• 0

whats the Best Disk Defragmenter?


Question

Recommended Posts

  • 0
  • 0

I like PerfectDisk better, but it gave me problems with running Boot Time defrags. It would never start and just reboot back into Windows. Diskeeper has always been able to run a flawless boot time defrag, but I never really noticed any disk performance issues. I turn off indexing for my HDD's, and everything just fires right up as soon as I double click an icon or a folder. I currently use Diskeeper, but on my next reformat I might install PD again and give it another try.

  • 0
Speed disk takes way to long to defragment..and even after its done, its hard to tell whether it even did anything or not.

After running Diskeeper, my system didn't seem any faster.  But after running PerfectDisk, I could actually tell that my system ran more smoothly and programs loaded faster.

The key for me is that the space is contiguous. I delete all my temp files prior to defragging, and of course do the scan disk for errors and fix 'em thing (used to be called scandisk, but Microsoft likes to rename crap and confuse you) but Diskeeper seems no better than Norton in regards to making things contiguous.

Silly programs. Do what I freakin' want you to do and stop messin' around.

Why can't we just shut down to the command line like we could in Windows 3.1 and then run defrag from there?

We need a bootable command line option with full long file name / ntfs support so we can drop to a boot floppy or cd and run a command line based util outside the multitasking nature of the OS.

Kinda like how I can run Norton Ghost 2003 for DOS off of a floppy. Gets every single file, no sweat.

  • 0
PerfectDisk

O&O & Diskeeper both require service that runs all the times

586334928[/snapback]

You can simply disable the service via control panel > administrative tools, then just turn it back on when you want to defrag :yes:

As per my post above, does PerfectDisk allow "intelligent" scheduled maintenence? IE: will it only perform the scheduled maintenence if the degree of fragmentation on the disk exceeds a certain percentage (5%, 10%, etc.)?

If so, I'll definately have to give it a go.

  • 0
Still, kinda lame they do that.  Why can't stuff just load only when you execute the program?

586335044[/snapback]

It probably has something to do with scheduled defrags. Which brings me to my previous post - anyone know if PerfectDisk has what I'm talking about?

  • 0
It probably has something to do with scheduled defrags. Which brings me to my previous post - anyone know if PerfectDisk has what I'm talking about?

586335066[/snapback]

http://www.raxco.com/products/perfectdisk2...2k_features.cfm

User-defined thresholds for defragmentation

Allows you to limit the times when PerfectDisk is run to only when a certain level of fragmentation is reached, thereby reducing unnecessary runs.

appears so... might give perfectdisk a whirl again... last time i used it it would always BSOD on the page file. Dunno why, so swapped to OO defrag.

  • 0
The key for me is that the space is contiguous.  I delete all my temp files prior to defragging, and of course do the scan disk for errors and fix 'em thing (used to be called scandisk, but Microsoft likes to rename crap and confuse you) but Diskeeper seems no better than Norton in regards to making things contiguous.

Silly programs.  Do what I freakin' want you to do and stop messin' around.

Why can't we just shut down to the command line like we could in Windows 3.1 and then run defrag from there?

We need a bootable command line option with full long file name / ntfs support so we can drop to a boot floppy or cd and run a command line based util outside the multitasking nature of the OS.

Kinda like how I can run Norton Ghost 2003 for DOS off of a floppy.  Gets every single file, no sweat.

586334958[/snapback]

As I do the same..clean up system using CClean and Advanced System Optimzer: Privacy Protector before running PerfectDisk. I also make sure no programs are running. Quick question though..isn't the 'Offline Defragment' kinda what you're talking about? Oh and one more question about defragmenting..would you get better defragmentation results if you defragmented in 'Safe Mode'? Sorry for the newbie question. :blush:

  • 0

Here is PerfectDisk 7 saying it has done a full-on defrag:

perdisk1.png

I captured it at 99% second round to show the progress. The map is the same in the above as when it is 100% done and that summary page pops up.

Sure does not look 100% contiguous to me. :(

  • 0
Perfect Disk by far is the best

If you could, please explain the above and why Perfect Disk seemingly does no better than Diskeeper, or Norton Speed Disk for that matter.

I'm not saying Perfect Disk is not a decent app, but surely it's not the be-all-end-all that some may claim, no?

  • 0
If you could, please explain the above and why Perfect Disk seemingly does no better than Diskeeper, or Norton Speed Disk for that matter.

I'm not saying Perfect Disk is not a decent app, but surely it's not the be-all-end-all that some may claim, no?

586336648[/snapback]

Ok, I will elaborate some more. Basically I have tried both Diskeeper and PerfectDisk, Diskeeper used to take a long, long, long time to defrag my hardive and when it finished I couldnt notice any speed difference.

Then I thought whats the point of bothering to defrag if I cant notice any difference? So I switched to PerfectDisk and I found that it defragged a lot faster than Diskeeper and then I selected "Smart Placement" I found my computer started faster (I did both normal defrag and offline defrag and timed it with Bootvis and its shaved 7 seconds off the boot time).

However, to each his own.

