best LINUX File System ?


Recommended Posts

OK. First of all: There is no single best filesystem. If there was

one particular filesystem that was better than all of the others, do

you think anybody would continue to use those others? No they wouldn't

- everybody would be using this super-filesystem.

In the real world, every filesystem has its strengths and weaknesses.

For an average everyday desktop, I'd choose either ext3 or reiserFS -

ext3 can be read from windows fairly easily, and reiser is perhaps

marginally faster. Both are very stable, and both are journaled

filesystems, so no long filesystem checks during boot.

XFS, JFS, reiser4, et al are good if you know you have a specific need for them,

but as its just going to be a normal desktop box, I wouldn't worry

about them.

  Knight said:
For desktop Linux I wouldn't reccomend ReiserFS, mainly because it doesn't fully support extended atributes, so things like Beagle and a few other search tools don't like it. I use it, however, it's a good FS aside from that.

586370825[/snapback]

Umm.....

Are you sure I don't know much about file systems, but this is on the 2.6.11.* kernel mabye even lower

  Kernel2.6.13rc5 said:
ReiserFS extended attributes (REISERFS_FS_XATTR)

Extended attributes are name:value pairs associated with inodes by

the kernel or by users (see the attr(5) manual page, or visit

<http://acl.bestbits.at/> for details).

If unsure, say N.

  ranasrule said:
iam leanin towards ext3....can i convert later 2 somethin else ?

586371303[/snapback]

Non-destructively? No. You'll need to migrate your data to a reserve-storage solution before re-mk.fs'ing

Having files that are mostly < 600mb-1gb in size does not justify choosing xfs as your fs. You can do without the additional disk-thrashing during simultaneous writes as well. Notwithstanding, it's a fine fs for media-creation. I personally use it on several boxen with raided scsi, and I love it.

For all-round performance on your desktop machine, though, stick with ext3.

If you choose to use ext3, my suggestion would be to do the following upon fs-creation:

[after mkfs.ext3..]

tune2fs -O has_journal,dir_index -o journal_data,acl /dev/hdXY

(this will ensure full-journaling, access control lists, and b-tree hashes for faster listings of large directories.)

Keep in mind that while some fs-types outperform others in certain benchmarks, efficient disk-operation occasionally requires a combination of fs-types. It's up to you to figure out how you'll be using your computer, and take the necessary steps to configure it accordingly.

Edited by sentio
  sentio said:
Non-destructively? No. You'll need to migrate your data to a reserve-storage solution before re-mk.fs'ing

Having files that are mostly < 600mb-1gb in size does not justify choosing xfs as your fs. You can do without the additional disk-thrashing during simultaneous writes as well. Notwithstanding, it's a fine fs for media-creation. I personally use it on several boxen with raided scsi, and I love it.

For all-round performance on your desktop machine, though, stick with ext3.

If you choose to use ext3, my suggestion would be to do the following upon fs-creation:

[after mkfs.ext3..]

tune2fs -O has_journal,dir_index -o journal_data,acl /dev/hdXY

(this will ensure full-journaling, access control lists, and b-tree hashes for faster listings of large directories.)

Keep in mind that while some fs-types outperform others in certain benchmarks, efficient disk-operation occasionally requires a combination of fs-types. It's up to you to figure out how you'll be using your computer, and take the necessary steps to configure it accordingly.

586371551[/snapback]

thanks for the advice :)

I' building a new Gentoo system and I have a simillar question, I can't decide between Ext3 and ReiserFS, it says ReiserFS is good at dealing with small files (4k or smaller) does that mean it will be slower (than Ext3) when dealing with bigger files?

I dunno, I may just give it a shot...

  msg43 said:
Umm.....

Are you sure I don't know much about file systems, but this is on the 2.6.11.* kernel mabye even lower

  Kernel2.6.13rc5 said:
ReiserFS extended attributes (REISERFS_FS_XATTR)

Extended attributes are name:value pairs associated with inodes by

the kernel or by users (see the attr(5) manual page, or visit

<http://acl.bestbits.at/> for details).

If unsure, say N.

586370836[/snapback]

I'm not sure what you mean, "Are you sure I don't know much about file systems", my comment wasn't a slight on you.

Linux has had support for Reiser3 xattr for a while now, but not 4. What you quoted has nothing to do with Reiser4. If no xattr is found, then Beagle jumps to SQLite, which is slow in comparison. This is why I don't always suggest Reiser4 for desktop use.

  Knight said:
I'm not sure what you mean, "Are you sure I don't know much about file systems", my comment wasn't a slight on you.

Linux has had support for Reiser3 xattr for a while now, but not 4. What you quoted has nothing to do with Reiser4. If no xattr is found, then Beagle jumps to SQLite, which is slow in comparison. This is why I don't always suggest Reiser4 for desktop use.

