What does a player get for landing on free parking?  

174 members have voted

  1. 1. What does a player get for landing on free parking?

    • $500 From the Bank
      7
    • $500 and all taxes & fines
      37
    • All taxes and fines
      82
    • Nothing
      48


Recommended Posts

In the rules it states that when a player lands on free parking, they are supposed to get nothing.

But I'm finding out that people play the game differently. Some people have a $500 bill sitting in the middle of the board, and when someone lands on Free Parking, they get it, and it is replaced for the next person who lands on free parking.

Some players do the above, and also add all taxes and fines from Luxury Tax, Income Tax, Chance fines, and Community Chest fines to the pot.

If you've heard of any other variations, post them!

Official Monopoly Rules:

Free Parking:

A player landing on this place does not receive any money, property or reward of any kind.

This is just a "free" resting-place.

-Ax

Edited by Axon
Link to comment
https://www.neowin.net/forum/topic/357056-monopoly-free-parking/
Share on other sites

From the rules....

Free Parking Jackpot

Rule: $500 is placed in the middle of the board at the start of the game. Any time a player must pay a fine or tax the money also is put in the middle of the board. Whenever a player lands on Free Parking, he or she gets the money in the middle.

Clarifications: The $500 is not replaced after the jackpot is first taken. It is only for the first lucky player to land there.

What streets do you have in the American version of monopoly? It seems they give you $'s too instead of ?'s.

586358720[/snapback]

The Wikipedia artcile has an HTML board that uses the North American street names & dollar prices:

http://en.wikipedia.org/wiki/Monopoly_%28game%29

-Ax

From the rules....

Free Parking Jackpot

Rule: $500 is placed in the middle of the board at the start of the game. Any time a player must pay a fine or tax the money also is put in the middle of the board. Whenever a player lands on Free Parking, he or she gets the money in the middle.

Clarifications: The $500 is not replaced after the jackpot is first taken. It is only for the first lucky player to land there.

586358703[/snapback]

Thats wrong. There is never supposed to be any money the middle. All fines/taxes go to bank. Adding money in there and letting people get it only makes the game last longer. Ive actually read a book about monopoly rules/backstory/startegies, and believe there should be no money in the middle at any point. The top post has the correct rules.

While I am an avid boardgame player, I have not played Monopoly in many, many years. However, when I did we always started with $500 in the center and then added all fines and taxes to it to be picked up by players landing on Free Parking.

586359051[/snapback]

That's the way I use to played it.

The Wikipedia article addresses the this issue, it states that there are two sets of rules:

Official Rules

House Rules

House rules seems to be where there are those rules that make the game last longer.

I personally enjoy long, drawn out, 4 day long Monopoly feuds!

-Ax

I've always played it with $500 in the middle and all the fines/taxes go into the pile throughout the game. But other people play it differently. I know that I play Risk differently than others, so it was a little difficult to adjust at school.

There is never supposed to be any money the middle. All fines/taxes go to bank. Adding money in there and letting people get it only makes the game last longer. Ive actually read a book about monopoly rules/backstory/startegies, and believe there should be no money in the middle at any point. The top post has the correct rules.

YEP! no money in the middle! :yes

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft finally admits its default Windows 11 25H2, 24H2 action broke key legacy component by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. So far the company has acknowledged two known issues that have popped up after the release which include bugged-out Office apps as well as the Recycle Bin; though there could be more at play too. Speaking of bugs and issues, Microsoft seems to have finally acknowledged a problem that probably has been around for close to a year. That's because back in July of 2025 the company made a default change to the latest Windows 11 versions, wherein it switched to JScript9Legacy on Windows 11 24H2 and later releases. Hence following the release of version 25H2 in October 2025, JScript9Legacy also remained default-enabled. As a result there has been a compatibility issue ever since then. For those wondering, by switching to JScript9Legacy Microsoft intended to improve the security of modern Windows PCs by reducing vulnerabilities tied to legacy scripting like cross-site scripting (XSS), among others. XSS exploits can allow cyber-attackers to attach malicious code onto legitimate websites and use them to execute the code when a potential victim loads such a website. Hence the new JScript9Legacy engine enforced stricter execution policies and improved object handling, which should help mitigate such attacks. Microsoft today has published a new support article detailing the problem. Neowin spotted it while browsing. The company says that JScript global definitions and execution context may fail to persist across scripts, potentially breaking older dependent apps and web-based components that relied on this legacy behavior. In the article Microsoft has confirmed that the issue stems from its move away from the older jscript9.dll engine in favor of jscript9legacy.dll. As mentioned above, while the newer engine was designed to address vulnerabilities and strengthen security it also changes how JScript handles execution context. As a result functions and definitions loaded by one script could no longer remain available to subsequent scripts once execution ended. The company notes that some applications worked correctly on earlier Windows versions because the older JScript engine automatically retained global definitions and execution state between scripts. Under the newer model though that behavior is disabled by default causing certain legacy workloads and polyfill-dependent scripts to fail. Microsoft says it addressed the problem via the KB5077241 update though the fix had not been enabled automatically in the following updates. As such admins must explicitly turn on persistent JScript execution context using a Registry setting that the tech giant shared today. The configuration can be applied to individual processes or system-wide through the FEATURE_ENABLE_PERSISTENCE registry key. The steps have been outlined below: Run the following command to create the feature control registry key: reg add "HKLM\Software\Policies\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ENABLE_PERSISTENCE" Under this key, create a new DWORD (32-bit) value. Configure the value as follows: To enable persistence for specific processes only: Set the value to 1 for each target process name. To enable persistence for all processes: Add * as the key name and set its value to 1. You can find the official support article here on Microsoft's website.
    • The possibility that milk gathers back into a glass implies that gravity can be 'reversed'.
    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      590
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      76
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!