One disadvantage with PerfectDisk is that it is not very fast at defragging FAT 32 drives, so if you really want to maximise the use of the program then convert to NTFS ;)

  • 0
One disadvantage with PerfectDisk is that it is not very fast at defragging FAT 32 drives, so if you really want to maximise the use of the program then convert to NTFS  ;)

Another user was able to help me figure out that there were some settings under a different menu area. Instead of being in the TOOLS > ADVANCED CONFIGURATION menu and dialog, where all of the other key settings seem to be, these additional settings are under the DEFRAGMENT > DRIVE PROPERTIES menu and dialog. Silly GUI builders.

Anyway, there is the OFFLINE DEFRAG SETTINGS tab:

perdisk3.png

and once I set that and had it reboot and defrag with those 3 options, the final result looked like this:

perdisk4.png

Which is much more what one would expect. Not perfect, but much closer.

I'm glad it has a dedicated option for FAT / FAT32 directories instead of just abandoning these formats. FAT 32 comes in mega-handy for dual boot and game / app compatibility stuff, so it's good that Perfect Disk can handle them.

Bummer it can't do it all from inside of Windows, but kudos that it has the option to do it all in an offline defrag.

Thanks for the comments and assistance. :)

  • 0

I place a vote for PerfectDisk (Y)

Ive found it to be great. However it wont run anymore for me - i disabled a bunch of services i didnt think i needed in Windows and now Perfectdisk wont start the defrag. I cant figure out which service it is i have to reenable too :(

  • 0
I place a vote for PerfectDisk (Y)

Ive found it to be great. However it wont run anymore for me - i disabled a bunch of services i didnt think i needed in Windows and now Perfectdisk wont start the defrag. I cant figure out which service it is i have to reenable too :(

586337195[/snapback]

Did you check to make sure the "task scheduler" service was enabled to automatic? Other than that, i cannot think of any windows services that it would run off of, unless PD installs/needs its own services?

  • 0
I place a vote for PerfectDisk (Y)

Ive found it to be great. However it wont run anymore for me - i disabled a bunch of services i didnt think i needed in Windows and now Perfectdisk wont start the defrag. I cant figure out which service it is i have to reenable too :(

586337195[/snapback]

Right click 'My Computer' -> Manage -> Services & Applications -> Services -> Right click 'PDEngine' and set 'Startup type' to 'Manual'.Click 'Apply' then 'OK'

Do the same for 'PDSheduler' - though you can set this to 'Automatic' if you want, if you have sheduled defragmentaions.

Edited by Dark Ride
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Salesforce to acquire Fin, formerly Intercom, for over $3 billion by David Uzondu Image via DepositPhotos.com Salesforce today announced that it has reached an agreement with customer support software company Fin to buy the company for around $3.6 billion. Salesforce expects the transaction to close in the fourth quarter of its fiscal year 2027, and the acquisition will not change its financial guidance previously announced on May 27. Marc Benioff, CEO of Salesforce, in its press release, claimed that acquiring the startup gives Salesforce an immediate AI agent that resolves support tickets across email, WhatsApp, SMS, and Slack: You might know Fin by its former name, Intercom. If you have ever been on a website or inside a mobile app and noticed a little chat bubble widget floating in the bottom right corner of your screen, often featuring a friendly face and a message like, "Hi! How can we help you today?" you were almost certainly looking at Intercom. Intercom became Fin just last month, transforming itself into an "AI-first" platform that handles customer issues with little need for humans to intervene. The new name originates from the company's highly successful AI customer service agent, which it launched way back in 2023. This digital assistant supposedly resolves about 76% of customer service volume end-to-end on its own, so the business rebranded to match its primary software tool. Fin's new owners, Salesforce, went on an acquisition spree over the last few years, and some of them you might recognize, like its 2020 $27.7 Billion acquisition of Slack. The last few months saw the enterprise giant buy several startups, including m3ter, Momentum, Cimulate, and Contentful. Salesforce said that when the Fin deal pulls through, customers will "deploy AI agents across" various service operations, which will complement Agentforce, the platform that enables businesses to deploy customizable autonomous digital workers.
    • Microsoft now allows you to tweak Visual Studio to new extremes by Usama Jawad Visual Studio 2026 recently netted a powerful feature that finally allows developers to review Git Pull Requests (PRs) directly in the integrated development environment (IDE), without needing to switch to the browser. However, that's not all that Microsoft introduced in the latest version, as it also offered a useful way to customize the IDE to their heart's content. Although Visual Studio 2026 already provides lots of stock themes based on Fluent Design principles, Microsoft understands that people still want to customize them further according to their preferences. The IDE now offers a new configuration page for themes under Tools > Options > Environment > Visual Experience > Theme colors. This allows you to set hex color codes for accent colors, hover states, and more, and apply them without requiring a restart. The Redmond tech giant further says that: Microsoft is also offering granular color tokens that allow you to customize various UX elements like the tab header without impacting the rest of the shell chrome. Your themes are also stored in JSON format in %LOCALAPPDATA%\Microsoft\VisualStudio\18.0_xxxxxxxx\ColorThemes, which basically enables you to share it with others or override existing themes. This is a major improvement in terms of the user experience powering these customization capabilities. This is because extensions were required to replace the theme, and it was not very easy to make minor adjustments. This theme configuration UX solves this problem and is available in Visual Studio 2026 version 18.7, available here.
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      201
    3. 3
      PsYcHoKiLLa
      127
    4. 4
      Steven P.
      82
    5. 5
      ATLien_0
      76
  • Tell a friend

    Love Neowin? Tell a friend!