Oh ok I thought you were talking about reiserfs my mistake :blush:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This guy is just salty that Waymo is about to get buried by a company with cars that cost significantly less, charge significantly lower fares, and will soon dramatically outnumber their fleet. Waymo made the mistake of not reducing their vehicle cost quick enough and not overcoming their route limitations. Unless they start allowing their cars to use the freeways and have significantly wider geofencing, they're going to soon join the list of discontinued Google products. If Tesla wasn't the one to make them irrelevant, somebody else soon was. There's a long list of companies designing robotaxis right now.
    • LOL. Hard to believe people still fall for this. If you are having some sort of issue, I would work on fixing that instead turning off these settings.
    • That is a great option for compatibility, but in my opinion, that isn't the future. Xorg/Xserver is outdated with massive security holes and limitations built into the core design, which cannot be easily fixed. The reason Wayland exists is because it was apparent that no one had the resources/will to revamp Xorg, so it was basically put into a support only mode until it was eventually abandoned. Yes, X11Libre has taken up the mantal, but I don't expect to see anything from them other than basic support.
    • I agree with your frustrations, but after nearly a decade of Wayland ideologs debating how software they don't write should work...its time to rip the band aid of X11 off and let Wayland sink or swim on its own. Its not like Linux can just fail at this point, so devs will flock together to find solutions. It is my opinion that a lot of these silly debates about things like window decorations take place because they can. People feel like they have time to have these academic conversations to "get it right." However, the conversation will change very quickly when the issue is "###### don't work." People will quickly find fixes once we are forced into that mode. I draw a parallel to the infancy of the internet going public in the late 1980s. It became quickly apparent that IPv4 really wasn't up to the task. The ivory tower response to the issues was basically "your doing it wrong, you shouldn't want that" while debating long-off solutions like IPv6. Then some rando cames along and invited NAT, the standards people saw it as an abomination and absolutely refused to include it. He didn't care, sold the product anyway under the name PIX, which he later sold to Cisco. It was not only a massive success, but it changed the entire concept of the internet, basically inventing the idea of public and privet addresses, which totally reformed the way the internet works. The standards guys were forced to adopt it once they realized it was impossible to put the cat back in the bag.
    • Download How to Engage Buyers and Drive Growth in the Age of AI (worth $22.95) for free by Steven Parker Claim your complimentary eBook worth $22.95 for free, before the offer ends on July 1. Develop stronger, more profitable relationships with your buyers in the digital era. Right now, how we buy and sell is evolving dramatically. People have fundamentally changed the way they do business. To put it simply: buyers no longer interact with sellers in the same way. To ensure a profitable future, sales leaders and teams need to embrace this transformation. In the face of globalisation, ecommerce, subscription services, and new digital tools for buyers and sellers alike, you need new strategies to generate successful sales and better bottom lines. Deep Selling shares the cutting-edge sales model you need to create a buyer-obsessed, high-performance culture. Your team urgently needs to embrace the growing suite of digital and AI technologies. But new technologies alone won’t solve all your selling problems. To really maximise your success, you need to evolve your selling frameworks and behaviours. You need to use these new tools in smart ways, embedding them into your sales execution models. In this book, you’ll discover how to: Audit the current sales techniques and cycles in your organisation Transform your sales execution models Achieve organisational buy-in through new performance measures and shared goals for success Use data to drive strategy, and revolutionise your selling with the latest digital and AI tools Build deeper buyer relationships that create more value and improve buyer outcomes With Deep Selling, you and your team will learn how to meet buyers on today’s real-world terms — and engage them more fully and successfully than ever before. This free to download offer expires July 1. How to get it Please ensure you read the terms and conditions to claim this offer. Complete and verifiable information is required in order to receive this free offer. If you have previously made use of these free offers, you will not need to re-register. While supplies last! Download How to Engage Buyers and Drive Growth in the Age of AI (worth $22.95) for free Offered by Wiley, view other free resources The below offers are also available for free in exchange for your (work) email: Excel Quick and Easy ($12 Value) FREE – Expires 6/24 The Inclusion Equation: Leveraging Data & AI ($21 Value) FREE – Expires 6/24 Microsoft 365 Copilot At Work ($60 Value) FREE – Expires 6/25 Natural Language Processing with Python ($39.99 Value) FREE – Expires 6/25 How to Engage Buyers and Drive Growth in the Age of AI ($22.95 Value) FREE – Expires 7/1 Using Artificial Intelligence to Save the World ($30.00 Value) FREE – Expires 7/1 Essential: How Distributed Teams, Generative AI, [...] ($18.00 Value) FREE – Expires 7/2 The Chief AI Officer's Handbook: Master AI leadership with strategies to innovate, overcome challenges, and drive business growth ($9.99 Value) FREE for a Limited Time – Expires 7/2 The Ultimate Linux Newbie Guide – Featured Free content Python Notes for Professionals – Featured Free content Learn Linux in 5 Days – Featured Free content Quick Reference Guide for Cybersecurity – Featured Free content We post these because we earn commission on each lead so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. Other ways to support Neowin The above deal not doing it for you, but still want to help? Check out the links below. Check out our partner software in the Neowin Store Buy a T-shirt at Neowin's Threadsquad Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: An account at Neowin Deals is required to participate in any deals powered by our affiliate, StackCommerce. For a full description of StackCommerce's privacy guidelines, go here. Neowin benefits from shared revenue of each sale made through the branded deals site.
  • Recent Achievements

    • Week One Done
      fredss earned a badge
      Week One Done
    • Dedicated
      fabioc earned a badge
      Dedicated
    • One Month Later
      GoForma earned a badge
      One Month Later
    • Week One Done
      GoForma earned a badge
      Week One Done
    • Week One Done
      ravenmanNE earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      652
    2. 2
      Michael Scrip
      226
    3. 3
      ATLien_0
      219
    4. 4
      +FloatingFatMan
      146
    5. 5
      Steven P.
      137
  • Tell a friend

    Love Neowin? Tell a friend!