DLL files that are associated with Cryptographic Services

start /wait regsvr32.exe /s softpub.dll

start /wait regsvr32.exe /s wintrust.dll

start /wait regsvr32.exe /s initpki.dll

start /wait regsvr32.exe /s dssenh.dll

start /wait regsvr32.exe /s rsaenh.dll

start /wait regsvr32.exe /s gpkcsp.dll

start /wait regsvr32.exe /s sccbase.dll

start /wait regsvr32.exe /s slbcsp.dll

start /wait regsvr32.exe /s cryptdlg.dll

:: Configure and start the Cryptographic service

%SystemRoot%\system32\sc.exe config CryptSvc start= auto

:: Start the Cryptographic Service

%SystemRoot%\system32\net.exe start CryptSvc

cls

echo.

If "%catroot2locked%"=="True" GOTO CONT02

echo Finished, please reboot the computer and then try to install SP2 again...

GOTO END

:CONT02

echo Please run the batch file again with a newly restarted computer...

echo (but if it is newly restarted, just do a reboot and then try

echo to install SP2 again)...

GOTO END

:END

echo.

pause

--END--

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Wow, imagine you dump hundreds of hours into completing things and unlocking stuff and you lose it all. Back in the day when cheats were built into games, you could at least unlock things again that way without spending hundreds of hours again. But those days are long gone for some reason as no one builds cheats into games anymore. So it's even more painful that studio that's on its 6th installment **** it up so badly.
    • Spotify finally removes the disco ball app icon in the latest update by Ivan Jenic Image: Spotify Spotify has just released an update that removes its now infamous disco ball icon. The update reverts the app icon to the familiar flat green logo after weeks of mixed reactions online. The icon arrived on May 13 as part of the company's 20th anniversary celebration and was always intended to be temporary, though Spotify only confirmed that after the backlash started. The disco ball took the internet by storm, as the reception was split. A vocal group of users called it ugly and disorienting, with some iOS users noting that the 3D glowing effect made the app look like it was stuck mid-update. On the other end, the icon picked up a following of its own. Its retro, three-dimensional look immediately stood out against the flat, minimalist aesthetic that has dominated app design for years. It even started a small movement, spawning what people started calling "discomorphism," a mashup of disco and skeuomorphism. Other brands started posting disco ball versions of their own logos, probably in an effort to ride the wave of memes that flooded the internet during late May. Spotify has had a turbulent relationship with its user base lately. Besides the disco ball icon, which certainly wasn't appreciated by everyone, the company has also received backlash for its willingness to include AI-generated music on its platform. On May 17, Spotify promised the old icon would return “in a few weeks.” And now it looks like that time has finally arrived. So, whether you liked the disco ball or it made you uncomfortable, it’s now gone for good. The next time you update the Spotify app on your phone, the old, flat-design icon will return.
    • Playground Games confirms Forza Horizon 6 save wipe bug by Taras Buria Forza Horizon 6 was launched last month to critical acclaim (check out our review here), and it became a smash hit in an instant. Now, weeks into the launch, with die-hard fans clocking hundreds of hours, Forza Horizon 6 is facing a serious issue: save wipes. After multiple complaints on Reddit and social media, the studio issued a statement. The problem with missing saves came shortly after Playground Games promised the initial batch of gameplay tweaks and improvements. Unfortunately, there seems to be no temporary fixes for those affected by unexpected save wipes. However, the studio published a new support document with a few important steps users should try. First, affected gamers should open a support ticket immediately (go here to file one) so that the support team can try recovering the lost progress by reverting to an earlier save. Playground Games says this should be done the same day the issue occurs. Meanwhile, gamers are urged not to start new play sessions or create new saves. The studio also published a few things gamers should try to avoid to prevent potential progress loss: Ensure your Gaming Services app on PC or XBOX Series X|S console is fully up to date. On XBOX Series X|S consoles, disable Quick Resume for Forza Horizon 6: To disable Forza Horizon 6 from using Quick Resume, highlight the game box art anywhere in the console experience (Home, My Games & Apps, Pins, etc) and then press the Menu button, then go to Manage game and add-ons > Quick Resume settings > Disable Quick Resume. Ensure you are online when ‘quitting’ the game. Give your saved time to sync to the cloud before powering off or switching devices. Do not force quit the game during save screens. Do not power off the device during gameplay. Always "Quit" (console) or "Exit to desktop" (PC) once you've finished your play session, ensuring the save icon is not visible when you’re closing the game. Before turning off your console, shutting down your PC, or force-closing the Steam app, give your devices or clients at least a few minutes to ensure your latest progress has been synchronized with the cloud. This will reduce the risk of progress reversions as you switch between different platforms. XBOX Series X|S consoles, Steam, and the XBOX app on PC all include game save indicators that confirm your progress has been synced. You can read more about the bug in the official support document here. Forza Horizon 6 is currently available on PC (Steam and the Microsoft Store), Xbox Series X|S, and Game Pass. The game is also coming to PlayStation 5 later this year.
  • Recent Achievements

    • One Year In
      slackerzz earned a badge
      One Year In
    • One Year In
      highriskpaym earned a badge
      One Year In
    • One Month Later
      highriskpaym earned a badge
      One Month Later
    • Week One Done
      highriskpaym earned a badge
      Week One Done
    • Week One Done
      FBSPL earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      520
    2. 2
      PsYcHoKiLLa
      197
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!